2.6.9-rc1-mm3 IDE cdrom bug

From: Sid Boyce
Date: Sun Sep 05 2004 - 16:11:04 EST

Next message: Jon Smirl: "Re: New proposed DRM interface design"
Previous message: Lee Revell: "Re: [patch] voluntary-preempt-2.6.9-rc1-bk12-R5"
Next in thread: Sid Boyce: "RE: 2.6.9-rc1-mm3 IDE cdrom bug"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Experienced both on AMD x86 and x86_64. SuSE 9.1.
Issuing "ls /media/cdrom" will usually list, then the box hangs solid, needing a hard reset. If the kernel is built without PREEMPT, "/media/cdrom: no such file or directory" and /var/log/messages says......
automount [6670]: mount (generic): failed to mount /dev/cdrom (type auto) on /media/cdrom
automount [6670]: >> mount: /dev/cdrom is not a valid block device

# mount /dev/hdc /mnt
mount: /dev/hdc is not a valid block device

With PREEMPT=y
================= ALT-SYSRQ-? does nothing.
After one hang, SYSRQ-B, CTRL-ALT-DEL
System going down for reboot now
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
INIT: Sending processes the KILL signal
INIT: Pid 8949 [id 2] seems to hang
---- ditto 8950-8953 [id 3-6] -------
Boot logging started on /dev/tty1 (/dev/console) at Sun Sep 5 14:46:32 2004
Master Resource Control: previous runlevel: 3, switching to runlevel: 6
Shutting down xinetd: done

.config for x86_64
==============
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.9-rc1-mm3
# Sun Sep 5 14:23:47 2004
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_KERNEL_EVENTS=y
CONFIG_AUDITSYSCALL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y

#
# Performance-monitoring counters support
#
CONFIG_PERFCTR=y
CONFIG_PERFCTR_INIT_TESTS=y
CONFIG_PERFCTR_VIRTUAL=y
CONFIG_PERFCTR_INTERRUPT_SUPPORT=y

#
# Power management options
#
# CONFIG_PM is not set
# CONFIG_PM_DEBUG is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_ASUS=y
CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_PROC_INTF=m
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_24_API is not set
CONFIG_CPU_FREQ_TABLE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_UNORDERED_IO is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y

#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
CONFIG_PCMCIA_DEBUG=y
CONFIG_YENTA=m
CONFIG_CARDBUS=y
# CONFIG_PD6729 is not set
CONFIG_I82092=m
CONFIG_TCIC=m

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_UID16=y
CONFIG_KEXEC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_PC_PCMCIA is not set
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=128000
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=128000
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8212 is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_IVB=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_ITERAID is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
CONFIG_PCMCIA_FDOMAIN=m
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y

#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m

#
# I2O device support
#
CONFIG_I2O=y
CONFIG_I2O_CONFIG=y
CONFIG_I2O_BLOCK=m
# CONFIG_I2O_SCSI is not set
CONFIG_I2O_PROC=y

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m

#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_PHYSDEV=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m

#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
# CONFIG_IP6_NF_RAW is not set

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
# CONFIG_ROSE is not set

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m

#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m

#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HIDP is not set

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_PCMCIA_XIRTULIP is not set
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not set
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_B44=m
CONFIG_FORCEDETH=m
CONFIG_DGRS=m
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=m
# CONFIG_E100_NAPI is not set
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_VIA_VELOCITY is not set

#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
# CONFIG_R8169_VLAN is not set
CONFIG_SK98LIN=m
CONFIG_TIGON3=m

#
# Ethernet (10000 Mbit)
#
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_RAW=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL_MCH is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_SIS is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=m
# CONFIG_HPET is not set
CONFIG_MAX_RAW_DEVS=4096
CONFIG_HANGCHECK_TIMER=m

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
# CONFIG_I2C_PCA_ISA is not set

#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m

#
# Other I2C Chip support
#
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_RTC8564=m
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_I2C_DEBUG_CHIP=y

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
CONFIG_VIDEO_OVCAMCHIP=m

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=m
# CONFIG_FB_RADEON_I2C is not set
CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_BIT32_EMUL=m
CONFIG_SND_RTCTIMER=m
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_MEMORY=y
CONFIG_SND_DEBUG_DETECT=y

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m

#
# PCMCIA devices
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=m
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set

