PATCH] Kconfig.debug family
From: Randy.Dunlap
Date: Thu Apr 15 2004 - 16:03:04 EST
On Wed, 14 Apr 2004 16:25:39 -0500 Matt Mackall wrote:
| Sticking this in arch/*/Kconfig seems silly (as does much of the
| duplication in said files). Can we stick this and other debug bits
| under the kallsyms option in init/Kconfig instead? Or alternately move
| debugging bits into their own file that gets included as appropriate.
This patch:
- creates lib/Kconfig.debug for generic kernel debug options
- creates arch/*/Kconfig.debug for arch-specific debug options
- moves KALLSYMS to the generic kernel debug options list
This is a first cut for review/comments. I will double-check
the generic options list to see how it needs to be corrected...
Applies to 2.6.6-rc1.
All arches have been tested by using 'make ARCH=foo {menu|x}config'.
However, ARCH=cris fails due to a missing file:
source "arch/cris/drivers/Kconfig".
--
~Randy
arch/alpha/Kconfig.debug | 54 ++++++++++++++
arch/arm/Kconfig | 159 -------------------------------------------
arch/arm/Kconfig.debug | 113 ++++++++++++++++++++++++++++++
arch/arm26/Kconfig.debug | 58 +++++++++++++++
arch/cris/Kconfig.debug | 15 ++++
arch/h8300/Kconfig | 71 -------------------
arch/h8300/Kconfig.debug | 67 ++++++++++++++++++
arch/i386/Kconfig | 124 ---------------------------------
arch/i386/Kconfig.debug | 15 ++++
arch/ia64/Kconfig | 113 ------------------------------
arch/ia64/Kconfig.debug | 63 +++++++++++++++++
arch/m68k/Kconfig.debug | 9 ++
arch/m68knommu/Kconfig | 54 --------------
arch/m68knommu/Kconfig.debug | 42 +++++++++++
arch/mips/Kconfig.debug | 67 ++++++++++++++++++
arch/parisc/Kconfig.debug | 5 +
arch/ppc/Kconfig.debug | 72 +++++++++++++++++++
arch/ppc64/Kconfig | 79 ---------------------
arch/ppc64/Kconfig.debug | 27 +++++++
arch/s390/Kconfig.debug | 5 +
arch/sh/Kconfig.debug | 111 ++++++++++++++++++++++++++++++
arch/sparc/Kconfig.debug | 13 +++
arch/sparc64/Kconfig.debug | 38 ++++++++++
arch/um/Kconfig | 59 ---------------
arch/um/Kconfig.debug | 35 +++++++++
arch/v850/Kconfig.debug | 10 ++
arch/x86_64/Kconfig | 100 ---------------------------
arch/x86_64/Kconfig.debug | 47 ++++++++++++
init/Kconfig | 8 --
lib/Kconfig.debug | 151 ++++++++++++++++++++++++++++++++++++++++
30 files changed, 1033 insertions(+), 751 deletions(-)
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/alpha/Kconfig.debug linux-266-rc1-kdebug/arch/alpha/Kconfig.debug
--- linux-266-rc1-pv/arch/alpha/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/alpha/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,54 @@
+
+menu "Alpha kernel hacking"
+
+config ALPHA_LEGACY_START_ADDRESS
+ bool "Legacy kernel start address"
+ depends on ALPHA_GENERIC
+ default n
+ ---help---
+ The 2.4 kernel changed the kernel start address from 0x310000
+ to 0x810000 to make room for the Wildfire's larger SRM console.
+ Recent consoles on Titan and Marvel machines also require the
+ extra room.
+
+ If you're using aboot 0.7 or later, the bootloader will examine the
+ ELF headers to determine where to transfer control. Unfortunately,
+ most older bootloaders -- APB or MILO -- hardcoded the kernel start
+ address rather than examining the ELF headers, and the result is a
+ hard lockup.
+
+ Say Y if you have a broken bootloader. Say N if you do not, or if
+ you wish to run on Wildfire, Titan, or Marvel.
+
+config ALPHA_LEGACY_START_ADDRESS
+ bool
+ depends on !ALPHA_GENERIC && !ALPHA_TITAN && !ALPHA_MARVEL && !ALPHA_WILDFIRE
+ default y
+
+config MATHEMU
+ tristate "Kernel FP software completion" if DEBUG_KERNEL
+ default y if !DEBUG_KERNEL
+ help
+ This option is required for IEEE compliant floating point arithmetic
+ on the Alpha. The only time you would ever not say Y is to say M in
+ order to debug the code. Say Y unless you know what you are doing.
+
+config DEBUG_RWLOCK
+ bool "Read-write spinlock debugging"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here then read-write lock processing will count how many
+ times it has tried to get the lock and issue an error message after
+ too many attempts. If you suspect a rwlock problem or a kernel
+ hacker asks for this option then say Y. Otherwise say N.
+
+config DEBUG_SEMAPHORE
+ bool "Semaphore debugging"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here then semaphore processing will issue lots of
+ verbose debugging messages. If you suspect a semaphore problem or a
+ kernel hacker asks for this option then say Y. Otherwise say N.
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/arm/Kconfig linux-266-rc1-kdebug/arch/arm/Kconfig
--- linux-266-rc1-pv/arch/arm/Kconfig 2004-04-15 14:00:10.000000000 -0700
+++ linux-266-rc1-kdebug/arch/arm/Kconfig 2004-04-15 14:00:56.000000000 -0700
@@ -621,164 +621,9 @@ source "drivers/misc/Kconfig"
source "drivers/usb/Kconfig"
-
menu "Kernel hacking"
-
-# RMK wants arm kernels compiled with frame pointers so hardwire this to y.
-# If you know what you are doing and are willing to live without stack
-# traces, you can get a slightly smaller kernel by setting this option to
-# n, but then RMK will have to kill you ;).
-config FRAME_POINTER
- bool
- default y
- help
- If you say N here, the resulting kernel will be slightly smaller and
- faster. However, when a problem occurs with the kernel, the
- information that is reported is severely limited. Most people
- should say Y here.
-
-config DEBUG_USER
- bool "Verbose user fault messages"
- help
- When a user program crashes due to an exception, the kernel can
- print a brief message explaining what the problem was. This is
- sometimes helpful for debugging but serves no purpose on a
- production system. Most people should say N here.
-
- In addition, you need to pass user_debug=N on the kernel command
- line to enable this feature. N consists of the sum of:
-
- 1 - undefined instruction events
- 2 - system calls
- 4 - invalid data aborts
- 8 - SIGSEGV faults
- 16 - SIGBUS faults
-
-config DEBUG_INFO
- bool "Include GDB debugging information in kernel binary"
- help
- Say Y here to include source-level debugging information in the
- `vmlinux' binary image. This is handy if you want to use gdb or
- addr2line to debug the kernel. It has no impact on the in-memory
- footprint of the running kernel but it can increase the amount of
- time and disk space needed for compilation of the kernel. If in
- doubt say N.
-
-config DEBUG_KERNEL
- bool "Kernel debugging"
- help
- Say Y here if you are developing drivers or trying to debug and
- identify kernel problems.
-
-config DEBUG_SLAB
- bool "Debug memory allocations"
- depends on DEBUG_KERNEL
- help
- Say Y here to have the kernel do limited verification on memory
- allocation as well as poisoning memory on free to catch use of freed
- memory.
-
-config MAGIC_SYSRQ
- bool "Magic SysRq key"
- depends on DEBUG_KERNEL
- help
- If you say Y here, you will have some control over the system even
- if the system crashes for example during kernel debugging (e.g., you
- will be able to flush the buffer cache to disk, reboot the system
- immediately or dump some status information). This is accomplished
- by pressing various keys while holding SysRq (Alt+PrintScreen). It
- also works on a serial console (on PC hardware at least), if you
- send a BREAK and then within 5 seconds a command keypress. The
- keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
- unless you really know what this hack does.
-
-config DEBUG_SPINLOCK
- bool "Spinlock debugging"
- depends on DEBUG_KERNEL
- help
- Say Y here and build SMP to catch missing spinlock initialization
- and certain other kinds of spinlock errors commonly made. This is
- best used in conjunction with the NMI watchdog so that spinlock
- deadlocks are also debuggable.
-
-config DEBUG_WAITQ
- bool "Wait queue debugging"
- depends on DEBUG_KERNEL
-
-config DEBUG_BUGVERBOSE
- bool "Verbose BUG() reporting (adds 70K)"
- depends on DEBUG_KERNEL
- help
- Say Y here to make BUG() panics output the file name and line number
- of the BUG call as well as the EIP and oops trace. This aids
- debugging but costs about 70-100K of memory.
