Re: Sensors (W83627HF) in Tyan S2882

From: Fabian Fenaut
Date: Mon Apr 19 2004 - 08:43:23 EST

Jan Kasprzak a écrit le 19.04.2004 14:01:

I have two systems with Tyan S2882 boards (K8S Pro). The sensors chip is
Winbond w83627hf according to the mainboard documentation. The w83627hf driver can read values from the sensors, but apparently not all values. The
board has six fan connectors (two labeled CPU1 fan and CPU2 fan, and four
chassis fans). BIOS displays the fan status correctly for all fans, so all
fans are connected to the sensors chip. However, there are only three fans
listed in /sys/devices/platform/i2c-1/1-0290.

Probably unrelated to your problem, but isn't there a typo in drivers/i2c/chips/Kconfig ? maybe patch below ?


diff -Nru drivers/i2c/chips/Kconfig.orig drivers/i2c/chips/Kconfig
--- drivers/i2c/chips/Kconfig.orig Fri Apr 16 11:12:17 2004
+++ drivers/i2c/chips/Kconfig Mon Apr 19 15:23:48 2004
@@ -158,7 +158,7 @@
will be called via686a.

config SENSORS_W83781D
- tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
+ tristate "Winbond W83781D, W83782D, W83783S, W83682HF, Asus AS99127F"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at
Please read the FAQ at