[PATCH] 2.6.2: Add user friendliness to highmem= option
From: Michael Frank
Date: Sat Feb 07 2004 - 15:36:38 EST
Andrew,
Enclosed is a patch for x86 to make highmem= option easier to use.
- Automates alignment of highmem zone
- Fixes invalid highmem settings whether too small or to large
- Adds entry in kernel-parameters.txt
Highmem emulation can be used on any machine with at least 72MB RAM.
The patch does not add to bloat as it is part of __init code.
Please consider applying it as it makes this option quite usable
Regards
Michael
no highmem option
0MB HIGHMEM available.
495MB LOWMEM available.
On node 0 totalpages: 126960, zones aligned at: 0x400000
DMA zone: 4096 pages, LIFO batch:1, physical start address at: 0x0
Normal zone: 122864 pages, LIFO batch:16, physical start address at: 0x1000000
highmem=1m
Warning highmem=1MB is too small and has been adjusted to: 8MB.
Warning bad highmem zone alignment 0x3f0000, highmem size will be adjusted.
Warning lowmem size adjusted for zone alignment to: 488MB.
Warning highmem size adjusted for zone alignment to: 7MB.
7MB HIGHMEM available.
488MB LOWMEM available.
On node 0 totalpages: 126960, zones aligned at: 0x400000
DMA zone: 4096 pages, LIFO batch:1, physical start address at: 0x0
Normal zone: 120832 pages, LIFO batch:16, physical start address at: 0x1000000
HighMem zone: 2032 pages, LIFO batch:1, physical start address at: 0x1e800000
highmem=300m
Warning bad highmem zone alignment 0x3f0000, highmem size will be adjusted.
Warning lowmem size adjusted for zone alignment to: 196MB.
Warning highmem size adjusted for zone alignment to: 299MB.
299MB HIGHMEM available.
196MB LOWMEM available.
On node 0 totalpages: 126960, zones aligned at: 0x400000
DMA zone: 4096 pages, LIFO batch:1, physical start address at: 0x0
Normal zone: 46080 pages, LIFO batch:11, physical start address at: 0x1000000
HighMem zone: 76784 pages, LIFO batch:16, physical start address at: 0xc400000
highmem=450m
Warning highmem size adjusted for a minimum of 64MB lowmem to: 431MB.
431MB HIGHMEM available.
64MB LOWMEM available.
On node 0 totalpages: 126960, zones aligned at: 0x400000
DMA zone: 4096 pages, LIFO batch:1, physical start address at: 0x0
Normal zone: 12288 pages, LIFO batch:3, physical start address at: 0x1000000
HighMem zone: 110576 pages, LIFO batch:16, physical start address at: 0x4000000
highmem=5000m
Warning highmem=5000MB is bigger than available 495MB and will be adjusted.
Warning highmem size adjusted for a minimum of 64MB lowmem to: 431MB.
431MB HIGHMEM available.
64MB LOWMEM available.
On node 0 totalpages: 126960, zones aligned at: 0x400000
DMA zone: 4096 pages, LIFO batch:1, physical start address at: 0x0
Normal zone: 12288 pages, LIFO batch:3, physical start address at: 0x1000000
HighMem zone: 110576 pages, LIFO batch:16, physical start address at: 0x4000000
mem=80m highmem=1m
Warning highmem=1MB is too small and has been adjusted to: 8MB.
8MB HIGHMEM available.
72MB LOWMEM available.
On node 0 totalpages: 20480, zones aligned at: 0x400000
DMA zone: 4096 pages, LIFO batch:1, physical start address at: 0x0
Normal zone: 14336 pages, LIFO batch:3, physical start address at: 0x1000000
HighMem zone: 2048 pages, LIFO batch:1, physical start address at: 0x4800000
mem=80m highmem=300m
Warning highmem=300MB is bigger than available 80MB and will be adjusted.
Warning highmem size adjusted for a minimum of 64MB lowmem to: 16MB.
16MB HIGHMEM available.
64MB LOWMEM available.
On node 0 totalpages: 20480, zones aligned at: 0x400000
DMA zone: 4096 pages, LIFO batch:1, physical start address at: 0x0
Normal zone: 12288 pages, LIFO batch:3, physical start address at: 0x1000000
HighMem zone: 4096 pages, LIFO batch:1, physical start address at: 0x4000000
mem=71m highmem=1m
Error highmem support requires at least 72MB but only 71MB are available.
