Re: 2.6.3-mm3 hangs on boot x440 (scsi?)

[Go Taniguchi]

Hi,

Andrew Morton wrote:
> john stultz <johnstul@xxxxxxxxxx> wrote:
>
> > 	Booting 2.6.3-mm3 on an x440 hangs the box during the SCSI probe after
> > the following:
> >
> > scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
> >        <Adaptec aic7899 Ultra160 SCSI adapter>                 
> >        aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
> >                                                                
> >
> > I went back to 2.6.3-mm1 (as it was a smaller diff) and the problem was
> > there as well. 
>
>
> Could you try reverting aic7xxx-deadlock-fix.patch?  Also, add
> initcall_debug to the boot command just so we know we aren't blaming the
> wrong thing.
>
> Apart from that, gosh.  Maybe you could add just linus.patch and
> bk-scsi.patch, see if that hangs too?  Or just test the latest linus tree -
> the scsi changes were merged this morning.  Thanks.

Problem patch is expanded-pci-config-space.patch.
x440 can not enable acpi by dmi_scan.
expanded-pci-config-space.patch need acpi support.
So, kernel can not get x440's xAPIC interrupt.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/