#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_RW_DETECT=y
CONFIG_USB_STORAGE_DATAFAB=y
# CONFIG_USB_STORAGE_FREECOM is not set
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_HP8200e is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
CONFIG_USB_WACOM=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
CONFIG_USB_OV511=m
# CONFIG_USB_SE401 is not set
CONFIG_USB_SN9C102=m
# CONFIG_USB_STV680 is not set
CONFIG_USB_W9968CF=m

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_SA1100 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_OMAP is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
CONFIG_USB_G_SERIAL=m

#
# Firmware Drivers
#
# CONFIG_EDD is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_REISER4_FS=m
CONFIG_REISER4_LARGE_KEY=y
# CONFIG_REISER4_CHECK is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_KEYFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_POSIX is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_FRAME_POINTER is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_ROOTPLUG=m
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
# CONFIG_SECURITY_SELINUX_MLS is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WHIRLPOOL=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m

/var/log/boot.msg (Without preempt)
=============
Inspecting /boot/System.map-2.6.9-rc1-mm3
Loaded 30154 symbols from /boot/System.map-2.6.9-rc1-mm3.
Symbols match kernel version 2.6.9.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<4>Bootdata ok (command line is root=/dev/hda1 vga=0x317 hdc=ide-cd desktop splash=silent pci=routeirq)
<4>Linux version 2.6.9-rc1-mm3 (root@Boycie) (gcc version 3.3.3 (SuSE Linux)) #3 Sun Sep 5 16:14:49 BST 2004
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
<4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
<4> BIOS-e820: 000000001fef0000 - 000000001fefb000 (ACPI data)
<4> BIOS-e820: 000000001fefb000 - 000000001ff00000 (ACPI NVS)
<4> BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
<4> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
<6>No mptable found.
<7>On node 0 totalpages: 130800
<7> DMA zone: 4096 pages, LIFO batch:1
<7> Normal zone: 126704 pages, LIFO batch:16
<7> HighMem zone: 0 pages, LIFO batch:1
<7>ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f68c0
<7>ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000001fef5d48
<7>ACPI: FADT (v002 AMDK8 PTLTW 0x06040000 PTL_ 0x000f4240) @ 0x000000001fefae56
<7>ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000001fefaeda
<7>ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x000000001fefafb0
<7>ACPI: DSDT (v001 VIA PTL_ACPI 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>Processor #0 15:4 APIC version 16
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: Assigned apic_id 1
<6>IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<6>Using ACPI (MADT) for SMP configuration information
<4>Checking aperture...
<4>CPU 0: aperture @ e0000000 size 256 MB
<4>Built 1 zonelists
<4>Initializing CPU#0
<4>Kernel command line: root=/dev/hda1 vga=0x317 hdc=ide-cd desktop splash=silent pci=routeirq console=tty0
<6>ide_setup: hdc=ide-cd
<4>PID hash table entries: 2048 (order: 11, 65536 bytes)
<6>time.c: Using 1.193182 MHz PIT timer.
<6>time.c: Detected 1794.915 MHz processor.
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>Memory: 510340k/523200k available (2375k kernel code, 12156k reserved, 1171k data, 168k init)
<7>Calibrating delay loop... 3538.94 BogoMIPS (lpj=1769472)
<6>Security Scaffold v1.0.0 initialized
<6>SELinux: Initializing.
6>SELinux: Starting in permissive mode
<6>There is already a security framework initialized, register_security failed.
<6>selinux_register_security: Registering secondary module capability
<6>Capability LSM initialized as secondary
<4>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 1024K (64 bytes/line)
<4>CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 08
<6>Using local APIC NMI watchdog using perfctr0
<4>ENABLING IO-APIC IRQs
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=-1
<6>Using local APIC timer interrupts.
<6>Detected 12.464 MHz APIC timer.
<6>NET: Registered protocol family 16
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20040816
