PROBLEM: 2.6.7 Linux Kernel Crash While Detecting PCI Devices

From: John Riggs
Date: Fri Aug 06 2004 - 13:29:08 EST

Next message: Roger Luethi: "Re: [proc.txt] Fix /proc/pid/statm documentation"
Previous message: Thomas Richter: "Re: [PATCH] NetMOS 9805 ParPort interface"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Summary: 2.6.7 Linux Kernel Crash While Detecting PCI Devices
Please CC me on any replies.

Hi, I am responsible for maintaining a pre-boot Linux environment, for
which we use a 2.6.7 linux kernel, booted with the freeloader boot
loader. Our environment works well on most systems, but on this
particular model of laptop the kernel crashes before I get a shell
prompt. From the stack trace, it appears to be crashing during the PCI
device detection. The root filesystem is loaded into a ramdisk. The
crash doesn't always reproduce, and I'm not sure what changes that it
does or does not reproduce. But I see the crash on more than 50% of the
reboots.

Oops output from ksymoops:
Unable to handle kernel NULL pointer dereference at virtual address
00000008
c015f846
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c015f846>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246 (2.6.7)
eax: 0000000f ebx: df7ab1b8 ecx: c0270970 edx: 00007782
esi: df7ab178 edi: 00000000 ebp: c0276554 esp: df775ef8
ds: 007b es: 007b ss: 0068
Stack: c024ade6 df7ab1b8 df7ab178 df7ab378 df602c00 c019045f 00000000
c0276554
c01733b5 df7ab1f0 c0276554 df7ab1f0 df7ab238 c024e1d6 00000000
00000009
df602c00 df7ab378 00000009 00000001 c01734f4 df7ab378 df602c00
00000009
Call Trace:
[<c019045f>] [<c01733b5>] [<c01734f4>] [<c0173b6c>] [<c0173cb9>]
[<c023b34
Code: 8b 47 08 5e 8d 48 68 ff 48 68 0f 88 64 01 00 00 8b 5d 00 53

>>EIP; c015f846 <sysfs_add_file+16/a0> <=====

>>ebx; df7ab1b8 <pg0+1f4e51b8/3fd38000>
>>ecx; c0270970 <console_sem+0/10>
>>esi; df7ab178 <pg0+1f4e5178/3fd38000>
>>ebp; c0276554 <class_device_attr_cpuaffinity+0/14>
>>esp; df775ef8 <pg0+1f4afef8/3fd38000>

Trace; c019045f <class_device_create_file+1f/30>
Trace; c01733b5 <pci_alloc_child_bus+75/c0>
Trace; c01734f4 <pci_scan_bridge+b4/200>
Trace; c0173b6c <pci_scan_child_bus+8c/a0>
Trace; c0173cb9 <pci_scan_bus_parented+119/140>

Code; c015f846 <sysfs_add_file+16/a0>
00000000 <_EIP>:
Code; c015f846 <sysfs_add_file+16/a0> <=====
0: 8b 47 08 mov 0x8(%edi),%eax <=====
Code; c015f849 <sysfs_add_file+19/a0>
3: 5e pop %esi
Code; c015f84a <sysfs_add_file+1a/a0>
4: 8d 48 68 lea 0x68(%eax),%ecx
Code; c015f84d <sysfs_add_file+1d/a0>
7: ff 48 68 decl 0x68(%eax)
Code; c015f850 <sysfs_add_file+20/a0>
a: 0f 88 64 01 00 00 js 174 <_EIP+0x174>
Code; c015f856 <sysfs_add_file+26/a0>
10: 8b 5d 00 mov 0x0(%ebp),%ebx
Code; c015f859 <sysfs_add_file+29/a0>
13: 53 push %ebx

<0>Kernel panic: Attempted to kill init!

Output from lspci -vvv: (Note: lspci seemed to be stuck in an infinite
loop, printing the last two lines over and over)
00:00.0 Class f000: 0001:0000 (rev c3) (prog-if e2)
Subsystem: 69d5:f000
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping+ SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort+ <MAbort+ >SERR+ <PERR+
Latency: 105 (60000ns max), cache line size d5
Interrupt: pin (c) routed to IRQ 0
BIST is running
Region 0: I/O ports at <ignored>
Region 1: Memory at <ignored> (64-bit, non-prefetchable)
[disabled]
Region 3: I/O ports at <ignored>
Region 4: Memory at <ignored> (64-bit, prefetchable) [disabled]
Expansion ROM at f0006800 [disabled] [size=2K]

