[PATCH] remove dead PC9800 IDE support

From: Bartlomiej Zolnierkiewicz
Date: Mon May 03 2004 - 18:40:41 EST


It was added in 2.5.66 but PC9800 subarch is still non-buildable.
Also this is one big hack and only half-merged.

linux-2.6.6-rc3-bk2-bzolnier/drivers/ide/Makefile | 1
linux-2.6.6-rc3-bk2-bzolnier/drivers/ide/ide-proc.c | 1
linux-2.6.6-rc3-bk2-bzolnier/include/asm-i386/ide.h | 34 --------
linux-2.6.6-rc3-bk2-bzolnier/include/linux/ide.h | 5 -
linux-2.6.6-rc3-bk2/drivers/ide/legacy/pc9800.c | 84 --------------------
5 files changed, 2 insertions(+), 123 deletions(-)

diff -puN drivers/ide/ide-proc.c~ide_pc9800 drivers/ide/ide-proc.c
--- linux-2.6.6-rc3-bk2/drivers/ide/ide-proc.c~ide_pc9800 2004-05-04 01:32:52.138359128 +0200
+++ linux-2.6.6-rc3-bk2-bzolnier/drivers/ide/ide-proc.c 2004-05-04 01:32:52.161355632 +0200
@@ -352,7 +352,6 @@ static int proc_ide_read_imodel
case ide_cy82c693: name = "cy82c693"; break;
case ide_4drives: name = "4drives"; break;
case ide_pmac: name = "mac-io"; break;
- case ide_pc9800: name = "pc9800"; break;
default: name = "(unknown)"; break;
}
len = sprintf(page, "%s\n", name);
diff -puN -L drivers/ide/legacy/pc9800.c drivers/ide/legacy/pc9800.c~ide_pc9800 /dev/null
--- linux-2.6.6-rc3-bk2/drivers/ide/legacy/pc9800.c
+++ /dev/null 2004-01-17 00:25:55.000000000 +0100
@@ -1,84 +0,0 @@
-/*
- * ide_pc9800.c
- *
- * Copyright (C) 1997-2000 Linux/98 project,
- * Kyoto University Microcomputer Club.
- */
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pc9800.h>
-
-#define PC9800_IDE_BANKSELECT 0x432
-
-#undef PC9800_IDE_DEBUG
-
-static void pc9800_select(ide_drive_t *drive)
-{
-#ifdef PC9800_IDE_DEBUG
- byte old;
-
- /* Too noisy: */
- /* printk(KERN_DEBUG "pc9800_select(%s)\n", drive->name); */
-
- outb(0x80, PC9800_IDE_BANKSELECT);
- old = inb(PC9800_IDE_BANKSELECT);
- if (old != HWIF(drive)->index)
- printk(KERN_DEBUG "ide-pc9800: switching bank #%d -> #%d\n",
- old, HWIF(drive)->index);
-#endif
- outb(HWIF(drive)->index, PC9800_IDE_BANKSELECT);
-}
-
-void __init ide_probe_for_pc9800(void)
-{
- u8 saved_bank;
-
- if (!PC9800_9821_P() /* || !PC9821_IDEIF_DOUBLE_P() */)
- return;
-
- if (!request_region(PC9800_IDE_BANKSELECT, 1, "ide0/1 bank")) {
- printk(KERN_ERR
- "ide: bank select port (%#x) is already occupied!\n",
- PC9800_IDE_BANKSELECT);
- return;
- }
-
- /* Do actual probing. */
- if ((saved_bank = inb(PC9800_IDE_BANKSELECT)) == (u8) ~0
- || (outb(saved_bank ^ 1, PC9800_IDE_BANKSELECT),
- /* Next outb is dummy for reading status. */
- outb(0x80, PC9800_IDE_BANKSELECT),
- inb(PC9800_IDE_BANKSELECT) != (saved_bank ^ 1))) {
- printk(KERN_INFO
- "ide: pc9800 type bank selecting port not found\n");
- release_region(PC9800_IDE_BANKSELECT, 1);
- return;
- }
-
- /* Restore original value, just in case. */
- outb(saved_bank, PC9800_IDE_BANKSELECT);
-
- /* These ports are reseved by IDE I/F. */
- if (!request_region(0x430, 1, "ide") ||
- !request_region(0x435, 1, "ide")) {
- printk(KERN_WARNING
- "ide: IO port 0x430 and 0x435 are reserved for IDE"
- " the card using these ports may not work\n");
- }
-
- if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET] == HD_DATA &&
- ide_hwifs[1].io_ports[IDE_DATA_OFFSET] == HD_DATA) {
- ide_hwifs[0].chipset = ide_pc9800;
- ide_hwifs[0].mate = &ide_hwifs[1];
- ide_hwifs[0].selectproc = pc9800_select;
- ide_hwifs[1].chipset = ide_pc9800;
- ide_hwifs[1].mate = &ide_hwifs[0];
- ide_hwifs[1].selectproc = pc9800_select;
- }
-}
diff -puN drivers/ide/Makefile~ide_pc9800 drivers/ide/Makefile
--- linux-2.6.6-rc3-bk2/drivers/ide/Makefile~ide_pc9800 2004-05-04 01:32:52.148357608 +0200
+++ linux-2.6.6-rc3-bk2-bzolnier/drivers/ide/Makefile 2004-05-04 01:32:52.162355480 +0200
@@ -26,7 +26,6 @@ ide-core-$(CONFIG_PROC_FS) += ide-proc.
ide-core-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o