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<4>ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
<4>ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
<4>ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled.
<4>ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *10, disabled.
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
<6>ACPI: Embedded Controller [EC] (gpe 11)
<6>PCI: Using ACPI for IRQ routing
<6>** Routing PCI interrupts for all devices because "pci=routeirq"
<6>** was specified. If this was required to make a driver work,
<6>** please email the output of "lspci" to bjorn.helgaas@xxxxxx
<6>** so I can fix the driver.
<7>IOAPIC[0]: Set PCI routing entry (1-17 -> 0xa9 -> IRQ 17 Mode:1 Active:1)
<6>ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 17
<7>IOAPIC[0]: Set PCI routing entry (1-18 -> 0xb1 -> IRQ 18 Mode:1 Active:1)
<6>ACPI: PCI interrupt 0000:00:0b.1[B] -> GSI 18 (level, low) -> IRQ 18
<7>IOAPIC[0]: Set PCI routing entry (1-19 -> 0xb9 -> IRQ 19 Mode:1 Active:1)
<6>ACPI: PCI interrupt 0000:00:0b.2[C] -> GSI 19 (level, low) -> IRQ 19
<7>IOAPIC[0]: Set PCI routing entry (1-20 -> 0xc1 -> IRQ 20 Mode:1 Active:1)
<6>ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
<7>IOAPIC[0]: Set PCI routing entry (1-21 -> 0xc9 -> IRQ 21 Mode:1 Active:1)
<6>ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
<6>ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 21
<6>ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
<6>ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21
<4>ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
<7>IOAPIC[0]: Set PCI routing entry (1-22 -> 0xd1 -> IRQ 22 Mode:1 Active:1)
<6>ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
<6>ACPI: PCI interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 22
<7>IOAPIC[0]: Set PCI routing entry (1-16 -> 0xd9 -> IRQ 16 Mode:1 Active:1)
<6>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>number of MP IRQ sources: 15.
<7>number of IO-APIC #1 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #1......
<7>.... register #00: 01000000
<7>....... : physical APIC id: 01
<7>.... register #01: 00178003
<7>....... : max redirection entries: 0017
<7>....... : PRQ implemented: 1
<7>....... : IO APIC version: 0003
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 001 01 0 0 0 0 0 1 1 39
<7> 02 001 01 0 0 0 0 0 1 1 31
<7> 03 001 01 0 0 0 0 0 1 1 41
<7> 04 001 01 0 0 0 0 0 1 1 49
<7> 05 001 01 0 0 0 0 0 1 1 51
<7> 06 001 01 0 0 0 0 0 1 1 59
<7> 07 001 01 0 0 0 0 0 1 1 61
<7> 08 001 01 0 0 0 0 0 1 1 69
<7> 09 001 01 0 1 0 1 0 1 1 71
<7> 0a 001 01 0 0 0 0 0 1 1 79
<7> 0b 001 01 0 0 0 0 0 1 1 81
<7> 0c 001 01 0 0 0 0 0 1 1 89
<7> 0d 001 01 0 0 0 0 0 1 1 91
<7> 0e 001 01 0 0 0 0 0 1 1 99
<7> 0f 001 01 0 0 0 0 0 1 1 A1
<7> 10 001 01 1 1 0 1 0 1 1 D9
<7> 11 001 01 1 1 0 1 0 1 1 A9
<7> 12 001 01 1 1 0 1 0 1 1 B1
<7> 13 001 01 1 1 0 1 0 1 1 B9
<7> 14 001 01 1 1 0 1 0 1 1 C1
<7> 15 001 01 1 1 0 1 0 1 1 C9
<7> 16 001 01 1 1 0 1 0 1 1 D1
<7> 17 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ3 -> 0:3
<7>IRQ4 -> 0:4
<7>IRQ5 -> 0:5
<7>IRQ6 -> 0:6
<7>IRQ7 -> 0:7
<7>IRQ8 -> 0:8
<7>IRQ9 -> 0:9
<7>IRQ10 -> 0:10
<7>IRQ11 -> 0:11
<7>IRQ12 -> 0:12
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<7>IRQ16 -> 0:16
<7>IRQ17 -> 0:17
<7>IRQ18 -> 0:18
<7>IRQ19 -> 0:19
<7>IRQ20 -> 0:20
<7>IRQ21 -> 0:21
<7>IRQ22 -> 0:22
<6>.................................... done.
<6>agpgart: Detected AGP bridge 0
<6>agpgart: Maximum main memory to use for agp memory: 438M
<6>agpgart: AGP aperture is 256M @ 0xe0000000
<6>PCI-DMA: Disabling IOMMU.
<6>vesafb: framebuffer at 0xd8000000, mapped to 0xffffff0000180000, size 3072k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=41
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>fb0: VESA VGA frame buffer device
<7>vga16fb: initializing
<6>vga16fb: mapped to 0x00000100000a0000
<6>fb1: VGA16 VGA frame buffer device
<4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
<6>audit: initializing netlink socket (disabled)
<3>audit(1094398664.173:0): initialized
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>SELinux: Registering netfilter hooks
<6>Initializing Cryptographic API
<6>ACPI: AC Adapter [AC] (on-line)
<6>ACPI: Battery Slot [BAT0] (battery present)
