Re: [ACPI] acpi problem with nforce motherboards and ethernet

[Prakash K. Cheemplavam]

Arjen Verweij wrote:
> It would probably be more useful if I included the URL as well duh... 
(thx
> Craig)
>
> http://atlas.et.tudelft.nl/verwei90/nforce2/
> http://atlas.et.tudelft.nl/verwei90/nforce2/index.html

    * 3.2 Turning off the CPU bus disconnect in the BIOS? (verify) 
(drawback: causes cpu to run significantly hotter)

Inprecice: CPU runs as hot as without disconnect, only without load, cpu 
disconnect lets the cpu cool down.

With athcool you can alsao turn it off, or there is a quirk-patch 
available from Bart.

    * 3.3 Apply patches cooked up by Ross Dickson, possibly in 
conjunction with 3.2? (verify)
          o 3.3.1 Seems to work for Craig Bradney (hardware unknown, 
some Asus board?) and Prakash K. Cheemplavam (Abit NF7-S)

I have Rev2 (2.0) board and d22 (or 2.2 ? Abit has a strange way of 
numbering.) Bios. I only applied first patch. I already use an 
equivalent to the second one.

Prakash
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/