-
-config DEBUG_ERRORS
- bool "Verbose kernel error messages"
- depends on DEBUG_KERNEL
- help
- This option controls verbose debugging information which can be
- printed when the kernel detects an internal error. This debugging
- information is useful to kernel hackers when tracking down problems,
- but mostly meaningless to other people. It's safe to say Y unless
- you are concerned with the code size or don't want to see these
- messages.
-
-# These options are only for real kernel hackers who want to get their hands dirty.
-config DEBUG_LL
- bool "Kernel low-level debugging functions"
- depends on DEBUG_KERNEL
- help
- Say Y here to include definitions of printascii, printchar, printhex
- in the kernel. This is helpful if you are debugging code that
- executes before the console is initialized.
-
-config DEBUG_ICEDCC
- bool "Kernel low-level debugging via EmbeddedICE DCC channel"
- depends on DEBUG_LL
- help
- Say Y here if you want the debug print routines to direct their
- output to the EmbeddedICE macrocell's DCC channel using
- co-processor 14. This is known to work on the ARM9 style ICE
- channel.
-
- It does include a timeout to ensure that the system does not
- totally freeze when there is nothing connected to read.
-
-config DEBUG_DC21285_PORT
- bool "Kernel low-level debugging messages via footbridge serial port"
- depends on DEBUG_LL && FOOTBRIDGE
- help
- Say Y here if you want the debug print routines to direct their
- output to the serial port in the DC21285 (Footbridge). Saying N
- will cause the debug messages to appear on the first 16550
- serial port.
-
-config DEBUG_CLPS711X_UART2
- bool "Kernel low-level debugging messages via UART2"
- depends on DEBUG_LL && ARCH_CLPS711X
- help
- Say Y here if you want the debug print routines to direct their
- output to the second serial port on these devices. Saying N will
- cause the debug messages to appear on the first serial port.
-
-config DEBUG_S3C2410_PORT
- depends on DEBUG_LL && ARCH_S3C2410
- bool "Kernel low-level debugging messages via S3C2410 UART"
- help
- Say Y here if you want debug print routines to go to one of the
- S3C2410 internal UARTs. The chosen UART must have been configured
- before it is used.
-
-config DEBUG_S3C2410_UART
- int
- depends on DEBUG_LL && ARCH_S3C2410
- default "0"
- help
- Choice for UART for kernel low-level using S3C2410 UARTS,
- should be between zero and two. The port must have been
- initalised by the boot-loader before use.
-
+source "lib/Kconfig.debug"
+source "arch/arm/Kconfig.debug"
endmenu
source "security/Kconfig"
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/arm/Kconfig.debug linux-266-rc1-kdebug/arch/arm/Kconfig.debug
--- linux-266-rc1-pv/arch/arm/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/arm/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,113 @@
+
+menu "ARM kernel hacking"
+
+# RMK wants arm kernels compiled with frame pointers so hardwire this to y.
+# If you know what you are doing and are willing to live without stack
+# traces, you can get a slightly smaller kernel by setting this option to
+# n, but then RMK will have to kill you ;).
+config FRAME_POINTER
+ bool
+ default y
+ help
+ If you say N here, the resulting kernel will be slightly smaller and
+ faster. However, when a problem occurs with the kernel, the
+ information that is reported is severely limited. Most people
+ should say Y here.
+
+config DEBUG_USER
+ bool "Verbose user fault messages"
+ help
+ When a user program crashes due to an exception, the kernel can
+ print a brief message explaining what the problem was. This is
+ sometimes helpful for debugging but serves no purpose on a
+ production system. Most people should say N here.
+
+ In addition, you need to pass user_debug=N on the kernel command
+ line to enable this feature. N consists of the sum of:
+
+ 1 - undefined instruction events
+ 2 - system calls
+ 4 - invalid data aborts
+ 8 - SIGSEGV faults
+ 16 - SIGBUS faults
+
+config DEBUG_WAITQ
+ bool "Wait queue debugging"
+ depends on DEBUG_KERNEL
+
+config DEBUG_BUGVERBOSE
+ bool "Verbose BUG() reporting (adds 70K)"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here to make BUG() panics output the file name and line number
+ of the BUG call as well as the EIP and oops trace. This aids
+ debugging but costs about 70-100K of memory.
+
+config DEBUG_ERRORS
+ bool "Verbose kernel error messages"
+ depends on DEBUG_KERNEL
+ help
+ This option controls verbose debugging information which can be
+ printed when the kernel detects an internal error. This debugging
+ information is useful to kernel hackers when tracking down problems,
+ but mostly meaningless to other people. It's safe to say Y unless
+ you are concerned with the code size or don't want to see these
+ messages.
+
+# These options are only for real kernel hackers who want to get their hands dirty.
+config DEBUG_LL
+ bool "Kernel low-level debugging functions"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here to include definitions of printascii, printchar, printhex
+ in the kernel. This is helpful if you are debugging code that
+ executes before the console is initialized.
+
+config DEBUG_ICEDCC
+ bool "Kernel low-level debugging via EmbeddedICE DCC channel"
+ depends on DEBUG_LL
+ help
+ Say Y here if you want the debug print routines to direct their
+ output to the EmbeddedICE macrocell's DCC channel using
+ co-processor 14. This is known to work on the ARM9 style ICE
+ channel.
+
+ It does include a timeout to ensure that the system does not
+ totally freeze when there is nothing connected to read.
+
+config DEBUG_DC21285_PORT
+ bool "Kernel low-level debugging messages via footbridge serial port"
+ depends on DEBUG_LL && FOOTBRIDGE
+ help
+ Say Y here if you want the debug print routines to direct their
+ output to the serial port in the DC21285 (Footbridge). Saying N
+ will cause the debug messages to appear on the first 16550
+ serial port.
+
+config DEBUG_CLPS711X_UART2
+ bool "Kernel low-level debugging messages via UART2"
+ depends on DEBUG_LL && ARCH_CLPS711X
+ help
+ Say Y here if you want the debug print routines to direct their
+ output to the second serial port on these devices. Saying N will
+ cause the debug messages to appear on the first serial port.
+
+config DEBUG_S3C2410_PORT
+ depends on DEBUG_LL && ARCH_S3C2410
+ bool "Kernel low-level debugging messages via S3C2410 UART"
+ help
+ Say Y here if you want debug print routines to go to one of the
+ S3C2410 internal UARTs. The chosen UART must have been configured
+ before it is used.
+
+config DEBUG_S3C2410_UART
+ int
+ depends on DEBUG_LL && ARCH_S3C2410
+ default "0"
+ help
+ Choice for UART for kernel low-level using S3C2410 UARTS,
+ should be between zero and two. The port must have been
+ initalised by the boot-loader before use.
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/arm26/Kconfig.debug linux-266-rc1-kdebug/arch/arm26/Kconfig.debug
--- linux-266-rc1-pv/arch/arm26/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/arm26/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,58 @@
+
+menu "ARM26 kernel hacking"
+
+# RMK wants arm kernels compiled with frame pointers so hardwire this to y.
+# If you know what you are doing and are willing to live without stack
+# traces, you can get a slightly smaller kernel by setting this option to
+# n, but then RMK will have to kill you ;).
+config FRAME_POINTER
+ bool
+ default y
+ help
+ If you say N here, the resulting kernel will be slightly smaller and
+ faster. However, when a problem occurs with the kernel, the
+ information that is reported is severely limited. Most people
+ should say Y here.
+
+config DEBUG_USER
+ bool "Verbose user fault messages"
+ help
+ When a user program crashes due to an exception, the kernel can
+ print a brief message explaining what the problem was. This is
+ sometimes helpful for debugging but serves no purpose on a
+ production system. Most people should say N here.
+
+config DEBUG_WAITQ
+ bool "Wait queue debugging"
+ depends on DEBUG_KERNEL
+
+config DEBUG_BUGVERBOSE
+ bool "Verbose BUG() reporting (adds 70K)"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here to make BUG() panics output the file name and line number
+ of the BUG call as well as the EIP and oops trace. This aids
+ debugging but costs about 70-100K of memory.
+
+config DEBUG_ERRORS
+ bool "Verbose kernel error messages"
+ depends on DEBUG_KERNEL
+ help
+ This option controls verbose debugging information which can be
+ printed when the kernel detects an internal error. This debugging
+ information is useful to kernel hackers when tracking down problems,
+ but mostly meaningless to other people. It's safe to say Y unless
+ you are concerned with the code size or don't want to see these
+ messages.
+
+# These options are only for real kernel hackers who want to get their hands dirty.
+config DEBUG_LL
+ bool "Kernel low-level debugging functions"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here to include definitions of printascii, printchar, printhex
+ in the kernel. This is helpful if you are debugging code that
+ executes before the console is initialized.