# built-in only drivers from legacy/
-ide-core-$(CONFIG_BLK_DEV_IDE_PC9800) += legacy/pc9800.o
ide-core-$(CONFIG_BLK_DEV_BUDDHA) += legacy/buddha.o
ide-core-$(CONFIG_BLK_DEV_FALCON_IDE) += legacy/falconide.o
ide-core-$(CONFIG_BLK_DEV_GAYLE) += legacy/gayle.o
diff -puN include/asm-i386/ide.h~ide_pc9800 include/asm-i386/ide.h
--- linux-2.6.6-rc3-bk2/include/asm-i386/ide.h~ide_pc9800 2004-05-04 01:32:52.152357000 +0200
+++ linux-2.6.6-rc3-bk2-bzolnier/include/asm-i386/ide.h 2004-05-04 01:32:52.164355176 +0200
@@ -26,9 +26,6 @@
static __inline__ int ide_default_irq(unsigned long base)
{
switch (base) {
-#ifdef CONFIG_X86_PC9800
- case 0x640: return 9;
-#endif
case 0x1f0: return 14;
case 0x170: return 15;
case 0x1e8: return 11;
@@ -43,48 +40,17 @@ static __inline__ int ide_default_irq(un
static __inline__ unsigned long ide_default_io_base(int index)
{
switch (index) {
-#ifdef CONFIG_X86_PC9800
- case 0:
- case 1: return 0x640;
-#else
case 0: return 0x1f0;
case 1: return 0x170;
case 2: return 0x1e8;
case 3: return 0x168;
case 4: return 0x1e0;
case 5: return 0x160;
-#endif
default:
return 0;
}
}

-#ifdef CONFIG_X86_PC9800
-static __inline__ void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
- unsigned long ctrl_port, int *irq)
-{
- unsigned long reg = data_port;
- int i;
-
- unsigned long increment = data_port == 0x640 ? 2 : 1;
-
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
- hw->io_ports[i] = reg;
- reg += increment;
- }
- if (ctrl_port) {
- hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
- } else if (data_port == 0x640) {
- hw->io_ports[IDE_CONTROL_OFFSET] = 0x74c;
- } else {
- hw->io_ports[IDE_CONTROL_OFFSET] = hw->io_ports[IDE_DATA_OFFSET] + 0x206;
- }
- if (irq != NULL)
- *irq = 0;
- hw->io_ports[IDE_IRQ_OFFSET] = 0;
-}
-#endif
-
#ifdef CONFIG_BLK_DEV_IDEPCI
#define ide_init_default_irq(base) (0)
#else
diff -puN include/linux/ide.h~ide_pc9800 include/linux/ide.h
--- linux-2.6.6-rc3-bk2/include/linux/ide.h~ide_pc9800 2004-05-04 01:32:52.156356392 +0200
+++ linux-2.6.6-rc3-bk2-bzolnier/include/linux/ide.h 2004-05-04 01:32:52.166354872 +0200
@@ -255,7 +255,7 @@ typedef enum { ide_unknown, ide_generic,
ide_pdc4030, ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
ide_pmac, ide_etrax100, ide_acorn,
- ide_pc9800, ide_forced
+ ide_forced
} hwif_chipset_t;

/*
@@ -308,8 +308,7 @@ static inline void ide_std_init_ports(hw
/*
* ide_init_hwif_ports() is OBSOLETE and will be removed in 2.7 series.
*
- * arm26, arm, h8300, m68k, m68knommu (broken) and i386-pc9800 (broken)
- * still have their own versions.
+ * arm{26}, h8300, m68k and m68knommu (broken) still have their own versions.
*/
#if !defined(CONFIG_ARM) && !defined(CONFIG_H8300) && !defined(CONFIG_M68K)
static inline void ide_init_hwif_ports(hw_regs_t *hw,

_

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/