<6>ACPI: Power Button (FF) [PWRF]
<6>ACPI: Lid Switch [LID]
<6>ACPI: Sleep Button (CM) [SLPB]
<6>ACPI: Processor [CPU0] (supports C1)
<6>ACPI: Thermal Zone [THRS] (50 C)
<7>Losing some ticks... checking if CPU frequency changed.
<6>ACPI: Thermal Zone [THRC] (70 C)
<4>Console: switching to colour frame buffer device 128x48
<6>Real Time Clock Driver v1.12
<6>Non-volatile memory driver v1.2
<6>Linux agpgart interface v0.100 (c) Dave Jones
<7>IOAPIC[0]: Set PCI routing entry (1-1 -> 0x39 -> IRQ 1 Mode:0 Active:0)
<4>i8042: ACPI [PS2K] at I/O 0x60, 0x64, irq 1
<7>IOAPIC[0]: Set PCI routing entry (1-12 -> 0x89 -> IRQ 12 Mode:0 Active:0)
<4>i8042: ACPI [PS2M] at irq 12
<6>i8042.c: Detected active multiplexing controller, rev 1.1.
<6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
<6>parport0: irq 7 detected
<4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<5>pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@xxxxxxx) and petero2@xxxxxxxxx
<4>netconsole: not configured, aborting
6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: IDE controller at PCI slot 0000:00:11.1
<4>ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
<6>VP_IDE: chipset revision 6
<6>VP_IDE: not 100%% native mode: will probe irqs later
<6>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
<6> ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
<6> ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:pio, hdd:pio
<7>Probing IDE interface ide0...
<4>hda: TOSHIBA MK4025GAS, ATA DISK drive
<4>Using anticipatory io scheduler
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<7>Probing IDE interface ide1...
<7>Probing IDE interface ide1...
<7>Probing IDE interface ide2...
<7>ide2: Wait for ready failed before probe !
<7>Probing IDE interface ide3...
<7>ide3: Wait for ready failed before probe !
<7>Probing IDE interface ide4...
<7>ide4: Wait for ready failed before probe !
<7>Probing IDE interface ide5...
<7>ide5: Wait for ready failed before probe !
<6>hda: max request size: 128KiB
<6>hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(100)
<7>hda: cache flushes supported
<6> hda: hda1 hda2
<6>mice: PS/2 mouse device common for all mice
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>Synaptics Touchpad, model: 1
<6> Firmware: 5.8
<6> 180 degree mounted touchpad
<6> Sensor: 18
<6> new absolute packet format
<6> Touchpad has extended capability bits
<6> -> 4 multi-buttons, i.e. besides standard buttons
<6> -> multifinger detection
<6> -> palm detection
<6>input: SynPS/2 Synaptics TouchPad on isa0060/serio4
<6>input: PC Speaker
<6>I2O Core - (C) Copyright 1999 Red Hat Software
<6>i2o: max_drivers=4
<6>I2O configuration manager v 0.04.
<6> (C) Copyright 1999 Red Hat Software
<6>Please email the following PERFCTR INIT lines to mikpe@xxxxxxxxx
<6>To remove this message, rebuild the driver with CONFIG_PERFCTR_INIT_TESTS=n
<6>PERFCTR INIT: vendor 2, family 15, model 4, stepping 8, clock 1794915 kHz
<6>PERFCTR INIT: NITER == 64
<6>PERFCTR INIT: loop overhead is 244 cycles
<6>PERFCTR INIT: rdtsc cost is 9.4 cycles (851 total)
<6>PERFCTR INIT: rdpmc cost is 9.7 cycles (869 total)
<6>PERFCTR INIT: rdmsr (counter) cost is 51.0 cycles (3508 total)
<6>PERFCTR INIT: rdmsr (evntsel) cost is 56.6 cycles (3868 total)
<6>PERFCTR INIT: wrmsr (counter) cost is 71.9 cycles (4851 total)
<6>PERFCTR INIT: wrmsr (evntsel) cost is 328.4 cycles (21264 total)
<6>PERFCTR INIT: read cr4 cost is 6.0 cycles (629 total)
<6>PERFCTR INIT: write cr4 cost is 67.0 cycles (4535 total)
<6>PERFCTR INIT: write LVTPC cost is 25.2 cycles (1863 total)
<6>PERFCTR INIT: sync_core cost is 164.1 cycles (10752 total)
<6>perfctr: driver 2.7.5, cpu type AMD K7/K8 at 1794915 kHz
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 32768)
<6>NET: Registered protocol family 1
<5>ReiserFS: hda1: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda1: using ordered data mode
<5>ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda1: checking transaction log (hda1)
<5>ReiserFS: hda1: Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<4>Freeing unused kernel memory: 168k freed
<6>Adding 1927792k swap on /dev/hda2. Priority:42 extents:1
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Sun Sep 5 16:38:10 2004