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/cris/Kconfig.debug linux-266-rc1-kdebug/arch/cris/Kconfig.debug
--- linux-266-rc1-pv/arch/cris/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/cris/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,15 @@
+
+menu "CRIS kernel hacking"
+
+#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
+
+config PROFILE
+ bool "Kernel profiling support"
+
+config PROFILE_SHIFT
+ int "Profile shift count"
+ depends on PROFILE
+ default "2"
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/h8300/Kconfig linux-266-rc1-kdebug/arch/h8300/Kconfig
--- linux-266-rc1-pv/arch/h8300/Kconfig 2004-04-15 14:00:10.000000000 -0700
+++ linux-266-rc1-kdebug/arch/h8300/Kconfig 2004-04-15 14:00:56.000000000 -0700
@@ -297,75 +297,8 @@ endmenu
source "fs/Kconfig"
menu "Kernel hacking"
-
-config FULLDEBUG
- bool "Full Symbolic/Source Debugging support"
- help
- Enable debugging symbols on kernel build.
-
-config MAGIC_SYSRQ
- bool "Magic SysRq key"
- help
- Enables console device to interprent special characters as
- commands to dump state information.
-
-config HIGHPROFILE
- bool "Use fast second timer for profiling"
- help
- Use a fast secondary clock to produce profiling information.
-
-config NO_KERNEL_MSG
- bool "Suppress Kernel BUG Messages"
- help
- Do not output any debug BUG messages within the kernel.
-
-config GDB_MAGICPRINT
- bool "Message Output for GDB MagicPrint service"
- depends on (H8300H_SIM || H8S_SIM)
- help
- kernel messages output useing MagicPrint service from GDB
-
-config SYSCALL_PRINT
- bool "SystemCall trace print"
- help
- outout history of systemcall
-
-config GDB_DEBUG
- bool "Use gdb stub"
- depends on (!H8300H_SIM && !H8S_SIM)
- help
- gdb stub exception support
-
-config CONFIG_SH_STANDARD_BIOS
- bool "Use gdb protocol serial console"
- depends on (!H8300H_SIM && H8S_SIM)
- help
- serial console output using GDB protocol.
- Require eCos/RedBoot
-
-config DEFAULT_CMDLINE
- bool "Use buildin commandline"
- default n
- help
- buildin kernel commandline enabled.
-
-config KERNEL_COMMAND
- string "Buildin commmand string"
- depends on DEFAULT_CMDLINE
- help
- buildin kernel commandline strings.
-
-config BLKDEV_RESERVE
- bool "BLKDEV Reserved Memory"
- default n
- help
- Reserved BLKDEV area.
-
-config CONFIG_BLKDEV_RESERVE_ADDRESS
- hex 'start address'
- depends on BLKDEV_RESERVE
- help
- BLKDEV start address.
+source "lib/Kconfig.debug"
+source "arch/h8300/Kconfig.debug"
endmenu
source "security/Kconfig"
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/h8300/Kconfig.debug linux-266-rc1-kdebug/arch/h8300/Kconfig.debug
--- linux-266-rc1-pv/arch/h8300/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/h8300/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,67 @@
+
+menu "H8300 kernel hacking"
+
+config FULLDEBUG
+ bool "Full Symbolic/Source Debugging support"
+ help
+ Enable debugging symbols on kernel build.
+
+config HIGHPROFILE
+ bool "Use fast second timer for profiling"
+ help
+ Use a fast secondary clock to produce profiling information.
+
+config NO_KERNEL_MSG
+ bool "Suppress Kernel BUG Messages"
+ help
+ Do not output any debug BUG messages within the kernel.
+
+config GDB_MAGICPRINT
+ bool "Message Output for GDB MagicPrint service"
+ depends on (H8300H_SIM || H8S_SIM)
+ help
+ kernel messages output useing MagicPrint service from GDB
+
+config SYSCALL_PRINT
+ bool "SystemCall trace print"
+ help
+ outout history of systemcall
+
+config GDB_DEBUG
+ bool "Use gdb stub"
+ depends on (!H8300H_SIM && !H8S_SIM)
+ help
+ gdb stub exception support
+
+config CONFIG_SH_STANDARD_BIOS
+ bool "Use gdb protocol serial console"
+ depends on (!H8300H_SIM && H8S_SIM)
+ help
+ serial console output using GDB protocol.
+ Require eCos/RedBoot
+
+config DEFAULT_CMDLINE
+ bool "Use buildin commandline"
+ default n
+ help
+ buildin kernel commandline enabled.
+
+config KERNEL_COMMAND
+ string "Buildin commmand string"
+ depends on DEFAULT_CMDLINE
+ help
+ buildin kernel commandline strings.
+
+config BLKDEV_RESERVE
+ bool "BLKDEV Reserved Memory"
+ default n
+ help
+ Reserved BLKDEV area.
+
+config CONFIG_BLKDEV_RESERVE_ADDRESS
+ hex 'start address'
+ depends on BLKDEV_RESERVE
+ help
+ BLKDEV start address.
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/i386/Kconfig linux-266-rc1-kdebug/arch/i386/Kconfig
--- linux-266-rc1-pv/arch/i386/Kconfig 2004-04-15 14:00:10.000000000 -0700
+++ linux-266-rc1-kdebug/arch/i386/Kconfig 2004-04-15 14:00:56.000000000 -0700
@@ -1190,129 +1190,9 @@ source "fs/Kconfig"
source "arch/i386/oprofile/Kconfig"
-
menu "Kernel hacking"
-
-config DEBUG_KERNEL
- bool "Kernel debugging"
- help
- Say Y here if you are developing drivers or trying to debug and
- identify kernel problems.
-
-config EARLY_PRINTK
- bool "Early printk" if EMBEDDED
- default y
- help
- Write kernel log output directly into the VGA buffer or to a serial
- port.
-
- This is useful for kernel debugging when your machine crashes very
- early before the console code is initialized. For normal operation
- it is not recommended because it looks ugly and doesn't cooperate
- with klogd/syslogd or the X server. You should normally N here,
- unless you want to debug such a crash.
-
-config DEBUG_STACKOVERFLOW
- bool "Check for stack overflows"
- depends on DEBUG_KERNEL
-
-config DEBUG_STACK_USAGE
- bool "Stack utilization instrumentation"
- depends on DEBUG_KERNEL
- help
- Enables the display of the minimum amount of free stack which each
- task has ever had available in the sysrq-T and sysrq-P debug output.
-
- This option will slow down process creation somewhat.
-
-config DEBUG_SLAB
- bool "Debug memory allocations"
- depends on DEBUG_KERNEL
- help
- Say Y here to have the kernel do limited verification on memory
- allocation as well as poisoning memory on free to catch use of freed
- memory.
-
-config MAGIC_SYSRQ
- bool "Magic SysRq key"
- depends on DEBUG_KERNEL
- help
- If you say Y here, you will have some control over the system even
- if the system crashes for example during kernel debugging (e.g., you
- will be able to flush the buffer cache to disk, reboot the system
- immediately or dump some status information). This is accomplished
- by pressing various keys while holding SysRq (Alt+PrintScreen). It
- also works on a serial console (on PC hardware at least), if you
- send a BREAK and then within 5 seconds a command keypress. The
- keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
- unless you really know what this hack does.
-
-config DEBUG_SPINLOCK
- bool "Spinlock debugging"
- depends on DEBUG_KERNEL
- help
- Say Y here and build SMP to catch missing spinlock initialization
- and certain other kinds of spinlock errors commonly made. This is
- best used in conjunction with the NMI watchdog so that spinlock
- deadlocks are also debuggable.
-
-config DEBUG_PAGEALLOC
- bool "Page alloc debugging"
- depends on DEBUG_KERNEL
- help
- Unmap pages from the kernel linear mapping after free_pages().
- This results in a large slowdown, but helps to find certain types
- of memory corruptions.
-
-config DEBUG_HIGHMEM
- bool "Highmem debugging"
- depends on DEBUG_KERNEL && HIGHMEM
- help
- This options enables addition error checking for high memory systems.
- Disable for production systems.
-
-config DEBUG_INFO
- bool "Compile the kernel with debug info"
- depends on DEBUG_KERNEL
- help
- If you say Y here the resulting kernel image will include
- debugging info resulting in a larger kernel image.
- Say Y here only if you plan to use gdb to debug the kernel.
- If you don't debug the kernel, you can say N.
-
-config DEBUG_SPINLOCK_SLEEP
- bool "Sleep-inside-spinlock checking"
- help
- If you say Y here, various routines which may sleep will become very
- noisy if they are called with a spinlock held.