0MB HIGHMEM available.
71MB LOWMEM available.
On node 0 totalpages: 18176, zones aligned at: 0x400000
DMA zone: 4096 pages, LIFO batch:1, physical start address at: 0x0
Normal zone: 14080 pages, LIFO batch:3, physical start address at: 0x1000000
mem=72m highmem=10m
Warning highmem size adjusted for a minimum of 64MB lowmem to: 8MB.
8MB HIGHMEM available.
64MB LOWMEM available.
On node 0 totalpages: 18432, zones aligned at: 0x400000
DMA zone: 4096 pages, LIFO batch:1, physical start address at: 0x0
Normal zone: 12288 pages, LIFO batch:3, physical start address at: 0x1000000
HighMem zone: 2048 pages, LIFO batch:1, physical start address at: 0x4000000
highmem=13m - note this is for testing only ;)
diff -uN -r -X /home/mhf/sys/dont/dontdiff linux-2.6.2-Vanilla/arch/i386/kernel/setup.c linux-2.6.2-mhf177/arch/i386/kernel/setup.c
--- linux-2.6.2-Vanilla/arch/i386/kernel/setup.c 2004-02-06 19:36:54.000000000 +0800
+++ linux-2.6.2-mhf177/arch/i386/kernel/setup.c 2004-02-08 04:07:39.000000000 +0800
@@ -581,9 +581,12 @@
#endif /* CONFIG_ACPI_BOOT */
/*
- * highmem=size forces highmem to be exactly 'size' bytes.
+ * highmem=size forces highmem to be at most 'size' bytes.
* This works even on boxes that have no highmem otherwise.
* This also works to reduce highmem size on bigger boxes.
+ *
+ * Note: highmem sise is adjusted downward for proper zone
+ * alignment of the highmem physical start address.
*/
if (c == ' ' && !memcmp(from, "highmem=", 8))
highmem_pages = memparse(from+8, &from) >> PAGE_SHIFT;
@@ -650,6 +653,11 @@
/*
* Determine low and high memory ranges:
*/
+
+#define ZONE_REQUIRED_PAGE_ALIGNMENT (1UL << (MAX_ORDER-1))
+#define ZONE_REQUIRED_PAGE_ALIGNMENT_MASK (ZONE_REQUIRED_PAGE_ALIGNMENT-1)
+#define PAGES_FOR_64MB (64*1024*1024/PAGE_SIZE)
+
unsigned long __init find_max_low_pfn(void)
{
unsigned long max_low_pfn;
@@ -661,14 +669,16 @@
if (highmem_pages + MAXMEM_PFN < max_pfn)
max_pfn = MAXMEM_PFN + highmem_pages;
if (highmem_pages + MAXMEM_PFN > max_pfn) {
- printk("only %luMB highmem pages available, ignoring highmem size of %uMB.\n", pages_to_mb(max_pfn - MAXMEM_PFN), pages_to_mb(highmem_pages));
- highmem_pages = 0;
+ printk("Warning reducing highmem=%uMB to: %luMB.\n",
+ pages_to_mb(highmem_pages),
+ pages_to_mb((max_pfn - MAXMEM_PFN)));
+ highmem_pages = max_pfn - MAXMEM_PFN;
}
max_low_pfn = MAXMEM_PFN;
#ifndef CONFIG_HIGHMEM
/* Maximum memory usable is what is directly addressable */
- printk(KERN_WARNING "Warning only %ldMB will be used.\n",
- MAXMEM>>20);
+ printk(KERN_WARNING "Warning only %dMB will be used.\n",
+ MAXMEM>>20);
if (max_pfn > MAX_NONPAE_PFN)
printk(KERN_WARNING "Use a PAE enabled kernel.\n");
else
@@ -683,26 +693,61 @@
}
#endif /* !CONFIG_X86_PAE */
#endif /* !CONFIG_HIGHMEM */
- } else {
- if (highmem_pages == -1)
- highmem_pages = 0;
+ } else if (highmem_pages == -1)
+ highmem_pages = 0;
#ifdef CONFIG_HIGHMEM
- if (highmem_pages >= max_pfn) {
- printk(KERN_ERR "highmem size specified (%uMB) is bigger than pages available (%luMB)!.\n", pages_to_mb(highmem_pages), pages_to_mb(max_pfn));
- highmem_pages = 0;
- }
- if (highmem_pages) {
- if (max_low_pfn-highmem_pages < 64*1024*1024/PAGE_SIZE){