00:0d.0 Class c024: 0068:24cf (rev 60) (prog-if cf)
Subsystem: 1c24:44c7
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping+ SERR+ FastB2B+
Status: Cap+ 66Mhz- UDF+ FastB2B+ ParErr- DEVSEL=fast >TAbort+
<TAbort- <MAbort+ >SERR+ <PERR-
Interrupt: pin ,C (Brouted to IRQ 0
Region 0: Memory at <ignored> (32-bit, non-prefetchable)
[disabled]
Region 1: Memory at <ignored> (low-1M, prefetchable) [disabled]
Region 2: Memory at <ignored> (low-1M, non-prefetchable)
[disabled]
Region 3: I/O ports at <ignored> [disabled]
Region 4: I/O ports at <ignored> [disabled]
Region 5: Memory at <ignored> (type 3, non-prefetchable)
[disabled]
Expansion ROM at <unassigned> [disabled] [size=2K]

00:0e.0 Class 27bc: 6ce9:ffff (prog-if 8d)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop+
ParErr+ Stepping+ SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF+ FastB2B- ParErr- DEVSEL=?? >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: I/O ports at <ignored>
Region 1: Memory at <ignored> (32-bit, non-prefetchable)
Region 2: Memory at <ignored> (32-bit, non-prefetchable)
Region 3: Memory at <ignored> (32-bit, non-prefetchable)
Region 4: Memory at <ignored> (32-bit, non-prefetchable)
Region 5: I/O ports at <ignored>
Expansion ROM at 0001f800 [disabled] [size=2K]

00:0f.0 Class 26b4: c483:e910 (rev 90) (prog-if 8d)
Subsystem: 748d:0026
Control: I/O- Mem- BusMaster+ SpecCycle+ MemWINV+ VGASnoop+
ParErr- Stepping- SERR+ FastB2B+
Status: Cap+ 66Mhz+ UDF+ FastB2B+ ParErr+ DEVSEL=?? >TAbort+
<TAbort+ <MAbort+ >SERR+ <PERR+
Latency: 0 (34750ns min, 31000ns max)
Interrupt: pin P routed to IRQ 0
Region 0: I/O ports at <ignored> [disabled]
Region 1: Memory at <ignored> (32-bit, non-prefetchable)
[disabled]
Region 2: I/O ports at <ignored> [disabled]
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
[disabled]
Region 5: Memory at <ignored> (32-bit, prefetchable) [disabled]
Expansion ROM at e000b800 [disabled] [size=2K]
Capabilities: [fc] #c0 [c8a1]
Capabilities: [c0] #e8 [f9d4]
Capabilities: [d8] #85 [2274]
Capabilities: [c0] #e8 [f9d4]
Capabilities: [d8] #85 [2274]
Capabilities: [c0] #e8 [f9d4]
Capabilities: [d8] #85 [2274]
Capabilities: [c0] #e8 [f9d4]
Capabilities: [d8] #85 [2274]
Capabilities: [c0] #e8 [f9d4]
Capabilities: [d8] #85 [2274]
Capabilities: [c0] #e8 [f9d4]
Capabilities: [d8] #85 [2274]
C

Listing of /proc/cpuinfo:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.73GHz
stepping : 6
cpu MHz : 1734.122
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic sep mtrr pge mca
cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe tm2 est
bogomips : 3416.06

Listing of /proc/ioports and /proc/iomem:
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
03c0-03df : vga+
03f6-03f6 : ide0
c000-efff : PCI Bus #4d

00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000d0000-000d0fff : Adapter ROM
000d1000-000d2fff : Adapter ROM
000f0000-000fffff : System ROM
00100000-1f7cffff : System RAM
00100000-0023de35 : Kernel code
0023de36-0028a3ff : Kernel data
1f7d0000-1f7efbff : reserved
1f7efc00-1f7fafff : ACPI Non-volatile Storage
1f7fb000-1f7fffff : reserved
40800000-8b6fffff : PCI Bus #28
e0000000-efffffff : reserved
fec00000-fec01fff : reserved
fed20000-fed9afff : reserved
feda0000-fedbffff : reserved
ffb00000-ffbfffff : reserved
fff00000-ffffffff : reserved

I don't have /proc/scsi/scsi on my system, nor /proc/modules

Thank you,
John
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Roger Luethi: "Re: [proc.txt] Fix /proc/pid/statm documentation"
Previous message: Thomas Richter: "Re: [PATCH] NetMOS 9805 ParPort interface"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]