-
-config FRAME_POINTER
- bool "Compile the kernel with frame pointers"
- help
- If you say Y here the resulting kernel image will be slightly larger
- and slower, but it will give very useful debugging information.
- If you don't debug the kernel, you can say N, but we may not be able
- to solve problems without frame pointers.
-
-config 4KSTACKS
- bool "Use 4Kb for kernel stacks instead of 8Kb"
- help
- If you say Y here the kernel will use a 4Kb stacksize for the
- kernel stack attached to each process/thread. This facilitates
- running more threads on a system and also reduces the pressure
- on the VM subsystem for higher order allocations. This option
- will also use IRQ stacks to compensate for the reduced stackspace.
-
-config X86_FIND_SMP_CONFIG
- bool
- depends on X86_LOCAL_APIC || X86_VOYAGER
- default y
-
-config X86_MPPARSE
- bool
- depends on X86_LOCAL_APIC && !X86_VISWS
- default y
-
+source "lib/Kconfig.debug"
+source "arch/i386/Kconfig.debug"
endmenu
source "security/Kconfig"
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/i386/Kconfig.debug linux-266-rc1-kdebug/arch/i386/Kconfig.debug
--- linux-266-rc1-pv/arch/i386/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/i386/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,15 @@
+
+menu "X86 kernel hacking"
+
+config X86_FIND_SMP_CONFIG
+ bool
+ depends on X86_LOCAL_APIC || X86_VOYAGER
+ default y
+
+config X86_MPPARSE
+ bool
+ depends on X86_LOCAL_APIC && !X86_VISWS
+ default y
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/ia64/Kconfig linux-266-rc1-kdebug/arch/ia64/Kconfig
--- linux-266-rc1-pv/arch/ia64/Kconfig 2004-04-15 14:00:10.000000000 -0700
+++ linux-266-rc1-kdebug/arch/ia64/Kconfig 2004-04-15 14:00:56.000000000 -0700
@@ -396,117 +396,8 @@ source "arch/ia64/hp/sim/Kconfig"
source "arch/ia64/oprofile/Kconfig"
menu "Kernel hacking"
-
-choice
- prompt "Physical memory granularity"
- default IA64_GRANULE_64MB
-
-config IA64_GRANULE_16MB
- bool "16MB"
- help
- IA-64 identity-mapped regions use a large page size called "granules".
-
- Select "16MB" for a small granule size.
- Select "64MB" for a large granule size. This is the current default.
-
-config IA64_GRANULE_64MB
- bool "64MB"
- depends on !(IA64_GENERIC || IA64_HP_ZX1)
-
-endchoice
-
-config DEBUG_KERNEL
- bool "Kernel debugging"
- help
- Say Y here if you are developing drivers or trying to debug and
- identify kernel problems.
-
-config IA64_PRINT_HAZARDS
- bool "Print possible IA-64 dependency violations to console"
- depends on DEBUG_KERNEL
- help
- Selecting this option prints more information for Illegal Dependency
- Faults, that is, for Read-after-Write (RAW), Write-after-Write (WAW),
- or Write-after-Read (WAR) violations. This option is ignored if you
- are compiling for an Itanium A step processor
- (CONFIG_ITANIUM_ASTEP_SPECIFIC). If you're unsure, select Y.
-
-config DISABLE_VHPT
- bool "Disable VHPT"
- depends on DEBUG_KERNEL
- help
- The Virtual Hash Page Table (VHPT) enhances virtual address
- translation performance. Normally you want the VHPT active but you
- can select this option to disable the VHPT for debugging. If you're
- unsure, answer N.
-
-config MAGIC_SYSRQ
- bool "Magic SysRq key"
- depends on DEBUG_KERNEL
- help
- If you say Y here, you will have some control over the system even
- if the system crashes for example during kernel debugging (e.g., you
- will be able to flush the buffer cache to disk, reboot the system
- immediately or dump some status information). This is accomplished
- by pressing various keys while holding SysRq (Alt+PrintScreen). It
- also works on a serial console (on PC hardware at least), if you
- send a BREAK and then within 5 seconds a command keypress. The
- keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
- unless you really know what this hack does.
-
-config DEBUG_SLAB
- bool "Debug memory allocations"
- depends on DEBUG_KERNEL
- help
- Say Y here to have the kernel do limited verification on memory
- allocation as well as poisoning memory on free to catch use of freed
- memory.
-
-config DEBUG_SPINLOCK
- bool "Spinlock debugging"
- depends on DEBUG_KERNEL
- help
- Say Y here and build SMP to catch missing spinlock initialization
- and certain other kinds of spinlock errors commonly made. This is
- best used in conjunction with the NMI watchdog so that spinlock
- deadlocks are also debuggable.
-
-config DEBUG_SPINLOCK_SLEEP
- bool "Sleep-inside-spinlock checking"
- help
- If you say Y here, various routines which may sleep will become very
- noisy if they are called with a spinlock held.
-
-config IA64_DEBUG_CMPXCHG
- bool "Turn on compare-and-exchange bug checking (slow!)"
- depends on DEBUG_KERNEL
- help
- Selecting this option turns on bug checking for the IA-64
- compare-and-exchange instructions. This is slow! Itaniums
- from step B3 or later don't have this problem. If you're unsure,
- select N.
-
-config IA64_DEBUG_IRQ
- bool "Turn on irq debug checks (slow!)"
- depends on DEBUG_KERNEL
- help
- Selecting this option turns on bug checking for the IA-64 irq_save
- and restore instructions. It's useful for tracking down spinlock
- problems, but slow! If you're unsure, select N.
-
-config DEBUG_INFO
- bool "Compile the kernel with debug info"
- depends on DEBUG_KERNEL
- help
- If you say Y here the resulting kernel image will include
- debugging info resulting in a larger kernel image.
- Say Y here only if you plan to use gdb to debug the kernel.
- If you don't debug the kernel, you can say N.
-
-config SYSVIPC_COMPAT
- bool
- depends on COMPAT && SYSVIPC
- default y
+source "lib/Kconfig.debug"
+source "arch/ia64/Kconfig.debug"
endmenu
source "security/Kconfig"
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/ia64/Kconfig.debug linux-266-rc1-kdebug/arch/ia64/Kconfig.debug
--- linux-266-rc1-pv/arch/ia64/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/ia64/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,63 @@
+
+menu "IA64 kernel hacking"
+
+choice
+ prompt "Physical memory granularity"
+ default IA64_GRANULE_64MB
+
+config IA64_GRANULE_16MB
+ bool "16MB"
+ help
+ IA-64 identity-mapped regions use a large page size called "granules".
+
+ Select "16MB" for a small granule size.
+ Select "64MB" for a large granule size. This is the current default.
+
+config IA64_GRANULE_64MB
+ bool "64MB"
+ depends on !(IA64_GENERIC || IA64_HP_ZX1)
+
+endchoice
+
+config IA64_PRINT_HAZARDS
+ bool "Print possible IA-64 dependency violations to console"
+ depends on DEBUG_KERNEL
+ help
+ Selecting this option prints more information for Illegal Dependency
+ Faults, that is, for Read-after-Write (RAW), Write-after-Write (WAW),
+ or Write-after-Read (WAR) violations. This option is ignored if you
+ are compiling for an Itanium A step processor
+ (CONFIG_ITANIUM_ASTEP_SPECIFIC). If you're unsure, select Y.
+
+config DISABLE_VHPT
+ bool "Disable VHPT"
+ depends on DEBUG_KERNEL
+ help
+ The Virtual Hash Page Table (VHPT) enhances virtual address
+ translation performance. Normally you want the VHPT active but you
+ can select this option to disable the VHPT for debugging. If you're
+ unsure, answer N.
+
+config IA64_DEBUG_CMPXCHG
+ bool "Turn on compare-and-exchange bug checking (slow!)"
+ depends on DEBUG_KERNEL
+ help
+ Selecting this option turns on bug checking for the IA-64
+ compare-and-exchange instructions. This is slow! Itaniums
+ from step B3 or later don't have this problem. If you're unsure,
+ select N.
+
+config IA64_DEBUG_IRQ
+ bool "Turn on irq debug checks (slow!)"
+ depends on DEBUG_KERNEL
+ help
+ Selecting this option turns on bug checking for the IA-64 irq_save
+ and restore instructions. It's useful for tracking down spinlock
+ problems, but slow! If you're unsure, select N.