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>start services (random isdn hotplug)
Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)done
Initializing random number generatordone
<notice>exit status of (random isdn hotplug) is (0 0 0)
<notice>start services (coldplug)
coldplug scanning input: done
scanning pci: .**********.WW****Wdone
scanning usb: done
. . . . . . . . . . . . . . . . . . . . . . . .done
<notice>exit status of (coldplug) is (0)
<notice>start services (pcmcia)
Starting PCMCIA <notice>startproc: execve (/sbin/cardmgr) [ /sbin/cardmgr ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=24 INIT_VERSION=sysvin
it-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 splash=sil
ent sscripts=57 _=/sbin/startproc DAEMON=/sbin/cardmgr ]
cardmgr[2695]: socket 0: Serial or Modem

done
<notice>exit status of (pcmcia) is (0)
<notice>start services (modem)
<notice>exit status of (modem) is (0)
<notice>start services (network)
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
doneWaiting for mandatory devices: eth-id-00:0a:e4:4e:a1:42
20 19 18 16
eth0 device: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
eth0 configuration: eth-id-00:0a:e4:4e:a1:42
eth0 IP address: 192.168.10.5/24
done ppp0
ppp0 Startmode is 'manual'
skippedSetting up service network . . . . . . . . . . . . . . . .done
<notice>exit status of (network) is (0)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/dhcp/dev/log -a /var/lib/named/dev/log -a /var/lib/ntp/dev/log
], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/u
sr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 splash=silent sscripts=57 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=27 INIT_VERSION=sysvinit-2.85 REDI
RECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 splash=silent sscripts
=57 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (webmin splash_early smbfs resmgr portmap bluetooth)
Mount SMB/ CIFS File Systems unused
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=28 INIT_VERSION=sysvinit-2.85 REDIRECT
=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 splash=silent sscripts=57
_=/sbin/startproc DAEMON=/sbin/portmap ]
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=28 INIT_VERSION=sysvinit-2.85 REDIRECT
=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 splash=silent sscripts=57
_=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting RPC portmap daemondone
Starting resource managerdone
<notice>startproc: execve (/usr/sbin/hcid) [ /usr/sbin/hcid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=28 INIT_VERSION=sysvinit-2.85 REDIRE
CT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 splash=silent sscripts=5
7 _=/sbin/startproc DAEMON=/usr/sbin/hcid ]
<notice>startproc: execve (/usr/sbin/sdpd) [ /usr/sbin/sdpd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=28 INIT_VERSION=sysvinit-2.85 REDIRE
CT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 splash=silent sscripts=5
7 _=/sbin/startproc DAEMON=/usr/sbin/sdpd ]
Starting bluetooth ...(hci_usb hci_uart hci_vhci )done
<notice>exit status of (webmin splash_early smbfs resmgr portmap bluetooth) is (0 0 6 0 0 0)
<notice>start services (nfsboot)
Starting nfsboot (sm-notify) done
<notice>exit status of (nfsboot) is (0)
<notice>start services (sshd running-kernel mysql fbset alsasound acpid)
<notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=35 INIT_VERSION=sysvinit-2.85 REDI
RECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 splash=silent sscripts
=57 _=/sbin/startproc DAEMON=/usr/sbin/acpid ]
Loading ACPI modules () done
Starting acpid done
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=35
INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=4
8 SHLVL=2 splash=silent sscripts=57 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
Starting sound driver: via82xxdone
Restoring the previous sound settingdone
<notice>exit status of (sshd running-kernel mysql fbset alsasound acpid) is (0 0 0 0 0 0)
<notice>start services (splash kbd cpufreqd)
<notice>startproc: execve (/usr/sbin/cpufreqd) [ /usr/sbin/cpufreqd -d -a /proc/acpi/ac_adapter/AC/state ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh
progress=41 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVE
L=N LINES=48 SHLVL=2 splash=silent sscripts=57 _=/sbin/startproc DAEMON=/usr/sbin/cpufreqd ]
Starting cpufreqd done
Loading keymap qwerty/uk.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial (K
done<notice>exit status of (splash kbd cpufreqd) is (5 0 0)
<notice>start services (xntpd xfs powersaved hwscan)
Starting hardware scan on boot<notice>checkproc: cpufreqd 4831
cpufreqd already running, stop it first and restart serviceskipped
<notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/lib/ntp/var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console TERM=linux
SHELL=/bin/sh progress=44 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5
PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 splash=silent sscripts=57 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
Try to get initial date and time via NTP from 128.118.25.3done
Starting network time protocol daemon (NTPD)done
Starting X Font Server<notice>startproc: execve (/usr/X11R6/bin/xfs) [ /usr/X11R6/bin/xfs -nodaemon -user nobody -port 7100 ], [ CONSOLE=/dev/console TERM=l
inux SHELL=/bin/sh progress=44 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEV
EL=5 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 splash=silent sscripts=57 _=/sbin/startproc DAEMON=/usr/X11R6/bin/xfs ]
done

