Re: PATCH: cdrecord: avoiding scsi device numbering for ide devices

[Karol Kozimor]

On Monday 09 of August 2004 14:24, Joerg Schilling wrote:
> On Linux, it is impossible to run cdrecord without root privilleges.
> Make cdrecord suid root, it has been audited....

[kkozimor@athlon1 kkozimor]$ cdrecord dev=/dev/hdd -atip
Cdrecord-Clone 2.01a31-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg 
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to 
<warly@xxxxxxxxxxxxxxxx>.
Note: The author of cdrecord should not be bothered with problems in this 
version.
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'LITE-ON '
Identifikation : 'COMBO LTC-48161H'
Revision       : 'KH0M'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -11607 (97:27/18)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
[kkozimor@athlon1 kkozimor]$ ls -l `which cdrecord`
-rwxr-xr-x  1 root root 320148 cze 14 18:16 /usr/bin/cdrecord

Go figure...

-- 
Karol 'sziwan' Kozimor
sziwan@xxxxxxxxxxx
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/