+
+config SYSVIPC_COMPAT
+ bool
+ depends on COMPAT && SYSVIPC
+ default y
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/m68k/Kconfig.debug linux-266-rc1-kdebug/arch/m68k/Kconfig.debug
--- linux-266-rc1-pv/arch/m68k/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/m68k/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,9 @@
+
+menu "M68K kernel hacking"
+
+config DEBUG_BUGVERBOSE
+ bool "Verbose BUG() reporting"
+ depends on DEBUG_KERNEL
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/m68knommu/Kconfig linux-266-rc1-kdebug/arch/m68knommu/Kconfig
--- linux-266-rc1-pv/arch/m68knommu/Kconfig 2004-04-15 14:00:10.000000000 -0700
+++ linux-266-rc1-kdebug/arch/m68knommu/Kconfig 2004-04-15 14:00:56.000000000 -0700
@@ -512,58 +512,8 @@ source "drivers/Kconfig"
source "fs/Kconfig"
menu "Kernel hacking"
-
-config FULLDEBUG
- bool "Full Symbolic/Source Debugging support"
- help
- Enable debuging symbols on kernel build.
-
-config FRAME_POINTER
- bool "Compile the kernel with frame pointers"
- help
- If you say Y here the resulting kernel image will be slightly larger
- and slower, but it will give very useful debugging information.
- If you don't debug the kernel, you can say N, but we may not be able
- to solve problems without frame pointers.
-
-config MAGIC_SYSRQ
- bool "Magic SysRq key"
- help
- Enables console device to interpret special characters as
- commands to dump state information.
-
-config HIGHPROFILE
- bool "Use fast second timer for profiling"
- depends on COLDFIRE
- help
- Use a fast secondary clock to produce profiling information.
-
-config BOOTPARAM
- bool 'Compiled-in Kernel Boot Parameter'
-
-config BOOTPARAM_STRING
- string 'Kernel Boot Parameter'
- default 'console=ttyS0,19200'
- depends on BOOTPARAM
-
-config DUMPTOFLASH
- bool "Panic/Dump to FLASH"
- depends on COLDFIRE
- help
- Dump any panic of trap output into a flash memory segment
- for later analysis.
-
-config NO_KERNEL_MSG
- bool "Suppress Kernel BUG Messages"
- help
- Do not output any debug BUG messages within the kernel.
-
-config BDM_DISABLE
- bool "Disable BDM signals"
- depends on (EXPERIMENTAL && COLDFIRE)
- help
- Disable the ColdFire CPU's BDM signals.
-
+source "lib/Kconfig.debug"
+source "arch/m68knommu/Kconfig.debug"
endmenu
source "security/Kconfig"
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/m68knommu/Kconfig.debug linux-266-rc1-kdebug/arch/m68knommu/Kconfig.debug
--- linux-266-rc1-pv/arch/m68knommu/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/m68knommu/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,42 @@
+
+menu "M68K-nommu kernel hacking"
+
+config FULLDEBUG
+ bool "Full Symbolic/Source Debugging support"
+ help
+ Enable debuging symbols on kernel build.
+
+config HIGHPROFILE
+ bool "Use fast second timer for profiling"
+ depends on COLDFIRE
+ help
+ Use a fast secondary clock to produce profiling information.
+
+config BOOTPARAM
+ bool 'Compiled-in Kernel Boot Parameter'
+
+config BOOTPARAM_STRING
+ string 'Kernel Boot Parameter'
+ default 'console=ttyS0,19200'
+ depends on BOOTPARAM
+
+config DUMPTOFLASH
+ bool "Panic/Dump to FLASH"
+ depends on COLDFIRE
+ help
+ Dump any panic of trap output into a flash memory segment
+ for later analysis.
+
+config NO_KERNEL_MSG
+ bool "Suppress Kernel BUG Messages"
+ help
+ Do not output any debug BUG messages within the kernel.
+
+config BDM_DISABLE
+ bool "Disable BDM signals"
+ depends on (EXPERIMENTAL && COLDFIRE)
+ help
+ Disable the ColdFire CPU's BDM signals.
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/mips/Kconfig.debug linux-266-rc1-kdebug/arch/mips/Kconfig.debug
--- linux-266-rc1-pv/arch/mips/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/mips/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,67 @@
+
+menu "MIPS kernel hacking"
+
+config CROSSCOMPILE
+ bool "Are you using a crosscompiler"
+ help
+ Say Y here if you are compiling the kernel on a different
+ architecture than the one it is intended to run on.
+
+config CMDLINE
+ string "Default kernel command string"
+ default ""
+ help
+ On some platforms, there is currently no way for the boot loader to
+ pass arguments to the kernel. For these platforms, you can supply
+ some command-line options at build time by entering them here. In
+ other cases you can specify kernel args so that you don't have
+ to set them up in board prom initialization routines.
+
+config KGDB
+ bool "Remote GDB kernel debugging"
+ depends on DEBUG_KERNEL
+ select DEBUG_INFO
+ help
+ If you say Y here, it will be possible to remotely debug the MIPS
+ kernel using gdb. This enlarges your kernel image disk size by
+ several megabytes and requires a machine with more than 16 MB,
+ better 32 MB RAM to avoid excessive linking time. This is only
+ useful for kernel hackers. If unsure, say N.
+
+config GDB_CONSOLE
+ bool "Console output to GDB"
+ depends on KGDB
+ help
+ If you are using GDB for remote debugging over a serial port and
+ would like kernel messages to be formatted into GDB $O packets so
+ that GDB prints them as program output, say 'Y'.
+
+config SB1XXX_CORELIS
+ bool "Corelis Debugger"
+ depends on SIBYTE_SB1xxx_SOC && DEBUG_INFO
+ help
+ Select compile flags that produce code that can be processed by the
+ Corelis mksym utility and UDB Emulator.
+
+config RUNTIME_DEBUG
+ bool "Enable run-time debugging"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here, some debugging macros will do run-time checking.
+ If you say N here, those macros will mostly turn to no-ops. See
+ include/asm-mips/debug.h for debuging macros.
+ If unsure, say N.
+
+
+config MIPS_UNCACHED
+ bool "Run uncached"
+ depends on DEBUG_KERNEL && !SMP && !SGI_IP27
+ help
+ If you say Y here there kernel will disable all CPU caches. This will
+ reduce the system's performance dramatically but can help finding
+ otherwise hard to track bugs. It can also useful if you're doing
+ hardware debugging with a logic analyzer and need to see all traffic
+ on the bus.
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/parisc/Kconfig.debug linux-266-rc1-kdebug/arch/parisc/Kconfig.debug
--- linux-266-rc1-pv/arch/parisc/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/parisc/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,5 @@
+
+menu "PA-RISC kernel hacking"
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/ppc/Kconfig.debug linux-266-rc1-kdebug/arch/ppc/Kconfig.debug
--- linux-266-rc1-pv/arch/ppc/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/ppc/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,72 @@
+
+menu "PPC kernel hacking"
+
+config KGDB
+ bool "Include kgdb kernel debugger"
+ depends on DEBUG_KERNEL
+ select DEBUG_INFO
+ help
+ Include in-kernel hooks for kgdb, the Linux kernel source level
+ debugger. See <http://kgdb.sourceforge.net/> for more information.
+ Unless you are intending to debug the kernel, say N here.
+
+choice
+ prompt "Serial Port"
+ depends on KGDB
+ default KGDB_TTYS1
+
+config KGDB_TTYS0
+ bool "ttyS0"
+
+config KGDB_TTYS1
+ bool "ttyS1"
+
+config KGDB_TTYS2
+ bool "ttyS2"
+
+config KGDB_TTYS3
+ bool "ttyS3"
+
+endchoice
+
+config KGDB_CONSOLE
+ bool "Enable serial console thru kgdb port"
+ depends on KGDB && 8xx || 8260
+ help
+ If you enable this, all serial console messages will be sent
+ over the gdb stub.
+ If unsure, say N.
+
+config XMON
+ bool "Include xmon kernel debugger"
+ depends on DEBUG_KERNEL
+ help
+ Include in-kernel hooks for the xmon kernel monitor/debugger.
+ Unless you are intending to debug the kernel, say N here.
+
+config BDI_SWITCH
+ bool "Include BDI-2000 user context switcher"
+ depends on DEBUG_KERNEL
+ help
+ Include in-kernel support for the Abatron BDI2000 debugger.
+ Unless you are intending to debug the kernel with one of these
+ machines, say N here.
+
+config BOOTX_TEXT
+ bool "Support for early boot text console (BootX or OpenFirmware only)"
+ depends PPC_OF
+ help
+ Say Y here to see progress messages from the boot firmware in text
+ mode. Requires either BootX or Open Firmware.
