kgdb interdiff for 8250.patch

From: Amit S. Kale
Date: Wed Feb 11 2004 - 09:50:26 EST

Next message: Amit S. Kale: "kgdb interdiff for x86_64.patch"
Previous message: Amit S. Kale: "kgdb interdiff for i386.patch"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

Here is interdiff for file 8250.patch

--- archive/2.1.0/linux-2.6.1-kgdb-2.1.0/8250.patch 2004-01-21
22:03:08.000000000 +0530
+++ cvs/kgdb-2/8250.patch 2004-02-11 16:01:04.000000000 +0530
@@ -1,6 +1,6 @@
-diff -Naurp linux-2.6.1/drivers/serial/8250.c
linux-2.6.1-kgdb-2.1.0-8250/drivers/serial/8250.c
---- linux-2.6.1/drivers/serial/8250.c 2004-01-10 11:01:45.000000000 +0530
-+++ linux-2.6.1-kgdb-2.1.0-8250/drivers/serial/8250.c 2004-01-12
19:10:45.000000000 +0530
+diff -Naurp linux-2.6.2/drivers/serial/8250.c
linux-2.6.2-kgdb-8250/drivers/serial/8250.c
+--- linux-2.6.2/drivers/serial/8250.c 2004-01-10 11:01:45.000000000 +0530
++++ linux-2.6.2-kgdb-8250/drivers/serial/8250.c 2004-02-10 18:49:00.000000000
+0530
@@ -1198,12 +1198,17 @@ static void serial8250_break_ctl(struct
spin_unlock_irqrestore(&up->port.lock, flags);
}
@@ -48,7 +48,7 @@
+ int ttyS;
+
+ if (released_irq != -1) {
-+ return 1;
++ return -EBUSY;
+ }
+ released_irq = irq;
+ for (ttyS = 0; ttyS < UART_NR; ttyS++){
@@ -67,9 +67,9 @@
static int __init serial8250_init(void)
{
int ret, i;
-diff -Naurp linux-2.6.1/drivers/serial/Kconfig
linux-2.6.1-kgdb-2.1.0-8250/drivers/serial/Kconfig
---- linux-2.6.1/drivers/serial/Kconfig 2003-11-24 07:03:13.000000000 +0530
-+++ linux-2.6.1-kgdb-2.1.0-8250/drivers/serial/Kconfig 2004-01-12
19:10:45.000000000 +0530
+diff -Naurp linux-2.6.2/drivers/serial/Kconfig
linux-2.6.2-kgdb-8250/drivers/serial/Kconfig
+--- linux-2.6.2/drivers/serial/Kconfig 2004-02-10 13:01:27.000000000 +0530
++++ linux-2.6.2-kgdb-8250/drivers/serial/Kconfig 2004-02-10
13:10:17.000000000 +0530
@@ -6,6 +6,13 @@

