AIC7899 SCSI driver problem:DV failed to configure device.

[Shi Jin]

Hi there,

I am having this problem for all the kernels I tried:
2.4.18,2.4.25 and
2.6.3.The message is:
******************begin*********************
 SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER,
Rev 6.2.36
        <Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide
        Channel A, SCSI Id=7, 32/253 SCBs

scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER,
Rev 6.2.36
        <Adaptec aic7899 Ultra160 SCSI adapter>
        aic7899: Ultra160 Wide Channel B, SCSI Id=7,
32/253 SCBs

blk: queue f797b818, I/O limit 4095Mb (mask
0xffffffff)
scsi0:A:0:0: DV failed to configure device.  Please
file a bug report against this driver.
(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT,
offset 31, 16bit)
  Vendor:           Model:                   Rev: 0001
  Type:   Direct-Access                      ANSI SCSI
revision: 03
blk: queue f797b618, I/O limit 4095Mb (mask
0xffffffff)
scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
Attached scsi disk sda at scsi0, channel 0, id 0, lun
0
SCSI device sda: 2578022400 512-byte hdwr sectors
(1319947 MB)
 sda: sda1 sda2 sda3
******************end *************************
The output of lspci -v is
*****************begin********************
00:0a.0 SCSI storage controller: Adaptec AIC-7899P
U160/m (rev 01)
        Subsystem: Tyan Computer: Unknown device 2468
        Flags: bus master, 66Mhz, medium devsel,
latency 72, IRQ 20
        BIST result: 00
        I/O ports at 1000 [disabled] [size=256]
        Memory at f4000000 (64-bit, non-prefetchable)
[size=4K]
        Expansion ROM at <unassigned> [disabled]
[size=128K]
        Capabilities: <available only to root>

00:0a.1 SCSI storage controller: Adaptec AIC-7899P
U160/m (rev 01)
        Subsystem: Tyan Computer: Unknown device 2468
        Flags: bus master, 66Mhz, medium devsel,
latency 72, IRQ 21
        BIST result: 00
        I/O ports at 1400 [disabled] [size=256]
        Memory at f4001000 (64-bit, non-prefetchable)
[size=4K]
        Expansion ROM at <unassigned> [disabled]
[size=128K]
        Capabilities: <available only to root>
******************end************************

An external IDE RAID(level 5) is connected to this
SCSI port.
It is working fine for now being, but I don't know why
the DV failed to
configure error happens. So I report it here.

Please tell me what else information you need.
Thank you very much.

Shi Jin


__________________________________
Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam
http://mail.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/