+
+config SERIAL_TEXT_DEBUG
+ bool "Support for early boot texts over serial port"
+ depends on 4xx || GT64260 || LOPEC || PPLUS || PRPMC800 || PPC_GEN550
+
+config OCP
+ bool
+ depends on IBM_OCP
+ default y
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/ppc64/Kconfig linux-266-rc1-kdebug/arch/ppc64/Kconfig
--- linux-266-rc1-pv/arch/ppc64/Kconfig 2004-04-15 14:00:10.000000000 -0700
+++ linux-266-rc1-kdebug/arch/ppc64/Kconfig 2004-04-15 14:00:56.000000000 -0700
@@ -28,10 +28,6 @@ config HAVE_DEC_LOCK
bool
default y
-config EARLY_PRINTK
- bool
- default y
-
config COMPAT
bool
default y
@@ -322,79 +318,8 @@ config VIOPATH
source "arch/ppc64/oprofile/Kconfig"
menu "Kernel hacking"
-
-config DEBUG_KERNEL
- bool "Kernel debugging"
- help
- Say Y here if you are developing drivers or trying to debug and
- identify kernel problems.
-
-config DEBUG_STACKOVERFLOW
- bool "Check for stack overflows"
- depends on DEBUG_KERNEL
-
-config DEBUG_STACK_USAGE
- bool "Stack utilization instrumentation"
- depends on DEBUG_KERNEL
- help
- Enables the display of the minimum amount of free stack which each
- task has ever had available in the sysrq-T and sysrq-P debug output.
-
- This option will slow down process creation somewhat.
-
-config DEBUG_SLAB
- bool "Debug memory allocations"
- depends on DEBUG_KERNEL
- help
- Say Y here to have the kernel do limited verification on memory
- allocation as well as poisoning memory on free to catch use of freed
- memory.
-
-config MAGIC_SYSRQ
- bool "Magic SysRq key"
- depends on DEBUG_KERNEL
- help
- If you say Y here, you will have some control over the system even
- if the system crashes for example during kernel debugging (e.g., you
- will be able to flush the buffer cache to disk, reboot the system
- immediately or dump some status information). This is accomplished
- by pressing various keys while holding SysRq (Alt+PrintScreen). It
- also works on a serial console (on PC hardware at least), if you
- send a BREAK and then within 5 seconds a command keypress. The
- keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
- unless you really know what this hack does.
-
-config DEBUGGER
- bool "Enable debugger hooks"
- depends on DEBUG_KERNEL
- help
- Include in-kernel hooks for kernel debuggers. Unless you are
- intending to debug the kernel, say N here.
-
-config XMON
- bool "Include xmon kernel debugger"
- depends on DEBUGGER
- help
- Include in-kernel hooks for the xmon kernel monitor/debugger.
- Unless you are intending to debug the kernel, say N here.
-
-config XMON_DEFAULT
- bool "Enable xmon by default"
- depends on XMON
-
-config PPCDBG
- bool "Include PPCDBG realtime debugging"
- depends on DEBUG_KERNEL
-
-config DEBUG_INFO
- bool "Compile the kernel with debug info"
- depends on DEBUG_KERNEL
- help
- If you say Y here the resulting kernel image will include
- debugging info resulting in a larger kernel image.
- Say Y here only if you plan to use gdb to debug the kernel.
- If you don't debug the kernel, you can say N.
-
+source "lib/Kconfig.debug"
+source "arch/ppc64/Kconfig.debug"
endmenu
source "security/Kconfig"
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/ppc64/Kconfig.debug linux-266-rc1-kdebug/arch/ppc64/Kconfig.debug
--- linux-266-rc1-pv/arch/ppc64/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/ppc64/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,27 @@
+
+menu "PPC64 kernel hacking"
+
+config DEBUGGER
+ bool "Enable debugger hooks"
+ depends on DEBUG_KERNEL
+ help
+ Include in-kernel hooks for kernel debuggers. Unless you are
+ intending to debug the kernel, say N here.
+
+config XMON
+ bool "Include xmon kernel debugger"
+ depends on DEBUGGER
+ help
+ Include in-kernel hooks for the xmon kernel monitor/debugger.
+ Unless you are intending to debug the kernel, say N here.
+
+config XMON_DEFAULT
+ bool "Enable xmon by default"
+ depends on XMON
+
+config PPCDBG
+ bool "Include PPCDBG realtime debugging"
+ depends on DEBUG_KERNEL
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/s390/Kconfig.debug linux-266-rc1-kdebug/arch/s390/Kconfig.debug
--- linux-266-rc1-pv/arch/s390/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/s390/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,5 @@
+
+menu "S/390 kernel hacking"
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/sh/Kconfig.debug linux-266-rc1-kdebug/arch/sh/Kconfig.debug
--- linux-266-rc1-pv/arch/sh/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/sh/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,111 @@
+
+menu "SuperH kernel hacking"
+
+config SH_STANDARD_BIOS
+ bool "Use LinuxSH standard BIOS"
+ help
+ Say Y here if your target has the gdb-sh-stub
+ package from www.m17n.org (or any conforming standard LinuxSH BIOS)
+ in FLASH or EPROM. The kernel will use standard BIOS calls during
+ boot for various housekeeping tasks (including calls to read and
+ write characters to a system console, get a MAC address from an
+ on-board Ethernet interface, and shut down the hardware). Note this
+ does not work with machines with an existing operating system in
+ mask ROM and no flash (WindowsCE machines fall in this category).
+ If unsure, say N.
+
+config SH_EARLY_PRINTK
+ bool "Early printk support"
+ depends on SH_STANDARD_BIOS
+ help
+ Say Y here to redirect kernel printk messages to the serial port
+ used by the SH-IPL bootloader, starting very early in the boot
+ process and ending when the kernel's serial console is initialised.
+ This option is only useful porting the kernel to a new machine,
+ when the kernel may crash or hang before the serial console is
+ initialised. If unsure, say N.
+
+config KGDB
+ bool "Include KGDB kernel debugger"
+ help
+ Include in-kernel hooks for kgdb, the Linux kernel source level
+ debugger. See <http://kgdb.sourceforge.net/> for more information.
+ Unless you are intending to debug the kernel, say N here.
+
+menu "KGDB configuration options"
+ depends on KGDB
+
+config MORE_COMPILE_OPTIONS
+ bool "Add any additional compile options"
+ help
+ If you want to add additional CFLAGS to the kernel build, enable this
+ option and then enter what you would like to add in the next question.
+ Note however that -g is already appended with the selection of KGDB.
+
+config COMPILE_OPTIONS
+ string "Additional compile arguments"
+ depends on MORE_COMPILE_OPTIONS
+
+config KGDB_NMI
+ bool "Enter KGDB on NMI"
+ default n
+
+config KGDB_THREAD
+ bool "Include KGDB thread support"
+ default y
+
+config SH_KGDB_CONSOLE
+ bool "Console messages through GDB"
+ default n
+
+config KGDB_SYSRQ
+ bool "Allow SysRq 'G' to enter KGDB"
+ default y
+
+config KGDB_KERNEL_ASSERTS
+ bool "Include KGDB kernel assertions"
+ default n
+
+comment "Serial port setup"
+
+config KGDB_DEFPORT
+ int "Port number (ttySCn)"
+ default "1"
+
+config KGDB_DEFBAUD
+ int "Baud rate"
+ default "115200"
+
+choice
+ prompt "Parity"
+ depends on KGDB
+ default KGDB_DEFPARITY_N
+
+config KGDB_DEFPARITY_N
+ bool "None"
+
+config KGDB_DEFPARITY_E
+ bool "Even"
+
+config KGDB_DEFPARITY_O
+ bool "Odd"
+
+endchoice
+
+choice
+ prompt "Data bits"
+ depends on KGDB
+ default KGDB_DEFBITS_8
+
+config KGDB_DEFBITS_8
+ bool "8"
+
+config KGDB_DEFBITS_7
+ bool "7"
+
+endchoice
+
+endmenu
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/sparc/Kconfig.debug linux-266-rc1-kdebug/arch/sparc/Kconfig.debug
--- linux-266-rc1-pv/arch/sparc/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/sparc/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,13 @@
+
+menu "SPARC kernel hacking"
+
+config DEBUG_BUGVERBOSE
+ bool "Verbose BUG() reporting (adds 70K)"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here to make BUG() panics output the file name and line number
+ of the BUG call as well as the EIP and oops trace. This aids
+ debugging but costs about 70-100K of memory.
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/sparc64/Kconfig.debug linux-266-rc1-kdebug/arch/sparc64/Kconfig.debug
--- linux-266-rc1-pv/arch/sparc64/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/sparc64/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,38 @@
+
+menu "UltraSPARC kernel hacking"
+
+config DEBUG_BUGVERBOSE
+ bool "Verbose BUG() reporting (adds 70K)"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here to make BUG() panics output the file name and line number
+ of the BUG call as well as the EIP and oops trace. This aids
+ debugging but costs about 70-100K of memory.