- printk(KERN_ERR "highmem size %uMB results in smaller than 64MB lowmem, ignoring it.\n", pages_to_mb(highmem_pages));
- highmem_pages = 0;
- }
- max_low_pfn -= highmem_pages;
- }
+ if (!highmem_pages)
+ goto out;
+ if (max_pfn < PAGES_FOR_64MB + ZONE_REQUIRED_PAGE_ALIGNMENT * 2) {
+ printk(KERN_ERR
+ "Error highmem support requires at least %luMB but only %luMB are available.\n",
+ pages_to_mb(PAGES_FOR_64MB + ZONE_REQUIRED_PAGE_ALIGNMENT * 2),
+ pages_to_mb(max_pfn));
+ highmem_pages = 0;
+ goto out;
+ }
+ if (highmem_pages > max_pfn) {
+ printk(KERN_WARNING
+ "Warning highmem=%uMB is bigger than available %luMB and will be adjusted.\n",
+ pages_to_mb(highmem_pages), pages_to_mb(max_pfn));
+ }
+ if (highmem_pages <= ZONE_REQUIRED_PAGE_ALIGNMENT) {
+ printk(KERN_WARNING
+ "Warning highmem=%uMB is too small and has been adjusted to: %luMB.\n",
+ pages_to_mb(highmem_pages),
+ pages_to_mb(ZONE_REQUIRED_PAGE_ALIGNMENT * 2));
+ highmem_pages = ZONE_REQUIRED_PAGE_ALIGNMENT * 2;
+ }
+ if (max_low_pfn < highmem_pages || max_low_pfn-highmem_pages < PAGES_FOR_64MB){
+ highmem_pages = max_low_pfn - PAGES_FOR_64MB;
+ printk(KERN_WARNING
+ "Warning highmem size adjusted for a minimum of 64MB lowmem to: %uMB.\n",
+ pages_to_mb(highmem_pages));
+ }
+ max_low_pfn -= highmem_pages;
+ goto out;
+ /* remove this when done testing bad zone alignment kernel shutdown: end */
+
+ if (max_low_pfn & ZONE_REQUIRED_PAGE_ALIGNMENT_MASK) {
+ printk(KERN_WARNING
+ "Warning bad highmem zone alignment 0x%lx, highmem size will be adjusted.\n",
+ (max_low_pfn & ZONE_REQUIRED_PAGE_ALIGNMENT_MASK) << PAGE_SHIFT);
+ highmem_pages -= ZONE_REQUIRED_PAGE_ALIGNMENT -
+ (max_low_pfn & ZONE_REQUIRED_PAGE_ALIGNMENT_MASK);
+ max_low_pfn &= ~ZONE_REQUIRED_PAGE_ALIGNMENT_MASK;
+ max_low_pfn += ZONE_REQUIRED_PAGE_ALIGNMENT;
+ printk(KERN_WARNING
+ "Warning lowmem size adjusted for zone alignment to: %luMB.\n",
+ pages_to_mb(max_low_pfn));
+ printk(KERN_WARNING
+ "Warning highmem size adjusted for zone alignment to: %uMB.\n",
+ pages_to_mb(highmem_pages));
+ }
#else
- if (highmem_pages)
- printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n");
+ if (highmem_pages)
+ printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n");
#endif
- }
+out:
return max_low_pfn;
}
diff -uN -r -X /home/mhf/sys/dont/dontdiff linux-2.6.2-Vanilla/Documentation/kernel-parameters.txt linux-2.6.2-mhf177/Documentation/kernel-parameters.txt
--- linux-2.6.2-Vanilla/Documentation/kernel-parameters.txt 2004-02-06 19:36:53.000000000 +0800
+++ linux-2.6.2-mhf177/Documentation/kernel-parameters.txt 2004-02-08 03:17:40.000000000 +0800
@@ -387,6 +387,14 @@
hd?= [HW] (E)IDE subsystem
hd?lun= See Documentation/ide.txt.
+ highmem=size[KMG] [IA32,KNL,BOOT] forces highmem to be at most 'size' bytes.
+ This works even on boxes with at least 72MB RAM that have no
+ highmem otherwise. This also works to reduce highmem size on
+ bigger boxes.
+
+ Note: highmem is adjusted downward for proper zone alignment
+ of the highmem physical start address
+
hisax= [HW,ISDN]
See Documentation/isdn/README.HiSax.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/