Re: 2.6.3-rc1-mm1

From: Karl Vogel
Date: Mon Feb 09 2004 - 15:14:02 EST


In article <20040209014035.251b26d1.akpm@xxxxxxxx>, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.3-rc1/2.6.3-rc1-mm1/
>

---- kernel log ---
SCSI subsystem initialized
request_module: failed /sbin/modprobe -- char-major-21-1. error = 256
ohci1394: $Rev: 1097 $ Ben Collins <bcollins@xxxxxxxxxx>
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dffff000-dffff7ff] Max Packet=[2048]
kudzu: numerical sysctl 1 49 is obsolete.
kudzu: numerical sysctl 1 49 is obsolete.
ieee1394: Node added: ID:BUS[0-00:1023] GUID[0010b9f7007a8edf]
ieee1394: Host added: ID:BUS[0-01:1023] GUID[00023c003000f0f2]
Badness in kobject_get at lib/kobject.c:431
Call Trace:
[<c01e5114>] kobject_get+0x44/0x50
[<c022bd7e>] get_device+0xe/0x20
[<c022cb4e>] bus_for_each_dev+0x4e/0xa0
[<e0ae5c60>] nodemgr_host_thread+0x200/0xe30 [ieee1394]
[<e0ae59d0>] nodemgr_probe_ne_cb+0x0/0x90 [ieee1394]
[<c031ed32>] ret_from_fork+0x6/0x14
[<e0ae5a60>] nodemgr_host_thread+0x0/0xe30 [ieee1394]
[<c01085f5>] kernel_thread_helper+0x5/0x10

Unable to handle kernel paging request at virtual address 852cec83
printing eip:
852cec83
*pde = 00000000
Oops: 0000 [#1]
PREEMPT
CPU: 0
EIP: 0060:[<852cec83>] Not tainted VLI
EFLAGS: 00010282
EIP is at 0x852cec83
eax: e0b14b84 ebx: e0b14b84 ecx: e0b14b60 edx: 852cec83
esi: e0ae5720 edi: 00000000 ebp: e0ae4980 esp: df42becc
ds: 007b es: 007b ss: 0068
Process knodemgrd_0 (pid: 354, threadinfo=df42a000 task=df42d7c0)
Stack: c01e52b7 e0b14b60 e0b14b68 e0b14ac0 df311044 c022cb63 e0b14b0c 00000000
df42bf9c df311000 00000000 0000ffc1 de9e4970 e0ae5c60 e0ae59d0 f0000420
0000ffff df42bf98 000003ff 3000f0f2 00023c00 00000008 de9e4958 df42a000
Call Trace:
[<c01e52b7>] kobject_cleanup+0x97/0xa0
[<c022cb63>] bus_for_each_dev+0x63/0xa0
[<e0ae5c60>] nodemgr_host_thread+0x200/0xe30 [ieee1394]
[<e0ae59d0>] nodemgr_probe_ne_cb+0x0/0x90 [ieee1394]
[<c031ed32>] ret_from_fork+0x6/0x14
[<e0ae5a60>] nodemgr_host_thread+0x0/0xe30 [ieee1394]
[<c01085f5>] kernel_thread_helper+0x5/0x10

Code: Bad EIP value.
<6>sbp2: $Rev: 1096 $ Ben Collins <bcollins@xxxxxxxxxx>
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
eth0: link up, 10Mbps, half-duplex, lpa 0x0000

--- IEEE1394 .config settings ---
CONFIG_IEEE1394=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m

Tried both with and without CONFIG_PREEMPT. The IEEE1394 is the onboard
controller of a Creative Labs Audigy I (if that matters). The attached
device is a Maxtor OneTouch diskdrive.

/sys/bus/ieee1394 looks like:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/