Memory stick usb and 2.6.7-rc3 (works with 2.6.7-rc2)
From: Gregoire Favre
Date: Sat Jun 12 2004 - 06:44:47 EST
Hello,
I have already written to this list about my problem introduced with the
2.6.7-rc3 kernel.
When I plug my memory stick, I got this :
Jun 12 13:26:25 greg kernel: usb 1-2: new high speed USB device using address 3
Jun 12 13:26:25 greg kernel: scsi3 : SCSI emulation for USB Mass Storage devices
Jun 12 13:26:25 greg kernel: Vendor: USB Model: Flash Drive Rev: 1.12
Jun 12 13:26:25 greg kernel: Type: Direct-Access ANSI SCSI revision: 02
Jun 12 13:26:25 greg kernel: SCSI device sdg: 1015805 512-byte hdwr sectors (520 MB)
Jun 12 13:26:25 greg kernel: sdg: assuming Write Enabled
Jun 12 13:26:25 greg kernel: sdg: assuming drive cache: write through
Jun 12 13:26:25 greg kernel: sdg: unknown partition table
Jun 12 13:26:25 greg kernel: Attached scsi removable disk sdg at scsi3, channel 0, id 0, lun 0
Jun 12 13:26:25 greg kernel: Attached scsi generic sg9 at scsi3, channel 0, id 0, lun 0, type 0
Jun 12 13:26:26 greg scsi.agent[3639]: disk at /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/host3/3:0:0:0
My other USB mass storage device (a 8-1 cards reader) works just fine with
this 2.6.7-rc3 kernel.
The partition as shown in fdisk on this kernel is :
Disk /dev/sdg: 520 MB, 520092160 bytes
16 heads, 62 sectors/track, 1023 cylinders
Units = cylinders of 992 * 512 = 507904 bytes
Device Boot Start End Blocks Id System
/dev/sdg1 ? 784412 1935127 570754815+ 72 Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(357, 116, 40) logical=(784411, 3, 11)
Partition 1 has different physical/logical endings:
phys=(357, 32, 45) logical=(1935126, 8, 51)
Partition 1 does not end on cylinder boundary.
/dev/sdg2 ? 170050 2121692 968014120 65 Novell Netware 386
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(288, 115, 43) logical=(170049, 14, 47)
Partition 2 has different physical/logical endings:
phys=(367, 114, 50) logical=(2121691, 4, 42)
Partition 2 does not end on cylinder boundary.
/dev/sdg3 ? 1884962 3836603 968014096 79 Unknown
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(366, 32, 33) logical=(1884961, 2, 30)
Partition 3 has different physical/logical endings:
phys=(357, 32, 43) logical=(3836602, 7, 39)
Partition 3 does not end on cylinder boundary.
/dev/sdg4 ? 1 3666559 1818613248 d Unknown
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(372, 97, 50) logical=(0, 0, 1)
Partition 4 has different physical/logical endings:
phys=(0, 10, 0) logical=(3666558, 15, 30)
Partition 4 does not end on cylinder boundary.
Partition table entries are not in disk order
If I reboot with 2.6.7-rc2 (and remove the Memory Stick, otherwise I don't
have my device in same order, I haven't found out how to solve this issue)
I got the following in putting the Memory Stick in :
Jun 12 13:40:01 greg kernel: usb 1-2: new high speed USB device using address 3
Jun 12 13:40:01 greg kernel: scsi3 : SCSI emulation for USB Mass Storage devices
Jun 12 13:40:01 greg kernel: Vendor: USB Model: Flash Drive Rev: 1.12
Jun 12 13:40:01 greg kernel: Type: Direct-Access ANSI SCSI revision: 02
Jun 12 13:40:01 greg kernel: SCSI device sdg: 1015805 512-byte hdwr sectors (520 MB)
Jun 12 13:40:01 greg kernel: sdg: assuming Write Enabled
Jun 12 13:40:01 greg kernel: sdg: assuming drive cache: write through
Jun 12 13:40:01 greg kernel: sdg: sdg1 sdg2 sdg3 sdg4
Jun 12 13:40:01 greg kernel: Attached scsi removable disk sdg at scsi3, channel 0, id 0, lun 0
Jun 12 13:40:01 greg kernel: Attached scsi generic sg9 at scsi3, channel 0, id 0, lun 0, type 0
Jun 12 13:40:02 greg scsi.agent[4073]: disk at /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/host3/3:0:0:0
NOTICE the partition is recognized...
And fdisk tells me :
Disk /dev/sdg: 520 MB, 520092160 bytes
16 heads, 62 sectors/track, 1023 cylinders
Units = cylinders of 992 * 512 = 507904 bytes
Device Boot Start End Blocks Id System
/dev/sdg1 ? 784412 1935127 570754815+ 72 Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(357, 116, 40) logical=(784411, 3, 11)
Partition 1 has different physical/logical endings:
phys=(357, 32, 45) logical=(1935126, 8, 51)
Partition 1 does not end on cylinder boundary.
/dev/sdg2 ? 170050 2121692 968014120 65 Novell Netware 386
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(288, 115, 43) logical=(170049, 14, 47)
Partition 2 has different physical/logical endings:
phys=(367, 114, 50) logical=(2121691, 4, 42)
Partition 2 does not end on cylinder boundary.
/dev/sdg3 ? 1884962 3836603 968014096 79 Unknown
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(366, 32, 33) logical=(1884961, 2, 30)
Partition 3 has different physical/logical endings:
phys=(357, 32, 43) logical=(3836602, 7, 39)
Partition 3 does not end on cylinder boundary.
/dev/sdg4 ? 1 3666559 1818613248 d Unknown
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(372, 97, 50) logical=(0, 0, 1)
Partition 4 has different physical/logical endings:
phys=(0, 10, 0) logical=(3666558, 15, 30)
Partition 4 does not end on cylinder boundary.
Partition table entries are not in disk order
And I can mount it and use it perfectly ;-)
Any idea what's wrong with 2.6.7-rc3 ?
Thank you very much and have a great day !!!
PLEASE: CC to me as I only read this list though NNTP :-)
--
Grégoire Favre
__________________________________________________________________________
http://algebra.epfl.ch/greg ICQ:16624071 mailto:Gregoire.Favre@xxxxxxxxxxx
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/