Re: ACPI S3 fails to re-init NIC on Asus A7V

[Arjan van de Ven]

On Thu, May 27, 2004 at 10:14:50PM +0200, Carsten Aulbert wrote:
> Hi all,
> 
> Please consider the following problem:
> 
> Home Server (daisy):
> 
> Asus A7V board
> Duron 650 MHz
> Debian sarge (not 100% up2date right now - from March 22nd)
> SiS900 (also tried 3Com 3c509-TX-M without a change)
> 
> Kernels tried:
> 2.4.22 (IIRC), 2.6.4, 2.6.4 with acpi-patch 20040311, 2.6.6
> 
> Suspending to S3 works fine, resume also (except with the 
> onboard-Promise chip, but that's not a big issue), however, trying to 
> use the network after resume gives
> NETDEV WATCHDOG: eth0: transmit timed out



please try this patch:


diff -urNp linux-1100/drivers/pci/pci.c linux-1110/drivers/pci/pci.c
--- linux-1100/drivers/pci/pci.c
+++ linux-1110/drivers/pci/pci.c
@@ -385,6 +385,7 @@ pci_enable_device_bars(struct pci_dev *d
 int
 pci_enable_device(struct pci_dev *dev)
 {
+	dev->is_enabled = 1;
 	return pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1);
 }
 
@@ -399,6 +400,9 @@ void
 pci_disable_device(struct pci_dev *dev)
 {
 	u16 pci_command;
+	
+	dev->is_enabled = 0;
+	dev->is_busmaster = 0;
 
 	pci_read_config_word(dev, PCI_COMMAND, &pci_command);
 	if (pci_command & PCI_COMMAND_MASTER) {
@@ -601,6 +605,7 @@ pci_set_master(struct pci_dev *dev)
 		cmd |= PCI_COMMAND_MASTER;
 		pci_write_config_word(dev, PCI_COMMAND, cmd);
 	}
+	dev->is_busmaster = 1;
 	pcibios_set_master(dev);
 }
 
diff -urNp linux-1100/drivers/pci/pci-driver.c linux-1110/drivers/pci/pci-driver.c
--- linux-1100/drivers/pci/pci-driver.c
+++ linux-1110/drivers/pci/pci-driver.c
@@ -299,10 +299,30 @@ static int pci_device_suspend(struct dev
 {
 	struct pci_dev * pci_dev = to_pci_dev(dev);
 	struct pci_driver * drv = pci_dev->driver;
+	int i = 0;
 
 	if (drv && drv->suspend)
-		return drv->suspend(pci_dev,state);
-	return 0;
+		i = drv->suspend(pci_dev,state);
+		
+	pci_save_state(pci_dev, pci_dev->saved_config_space);
+	return i;
+}
+
+
+/* 
+ * Default resume method for devices that have no driver provided resume,
+ * or not even a driver at all.
+ */
+static void pci_default_resume(struct pci_dev *pci_dev)
+{
+	/* restore the PCI config space */
+	pci_restore_state(pci_dev, pci_dev->saved_config_space);
+	/* if the device was enabled before suspend, reenable */
+	if (pci_dev->is_enabled)
+		pci_enable_device(pci_dev);
+	/* if the device was busmaster before the suspend, make it busmaster again */
+	if (pci_dev->is_busmaster)
+		pci_set_master(pci_dev);
 }
 
 static int pci_device_resume(struct device * dev)
@@ -312,6 +332,8 @@ static int pci_device_resume(struct devi
 
 	if (drv && drv->resume)
 		drv->resume(pci_dev);
+	else
+		pci_default_resume(pci_dev);
 	return 0;
 }
 
diff -urNp linux-1100/include/linux/pci.h linux-1110/include/linux/pci.h
--- linux-1100/include/linux/pci.h
+++ linux-1110/include/linux/pci.h
@@ -488,6 +488,11 @@ struct pci_dev {
 	/* These fields are used by common fixups */
 	unsigned int	transparent:1;	/* Transparent PCI bridge */
 	unsigned int	multifunction:1;/* Part of multi-function device */
+	/* keep track of device state */
+	unsigned int	is_enabled:1;	/* pci_enable_device has been called */
+	unsigned int	is_busmaster:1; /* device is busmaster */
+	
+	unsigned int 	saved_config_space[16]; /* config space saved at suspend time */
 #ifdef CONFIG_PCI_NAMES
 #define PCI_NAME_SIZE	96
 #define PCI_NAME_HALF	__stringify(43)	/* less than half to handle slop */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/