Re: poor sata performance on 2.6

[Justin Cormack]

hmm, odd. I get 50MB/s or so from normal (7200, 8MB cache) WD disks, and
Seagate from the same controller. Can you send lspci, /proc/interrupts
and dmesg...

Justin


On Thu, 2004-04-15 at 14:34, Konstantin Sobolev wrote:
> On Thursday 15 April 2004 16:02, Justin Cormack wrote:
> > Ah I see from your config you have himem_4G turned on. How much memory
> > do you have? Sii3112 appears (I dont actually have datasheets) to only
> > have 32 bit DMA support, and will use bounce buffers quite a lot of the
> > time if you turn on himem at all, reducing throughput substantially. Try
> > again with no himem support at all and see if it helps.
> 
> I have 1.5 GB. I tried to disable highmem, now less than 1GB is visible, but 
> there is no noticable difference in SATA performance:
> 
> siimage:
> /dev/hde:
>  setting fs readahead to 8129
>  setting 32-bit IO_support flag to 1
>  setting multcount to 16
>  multcount    = 16 (on)
>  IO_support   =  1 (32-bit)
>  unmaskirq    =  0 (off)
>  using_dma    =  1 (on)
>  keepsettings =  0 (off)
>  readonly     =  0 (off)
>  readahead    = 8128 (on)
>  geometry     = 16383/255/63, sectors = 145226112, start = 0
>  Timing buffer-cache reads:   1428 MB in  2.00 seconds = 713.75 MB/sec
>  Timing buffered disk reads:  100 MB in  3.03 seconds =  32.99 MB/sec
> 
> libata
> /dev/sda:
>  setting fs readahead to 8192
>  readahead    = 8192 (on)
>  Timing buffered disk reads:   82 MB in  3.02 seconds =  27.17 MB/sec

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/