menu "Serial drivers"
@@ -84,10 +84,10 @@
#
# The new 8250/16550 serial drivers
config SERIAL_8250
-diff -Naurp linux-2.6.1/drivers/serial/kgdb_8250.c
linux-2.6.1-kgdb-2.1.0-8250/drivers/serial/kgdb_8250.c
---- linux-2.6.1/drivers/serial/kgdb_8250.c 1970-01-01 05:30:00.000000000
+0530
-+++ linux-2.6.1-kgdb-2.1.0-8250/drivers/serial/kgdb_8250.c 2004-01-17
13:55:58.000000000 +0530
-@@ -0,0 +1,408 @@
+diff -Naurp linux-2.6.2/drivers/serial/kgdb_8250.c
linux-2.6.2-kgdb-8250/drivers/serial/kgdb_8250.c
+--- linux-2.6.2/drivers/serial/kgdb_8250.c 1970-01-01 05:30:00.000000000
+0530
++++ linux-2.6.2-kgdb-8250/drivers/serial/kgdb_8250.c 2004-02-10
18:53:13.000000000 +0530
+@@ -0,0 +1,396 @@
+/*
+ * 8250 interface for kgdb.
+ *
@@ -150,14 +150,11 @@
+static void (*serial_outb)(unsigned char, unsigned long);
+static unsigned long (*serial_inb)(unsigned long);
+
-+extern void set_debug_traps(void) ; /* GDB routine */
+int serial8250_release_irq(int irq);
+
+int kgdb8250_irq;
+unsigned long kgdb8250_port;
+
-+static int initialized = -1;
-+
+int kgdb8250_baud = 115200;
+int kgdb8250_ttyS;
+
@@ -183,35 +180,36 @@
+
+/*
+ * Get a byte from the hardware data buffer and return it
++ * Get a char if available, return -EAGAIN if nothing available.
+ */
+static int read_data_bfr(void)
+{
+ if (serial_inb(kgdb8250_port + UART_LSR) & UART_LSR_DR)
+ return(serial_inb(kgdb8250_port + UART_RX));
+
-+ return( -1 ) ;
-+
++ return -EAGAIN;
+}
+
+/*
-+ * Get a char if available, return -1 if nothing available.
+ * Empty the receive buffer first, then look at the interface hardware.
-+ * It waits for a character from the serial interface and then returns it.
++ * It waits for a character from the serial interface and then returns it.
+ */
+static int kgdb8250_read_char(void)
+{
+ int retchar;
-+ if (atomic_read(&kgdb8250_buf_in_cnt) != 0) /* intr routine has q'd chars
*/
++ if (atomic_read(&kgdb8250_buf_in_cnt) != 0)
+ {
-+ int chr ;
++ /* intr routine has q'd chars read them from buffer */
++ int chr;
+
-+ chr = kgdb8250_buf[kgdb8250_buf_out_inx++] ;
-+ kgdb8250_buf_out_inx &= (GDB_BUF_SIZE - 1) ;
-+ atomic_dec(&kgdb8250_buf_in_cnt) ;
-+ return(chr) ;
++ chr = kgdb8250_buf[kgdb8250_buf_out_inx++];
++ kgdb8250_buf_out_inx &= (GDB_BUF_SIZE - 1);
++ atomic_dec(&kgdb8250_buf_in_cnt);
++ return chr;
+ }
+ do {
-+ retchar = (read_data_bfr()) ; /* read from hardware */
++ /* read from hardware */
++ retchar = read_data_bfr();
+ } while (retchar < 0);
+ return retchar;
+}
@@ -221,11 +219,12 @@
+ */
+static void kgdb8250_write_char(int chr)
+{
-+ while ( !(serial_inb(kgdb8250_port + UART_LSR) & UART_LSR_THRE) ) ;
++ while (!(serial_inb(kgdb8250_port + UART_LSR) & UART_LSR_THRE))
++ /* Do nothing */;
+
+ serial_outb(chr, kgdb8250_port+UART_TX);
+
-+} /* write_char */
++}
+
+/*
+ * This is the receiver interrupt routine for the GDB stub.
@@ -249,7 +248,8 @@
+ * care to learn can make this work for any low level serial
+ * driver.
+ */
-+static irqreturn_t kgdb8250_interrupt(int irq, void *dev_id, struct pt_regs
* regs)
++static irqreturn_t kgdb8250_interrupt(int irq, void *dev_id,
++ struct pt_regs * regs)
+{
+ int chr;
+ int iir;
@@ -311,11 +311,9 @@
+}
+
+/*
-+ * Takes:
++ * Initializes serial port.
+ * ttyS - integer specifying which serial port to use for debugging
+ * baud - baud rate of specified serial port
-+ * Returns:
-+ * port for use by the gdb serial driver