+
+config DEBUG_DCFLUSH
+ bool "D-cache flush debugging"
+ depends on DEBUG_KERNEL
+
+config STACK_DEBUG
+ depends on DEBUG_KERNEL
+ bool "Stack Overflow Detection Support"
+
+config DEBUG_BOOTMEM
+ depends on DEBUG_KERNEL
+ bool "Debug BOOTMEM initialization"
+
+# We have a custom atomic_dec_and_lock() implementation but it's not
+# compatible with spinlock debugging so we need to fall back on
+# the generic version in that case.
+config HAVE_DEC_LOCK
+ bool
+ depends on SMP && !DEBUG_SPINLOCK
+ default y
+
+config MCOUNT
+ bool
+ depends on STACK_DEBUG
+ default y
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/um/Kconfig linux-266-rc1-kdebug/arch/um/Kconfig
--- linux-266-rc1-pv/arch/um/Kconfig 2004-04-15 14:00:11.000000000 -0700
+++ linux-266-rc1-kdebug/arch/um/Kconfig 2004-04-15 14:00:56.000000000 -0700
@@ -102,10 +102,6 @@ config MCONSOLE
It is safe to say 'Y' here.
-config MAGIC_SYSRQ
- bool "Magic SysRq key"
- depends on MCONSOLE
-
config HOST_2G_2G
bool "2G/2G host address space split"
@@ -213,59 +209,8 @@ source "drivers/md/Kconfig"
source "drivers/mtd/Kconfig"
-
menu "Kernel hacking"
-
-config DEBUG_SLAB
- bool "Debug memory allocations"
-
-config DEBUG_SPINLOCK
- bool "Debug spinlocks usage"
-
-config DEBUG_INFO
- bool "Enable kernel debugging symbols"
- help
- When this is enabled, the User-Mode Linux binary will include
- debugging symbols. This enlarges the binary by a few megabytes,
- but aids in tracking down kernel problems in UML. It is required
- if you intend to do any kernel development.
-
- If you're truly short on disk space or don't expect to report any
- bugs back to the UML developers, say N, otherwise say Y.
-
-config FRAME_POINTER
- bool
- default y if DEBUG_INFO
-
-config PT_PROXY
- bool "Enable ptrace proxy"
- depends on XTERM_CHAN && DEBUG_INFO
-
-config GPROF
- bool "Enable gprof support"
- depends on DEBUG_INFO
- help
- This allows profiling of a User-Mode Linux kernel with the gprof
- utility.
-
- See <http://user-mode-linux.sourceforge.net/gprof.html> for more
- details.
-
- If you're involved in UML kernel development and want to use gprof,
- say Y. If you're unsure, say N.
-
-config GCOV
- bool "Enable gcov support"
- depends on DEBUG_INFO
- help
- This option allows developers to retrieve coverage data from a UML
- session.
-
- See <http://user-mode-linux.sourceforge.net/gprof.html> for more
- details.
-
- If you're involved in UML kernel development and want to use gcov,
- say Y. If you're unsure, say N.
-
+source "lib/Kconfig.debug"
+source "arch/um/Kconfig.debug"
endmenu
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/um/Kconfig.debug linux-266-rc1-kdebug/arch/um/Kconfig.debug
--- linux-266-rc1-pv/arch/um/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/um/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,35 @@
+
+menu "UML kernel hacking"
+
+config PT_PROXY
+ bool "Enable ptrace proxy"
+ depends on XTERM_CHAN && DEBUG_INFO
+
+config GPROF
+ bool "Enable gprof support"
+ depends on DEBUG_INFO
+ help
+ This allows profiling of a User-Mode Linux kernel with the gprof
+ utility.
+
+ See <http://user-mode-linux.sourceforge.net/gprof.html> for more
+ details.
+
+ If you're involved in UML kernel development and want to use gprof,
+ say Y. If you're unsure, say N.
+
+config GCOV
+ bool "Enable gcov support"
+ depends on DEBUG_INFO
+ help
+ This option allows developers to retrieve coverage data from a UML
+ session.
+
+ See <http://user-mode-linux.sourceforge.net/gprof.html> for more
+ details.
+
+ If you're involved in UML kernel development and want to use gcov,
+ say Y. If you're unsure, say N.
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/v850/Kconfig.debug linux-266-rc1-kdebug/arch/v850/Kconfig.debug
--- linux-266-rc1-pv/arch/v850/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/v850/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,10 @@
+
+menu "V850 kernel hacking"
+
+config NO_KERNEL_MSG
+ bool "Suppress Kernel BUG Messages"
+ help
+ Do not output any debug BUG messages within the kernel.
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/x86_64/Kconfig linux-266-rc1-kdebug/arch/x86_64/Kconfig
--- linux-266-rc1-pv/arch/x86_64/Kconfig 2004-04-15 14:00:11.000000000 -0700
+++ linux-266-rc1-kdebug/arch/x86_64/Kconfig 2004-04-15 14:00:56.000000000 -0700
@@ -410,104 +410,8 @@ source fs/Kconfig
source "arch/x86_64/oprofile/Kconfig"
menu "Kernel hacking"
-
-config DEBUG_KERNEL
- bool "Kernel debugging"
- help
- Say Y here if you are developing drivers or trying to debug and
- identify kernel problems.
-
-config DEBUG_SLAB
- bool "Debug memory allocations"
- depends on DEBUG_KERNEL
- help
- Say Y here to have the kernel do limited verification on memory
- allocation as well as poisoning memory on free to catch use of freed
- memory.
-
-config MAGIC_SYSRQ
- bool "Magic SysRq key"
- help
- If you say Y here, you will have some control over the system even
- if the system crashes for example during kernel debugging (e.g., you
- will be able to flush the buffer cache to disk, reboot the system
- immediately or dump some status information). This is accomplished
- by pressing various keys while holding SysRq (Alt+PrintScreen). It
- also works on a serial console (on PC hardware at least), if you
- send a BREAK and then within 5 seconds a command keypress. The
- keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
- unless you really know what this hack does.
-
-config DEBUG_SPINLOCK
- bool "Spinlock debugging"
- depends on DEBUG_KERNEL
- help
- Say Y here and build SMP to catch missing spinlock initialization
- and certain other kinds of spinlock errors commonly made. This is
- best used in conjunction with the NMI watchdog so that spinlock
- deadlocks are also debuggable.
-
-# !SMP for now because the context switch early causes GPF in segment reloading
-# and the GS base checking does the wrong thing then, causing a hang.
-config CHECKING
- bool "Additional run-time checks"
- depends on DEBUG_KERNEL && !SMP
- help
- Enables some internal consistency checks for kernel debugging.
- You should normally say N.
-
-config INIT_DEBUG
- bool "Debug __init statements"
- depends on DEBUG_KERNEL
- help
- Fill __init and __initdata at the end of boot. This helps debugging
- illegal uses of __init and __initdata after initialization.
-
-config DEBUG_INFO
- bool "Compile the kernel with debug info"
- depends on DEBUG_KERNEL
- help
- If you say Y here the resulting kernel image will include
- debugging info resulting in a larger kernel image.
- Say Y here only if you plan to use gdb to debug the kernel.
- Please note that this option requires new binutils.
- If you don't debug the kernel, you can say N.
-
-config FRAME_POINTER
- bool "Compile the kernel with frame pointers"
- help
- Compile the kernel with frame pointers. This may help for some
- debugging with external debuggers. Note the standard oops backtracer
- doesn't make use of this and the x86-64 kernel doesn't ensure an consistent
- frame pointer through inline assembly (semaphores etc.)
- Normally you should say N.
-
-config IOMMU_DEBUG
- depends on GART_IOMMU && DEBUG_KERNEL
- bool "Enable IOMMU debugging"
- help
- Force the IOMMU to on even when you have less than 4GB of
- memory and add debugging code. On overflow always panic. And
- allow to enable IOMMU leak tracing. Can be disabled at boot
- time with iommu=noforce. This will also enable scatter gather
- list merging. Currently not recommended for production
- code. When you use it make sure you have a big enough
- IOMMU/AGP aperture. Most of the options enabled by this can
- be set more finegrained using the iommu= command line
- options. See Documentation/x86_64/boot-options.txt for more
- details.
-
-config IOMMU_LEAK
- bool "IOMMU leak tracing"
- depends on DEBUG_KERNEL
- depends on IOMMU_DEBUG
- help
- Add a simple leak tracer to the IOMMU code. This is useful when you
- are debugging a buggy device driver that leaks IOMMU mappings.
