Re: 8139too not working in 2.6
From: Mirko Caserta
Date: Mon Apr 26 2004 - 09:48:23 EST
On Mon, 26 Apr 2004 21:58:05 +0900, OGAWA Hirofumi
<hirofumi@xxxxxxxxxxxxxxxxxx> wrote:
"Mirko Caserta" <mirko@xxxxxxxxxxxx> writes:
eth0: Transmit timeout, status 0c 0005 c07f media 10.
This problem looks like miss configuration of level/edge-triggerd, or
IRQ-routing problem.
The attached script may clarify the problem. Also "lspci -vvvxxx" and
output of dmesg would be useful.
I have attached a tarball with output from dmesg, lspci -vvvxxx, cat
/proc/interrupts and your dump_pirq.pl utility.
Please note that before booting the 2.6.6-rc2-mm2 kernel I got into the
BIOS and disabled "Assign IRQ for USB" which is why lspci and dmesg show
irq 0 assigned to the USB chips.
Besides that change in the BIOS, everything is just the same between the
reboots, apart from the card not properly working in 2.6.6-rc2-mm2 :/
Anyway, it doesn't look like an irq problem to me. It looks more like a
wrong detection of the TX triggering level in the driver.
Thanks again, Mirko.
Attachment:
carbon-kernel-debug.tar.bz2
Description: application/bzip2