+ */
+static int kgdb8250_init(int ttyS, int baud)
+{
@@ -405,7 +403,7 @@
+ * If we read 0xff from the LSR, there is no UART here.
+ */
+ if (serial_inb(kgdb8250_port + UART_LSR) == 0xff)
-+ return -1;
++ return -ENODEV;
+ return 0;
+}
+
@@ -431,24 +429,16 @@
+ }
+
+#ifdef CONFIG_SERIAL_8250
-+ if (serial8250_release_irq(kgdb8250_irq))
-+ return -1;
++ if ((retval = serial8250_release_irq(kgdb8250_irq)) < 0)
++ return retval;
+#endif
+
-+ if (kgdb8250_init(kgdb8250_ttyS, kgdb8250_baud) == -1)
-+ return -1;
++ if ((retval = kgdb8250_init(kgdb8250_ttyS, kgdb8250_baud)) < 0)
++ return retval;
+
+ retval = request_irq(kgdb8250_irq, kgdb8250_interrupt, SA_INTERRUPT,
+ "GDB-stub", NULL);
-+ if (retval == 0)
-+ initialized = 1;
-+ else
-+ {
-+ initialized = 0;
-+ }
-+
-+ return 0;
-+
++ return retval;
+}
+
+void
@@ -460,7 +450,7 @@
+ rs_table[i].regshift = serial_req->regshift;
+}
+
-+struct kgdb_serial kgdb8250_serial = {
++struct kgdb_serial kgdb8250_serial_driver = {
+ .read_char = kgdb8250_read_char,
+ .write_char = kgdb8250_write_char,
+ .hook = kgdb8250_hook
@@ -485,9 +475,7 @@
+ kgdb8250_baud != 38400 && kgdb8250_baud != 57600 &&
+ kgdb8250_baud != 115200)
+ goto errout;
-+
-+ kgdb_serial = &kgdb8250_serial;
-+
++ kgdb_serial = &kgdb8250_serial_driver;
+ return 1;
+
+errout:
@@ -496,20 +484,20 @@
+}
+
+__setup("kgdb8250=", kgdb8250_opt);
-diff -Naurp linux-2.6.1/drivers/serial/Makefile
linux-2.6.1-kgdb-2.1.0-8250/drivers/serial/Makefile
---- linux-2.6.1/drivers/serial/Makefile 2003-11-24 07:01:55.000000000 +0530
-+++ linux-2.6.1-kgdb-2.1.0-8250/drivers/serial/Makefile 2004-01-12
19:10:45.000000000 +0530
+diff -Naurp linux-2.6.2/drivers/serial/Makefile
linux-2.6.2-kgdb-8250/drivers/serial/Makefile
+--- linux-2.6.2/drivers/serial/Makefile 2003-11-24 07:01:55.000000000 +0530
++++ linux-2.6.2-kgdb-8250/drivers/serial/Makefile 2004-02-10
13:10:17.000000000 +0530
@@ -32,3 +32,5 @@ obj-$(CONFIG_SERIAL_COLDFIRE) += mcfseri
obj-$(CONFIG_V850E_UART) += v850e_uart.o
obj-$(CONFIG_SERIAL98) += serial98.o
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
+
+obj-$(CONFIG_KGDB_8250) += kgdb_8250.o
-diff -Naurp linux-2.6.1/drivers/serial/serial_core.c
linux-2.6.1-kgdb-2.1.0-8250/drivers/serial/serial_core.c
---- linux-2.6.1/drivers/serial/serial_core.c 2004-01-10 11:01:45.000000000
+0530
-+++ linux-2.6.1-kgdb-2.1.0-8250/drivers/serial/serial_core.c 2004-01-12
19:10:45.000000000 +0530
-@@ -1209,7 +1209,11 @@ static void uart_set_termios(struct tty_
- static void uart_close(struct tty_struct *tty, struct file *filp)
+diff -Naurp linux-2.6.2/drivers/serial/serial_core.c
linux-2.6.2-kgdb-8250/drivers/serial/serial_core.c
+--- linux-2.6.2/drivers/serial/serial_core.c 2004-02-10 13:01:27.000000000
+0530
++++ linux-2.6.2-kgdb-8250/drivers/serial/serial_core.c 2004-02-10
13:10:17.000000000 +0530
+@@ -917,7 +917,11 @@ uart_tiocmset(struct tty_struct *tty, st
+ static void uart_break_ctl(struct tty_struct *tty, int break_state)
{
struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->port;
@@ -520,4 +508,4 @@
+ port = state->port;

BUG_ON(!kernel_locked());
- DPRINTK("uart_close(%d) called\n", port->line);
+

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Amit S. Kale: "kgdb interdiff for x86_64.patch"
Previous message: Amit S. Kale: "kgdb interdiff for i386.patch"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]