<notice>exit status of (xntpd xfs powersaved hwscan) is (0 0 5 0)
<notice>start services (smpppd cups)
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=48 INIT_VERSION=sysvinit-2.85 RE
DIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 splash=silent sscrip
ts=57 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
Starting SMPPPDdone
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=48 INIT_VERSION=sysv
init-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 splash=s
ilent sscripts=57 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
<notice>exit status of (smpppd cups) is (0 0)
<notice>start services (nscd)
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=50
INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=4
8 SHLVL=2 splash=silent sscripts=57 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>exit status of (nscd) is (0)
<notice>start services (xdm postfix autofs)
Starting service automounterdone
<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib
/qt3 LC_ALL= progress=51 INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin
LC_MESSAGES= vga=0x317 RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=en_GB.UTF-8 PREVLEVEL=N LINES=48 SHLVL=2 XCURSOR_THEME=blueprint-cursor-theme no_proxy=localhost W
INDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=en_GB.UTF-8 splash=silent sscripts=57 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
Starting service kdmdone
Starting mail service (Postfix)done
<notice>exit status of (xdm postfix autofs) is (0 0 0)
<notice>start services (apache2)
Starting httpd2 (prefork) <notice>startproc: execve (/usr/sbin/httpd2-prefork) [ /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf ], [ CONSOLE=/dev/conso
le TERM=linux SHELL=/bin/sh get_module_list_done=true progress=54 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 get_includes_done=true PATH=/usr
/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 splash=silent sscripts=57 _=/sbin/startproc DAEMON=/usr/sb
in/httpd2-prefork ]
done
<notice>exit status of (apache2) is (0)
<notice>start services (xinetd cron)
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=55 INIT_VERSION=sysvinit-2.85 REDIRE
CT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 splash=silent sscripts=5
7 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
Starting INET services. (xinetd)<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=
55 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES
=48 SHLVL=2 splash=silent sscripts=57 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
done
<notice>exit status of (xinetd cron) is (0 0)
<notice>start services (splash_late)
<notice>exit status of (splash_late) is (0)
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: smbfs splash powersaved

<GOT TIRED OF C&P - attaching a file in thunderbird doesn't work on this kernel either>
Regards
Sid.

--
Sid Boyce .... Hamradio G3VBV and keen Flyer
=====LINUX ONLY USED HERE=====

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Jon Smirl: "Re: New proposed DRM interface design"
Previous message: Lee Revell: "Re: [patch] voluntary-preempt-2.6.9-rc1-bk12-R5"
Next in thread: Sid Boyce: "RE: 2.6.9-rc1-mm3 IDE cdrom bug"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]