Re: [PATCH] Re: SERIO_USERDEV patch for 2.6

From: Vojtech Pavlik
Date: Thu Jun 03 2004 - 16:23:22 EST


On Thu, Jun 03, 2004 at 01:21:21PM +0300, Tuukka Toivonen wrote:
> New version released which addresses the issues you mentioned:
> wget \
> http://www.ee.oulu.fi/~tuukkat/tmp/linux-2.6.6-userdev.20040603.patch
>
> >On Sun, 30 May 2004, Vojtech Pavlik wrote:
> >>Coexisting would mean that when someone wants to open the raw device,
> >>the serio layer would disconnect the psmouse driver, and give control to
> >>the raw device instead. I believe that could work.
>
> Done, with slight modification: if the device is opened in read-only mode,
> the kernel drivers are not disconnected. This way the serio port could be
> controlled via IOCTL even when assigned to kernel drivers, if it ever
> becomes useful. Useful also for debugging etc.
>
> >>I'd like to keep it separate from the
> >>serio.c file, although it's obvious it'll require to be linked to it
> >>statically, because it needs hooks there
>
> Done. It's now in serio-dev.c. I also added serio-dev.h, which
> unfortunately is slightly messy so that I was able to inline some
> functions. It would be trivial to clean it up, if I wouldn't inline
> those functions.
>
> I also had to rename serio.c into serio-core.c, which makes the actual
> changes into the file unobvious from the patch above. I made a separate
> diff about that, shown below (just for easy comparison).
>
> The last change I made converts slashes '/' into underscores '_' (so
> eg. isa0060/serio0 is changed to isa0060_serio0 in /proc/misc, /dev
> with devfs, and /sys) because Sau Dan Lee reported that slashes don't work
> well with sysfs.
>
> I tested the patch in a couple of machines, especially the new features.
> Seems to work finely.

I like it. Give me a while to evaluate your and Dmitry's approach in
relation to future ...

--
Vojtech Pavlik
SuSE Labs, SuSE CR
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/