-
-#config X86_REMOTE_DEBUG
-# bool "kgdb debugging stub"
-
+source "lib/Kconfig.debug"
+source "arch/x86_64/Kconfig.debug"
endmenu
source "security/Kconfig"
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/arch/x86_64/Kconfig.debug linux-266-rc1-kdebug/arch/x86_64/Kconfig.debug
--- linux-266-rc1-pv/arch/x86_64/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/arch/x86_64/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,47 @@
+
+menu "X86-64 kernel hacking"
+
+# !SMP for now because the context switch early causes GPF in segment reloading
+# and the GS base checking does the wrong thing then, causing a hang.
+config CHECKING
+ bool "Additional run-time checks"
+ depends on DEBUG_KERNEL && !SMP
+ help
+ Enables some internal consistency checks for kernel debugging.
+ You should normally say N.
+
+config INIT_DEBUG
+ bool "Debug __init statements"
+ depends on DEBUG_KERNEL
+ help
+ Fill __init and __initdata at the end of boot. This helps debugging
+ illegal uses of __init and __initdata after initialization.
+
+config IOMMU_DEBUG
+ depends on GART_IOMMU && DEBUG_KERNEL
+ bool "Enable IOMMU debugging"
+ help
+ Force the IOMMU to on even when you have less than 4GB of
+ memory and add debugging code. On overflow always panic. And
+ allow to enable IOMMU leak tracing. Can be disabled at boot
+ time with iommu=noforce. This will also enable scatter gather
+ list merging. Currently not recommended for production
+ code. When you use it make sure you have a big enough
+ IOMMU/AGP aperture. Most of the options enabled by this can
+ be set more finegrained using the iommu= command line
+ options. See Documentation/x86_64/boot-options.txt for more
+ details.
+
+config IOMMU_LEAK
+ bool "IOMMU leak tracing"
+ depends on DEBUG_KERNEL
+ depends on IOMMU_DEBUG
+ help
+ Add a simple leak tracer to the IOMMU code. This is useful when you
+ are debugging a buggy device driver that leaks IOMMU mappings.
+
+#config X86_REMOTE_DEBUG
+# bool "kgdb debugging stub"
+
+endmenu
+
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/init/Kconfig linux-266-rc1-kdebug/init/Kconfig
--- linux-266-rc1-pv/init/Kconfig 2004-04-15 14:00:13.000000000 -0700
+++ linux-266-rc1-kdebug/init/Kconfig 2004-04-15 14:00:56.000000000 -0700
@@ -227,14 +227,6 @@ menuconfig EMBEDDED
environments which can tolerate a "non-standard" kernel.
Only use this if you really know what you are doing.
-config KALLSYMS
- bool "Load all symbols for debugging/kksymoops" if EMBEDDED
- default y
- help
- Say Y here to let the kernel print out symbolic crash information and
- symbolic stack backtraces. This increases the size of the kernel
- somewhat, as all symbols have to be loaded into the kernel image.
-
config FUTEX
bool "Enable futex support" if EMBEDDED
default y
diff -Naurp -X /home/rddunlap/doc/dontdiff-osdl linux-266-rc1-pv/lib/Kconfig.debug linux-266-rc1-kdebug/lib/Kconfig.debug
--- linux-266-rc1-pv/lib/Kconfig.debug 1969-12-31 16:00:00.000000000 -0800
+++ linux-266-rc1-kdebug/lib/Kconfig.debug 2004-04-15 14:00:56.000000000 -0700
@@ -0,0 +1,151 @@
+
+menu "Generic kernel hacking"
+
+if !CRIS && !H8300
+
+config DEBUG_KERNEL
+ bool "Kernel debugging"
+ default y if USERMODE
+ help
+ Say Y here if you are developing drivers or trying to debug and
+ identify kernel problems.
+
+config MAGIC_SYSRQ
+ bool "Magic SysRq key" if !CRIS
+ depends on DEBUG_KERNEL || MCONSOLE
+ help
+ If you say Y here, you will have some control over the system even
+ if the system crashes for example during kernel debugging (e.g., you
+ will be able to flush the buffer cache to disk, reboot the system
+ immediately or dump some status information). This is accomplished
+ by pressing various keys while holding SysRq (Alt+PrintScreen). It
+ also works on a serial console (on PC hardware at least), if you
+ send a BREAK and then within 5 seconds a command keypress. The
+ keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+ unless you really know what this hack does.
+
+config KALLSYMS
+ bool "Load all symbols for debugging/kksymoops" if EMBEDDED
+ default y if !ARCH_S390
+ help
+ Say Y here to let the kernel print out symbolic crash information and
+ symbolic stack backtraces. This increases the size of the kernel
+ somewhat, as all symbols have to be loaded into the kernel image.
+
+if X86 || X86_64 || MACH_DECSTATION || ALPHA_GENERIC || ALPHA_SRM || PPC64
+
+config EARLY_PRINTK
+ bool "Early printk" if EMBEDDED
+ default y
+ help
+ Write kernel log output directly into the VGA buffer or to a serial
+ port.
+
+ This is useful for kernel debugging when your machine crashes very
+ early before the console code is initialized. For normal operation
+ it is not recommended because it looks ugly and doesn't cooperate
+ with klogd/syslogd or the X server. You should normally N here,
+ unless you want to debug such a crash.
+
+endif
+
+config DEBUG_STACKOVERFLOW
+ bool "Check for stack overflows"
+ depends on DEBUG_KERNEL && !ALPHA
+
+config DEBUG_STACK_USAGE
+ bool "Stack utilization instrumentation"
+ depends on DEBUG_KERNEL && !ALPHA
+ help
+ Enables the display of the minimum amount of free stack which each
+ task has ever had available in the sysrq-T and sysrq-P debug output.
+
+ This option will slow down process creation somewhat.
+
+config DEBUG_SLAB
+ bool "Debug memory allocations"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here to have the kernel do limited verification on memory
+ allocation as well as poisoning memory on free to catch use of freed
+ memory.
+
+config DEBUG_SPINLOCK
+ bool "Spinlock debugging"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here and build SMP to catch missing spinlock initialization
+ and certain other kinds of spinlock errors commonly made. This is
+ best used in conjunction with the NMI watchdog so that spinlock
+ deadlocks are also debuggable.
+
+config DEBUG_PAGEALLOC
+ bool "Page alloc debugging"
+ depends on DEBUG_KERNEL
+ help
+ Unmap pages from the kernel linear mapping after free_pages().
+ This results in a large slowdown, but helps to find certain types
+ of memory corruptions.
+
+config DEBUG_HIGHMEM
+ bool "Highmem debugging"
+ depends on DEBUG_KERNEL && HIGHMEM
+ help
+ This options enables addition error checking for high memory systems.
+ Disable for production systems.
+
+config DEBUG_INFO
+ bool "Compile the kernel with debug info"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here the resulting kernel image will include
+ debugging info resulting in a larger kernel image.
+ Say Y here only if you plan to use gdb to debug the kernel.
+ If you don't debug the kernel, you can say N.
+
+config DEBUG_SPINLOCK_SLEEP
+ bool "Sleep-inside-spinlock checking"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here, various routines which may sleep will become very
+ noisy if they are called with a spinlock held.
+
+if !ARM && !ARM26 && !X86_64
+config FRAME_POINTER
+ bool "Compile the kernel with frame pointers"
+ default y if (SUPERH && KGDB) || (USERMODE && DEBUG_INFO)
+ help
+ If you say Y here the resulting kernel image will be slightly larger
+ and slower, but it will give very useful debugging information.
+ If you don't debug the kernel, you can say N, but we may not be able
+ to solve problems without frame pointers.
+endif
+if X86_64
+config FRAME_POINTER
+ bool "Compile the kernel with frame pointers"
+ help
+ If you say Y here the resulting kernel image will be slightly larger
+ and slower, but it will give very useful debugging information.
+ If you don't debug the kernel, you can say N, but we may not be able
+ to solve problems without frame pointers.
+ This may help for some debugging with external debuggers.
+ Note the standard oops backtracer doesn't make use of this and
+ the x86-64 kernel doesn't ensure a consistent
+ frame pointer through inline assembly (semaphores etc.)
+ Normally you should say N.
+endif
+
+config 4KSTACKS
+ bool "Use 4Kb for kernel stacks instead of 8Kb"
+ help
+ If you say Y here the kernel will use a 4Kb stacksize for the
+ kernel stack attached to each process/thread. This facilitates
+ running more threads on a system and also reduces the pressure
+ on the VM subsystem for higher order allocations. This option
+ will also use IRQ stacks to compensate for the reduced stackspace.
+
+endif
+#end for !CRIS && !H8300
+
+endmenu
+
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/