[patch 13/25] drivers/char/specialix.c MIN/MAX removal

[janitor]

Patch (against 2.6.7) removes unnecessary min/max macros and changes
calls to use kernel.h macros instead.

Feedback is always welcome
Michael

Signed-off-by: Maximilian Attems <janitor@xxxxxxxxxxxxxx>



---

 linux-2.6.9-rc1-bk7-max/drivers/char/specialix.c |   14 +++++---------
 1 files changed, 5 insertions(+), 9 deletions(-)

diff -puN drivers/char/specialix.c~min-max-char_specialix drivers/char/specialix.c
--- linux-2.6.9-rc1-bk7/drivers/char/specialix.c~min-max-char_specialix	2004-09-01 19:34:12.000000000 +0200
+++ linux-2.6.9-rc1-bk7-max/drivers/char/specialix.c	2004-09-01 19:34:12.000000000 +0200
@@ -135,10 +135,6 @@
 	 ASYNC_SPD_HI       | ASYNC_SPEED_VHI    | ASYNC_SESSION_LOCKOUT | \
 	 ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
 
-#ifndef MIN
-#define MIN(a,b) ((a) < (b) ? (a) : (b))
-#endif
-
 #undef RS_EVENT_WRITE_WAKEUP
 #define RS_EVENT_WRITE_WAKEUP	0
 
@@ -159,7 +155,7 @@ static struct specialix_board sx_board[S
 };
 
 static struct specialix_port sx_port[SX_NBOARD * SX_NPORT];
-		
+
 
 #ifdef SPECIALIX_TIMER
 static struct timer_list missed_irq_timer;
@@ -715,7 +711,7 @@ static inline void sx_transmit(struct sp
 				sx_out(bp, CD186x_TDR, CD186x_C_SBRK);
 				port->COR2 &= ~COR2_ETC;
 			}
-			count = MIN(port->break_length, 0xff);
+			count = min_t(int, port->break_length, 0xff);
 			sx_out(bp, CD186x_TDR, CD186x_C_ESC);
 			sx_out(bp, CD186x_TDR, CD186x_C_DELAY);
 			sx_out(bp, CD186x_TDR, count);
@@ -1506,7 +1502,7 @@ static int sx_write(struct tty_struct * 
 	if (from_user) {
 		down(&tmp_buf_sem);
 		while (1) {
-			c = MIN(count, MIN(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
+			c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
 					   SERIAL_XMIT_SIZE - port->xmit_head));
 			if (c <= 0)
 				break;
@@ -1519,7 +1515,7 @@ static int sx_write(struct tty_struct * 
 			}
 
 			cli();
-			c = MIN(c, MIN(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
+			c = min_t(int, c, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
 				       SERIAL_XMIT_SIZE - port->xmit_head));
 			memcpy(port->xmit_buf + port->xmit_head, tmp_buf, c);
 			port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
@@ -1534,7 +1530,7 @@ static int sx_write(struct tty_struct * 
 	} else {
 		while (1) {
 			cli();
-			c = MIN(count, MIN(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
+			c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
 					   SERIAL_XMIT_SIZE - port->xmit_head));
 			if (c <= 0) {
 				restore_flags(flags);

_
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/