Re: 2.6.7-ck1

[Brian S. Stephan]

Con Kolivas wrote:

> Patchset update. The focus of this patchset is on system responsiveness
> with emphasis on desktops, but the scope of scheduler changes now makes
> this patch suitable to servers as well.
> 
> http://kernel.kolivas.org

Dear Con,
I've been having odd problems with a USB device using your patchset (or
specifically, staircase). I applied the staircase7.1 patch as well. On
boot, an already plugged in device is not identified:

usb 2-2: new low speed USB device using address 3
usbhid: probe of 2-2:1.0 failed with error -5

Furthermore, a USB mouse is also on the bus, but it is identified fine.
Reinserting the other device still doesn't work:

usb 2-2: new low speed USB device using address 3
usbhid: probe of 2-2:1.0 failed with error -5
Adding 377516k swap on /dev/sda2.  Priority:-1 extents:1
XFS mounting filesystem hda1
Ending clean XFS mount for filesystem: hda1
usb 2-2: USB disconnect, address 3
usb 2-2: new low speed USB device using address 4
usbhid: probe of 2-2:1.0 failed with error -5

Everything works fine in 2.6.7:

usb 2-2: new low speed USB device using address 3
drivers/usb/input/hid-core.c: ctrl urb status -32 received
input: USB HID v1.00 Joystick [6666:0667] on usb-0000:00:10.0-2

At first I thought this was just a strict staircase problem, but I then
enabled usbfs and the joystick is attached fine with -ck1, so maybe it's
just a subtle timing issue?

Thought I would make the report and see if it uncovered anything, -ck runs
great. :)

Brian

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/