Re: e1000 in 2.6.1-mm1 -- still broken?

[Andrew Morton]

Eric Whiting <ewhiting@xxxxxxxx> wrote:
>
> 
> I'm having trouble with e1000 in -mm1. (works in 2.6.1) The device is detected
> and shows up and can be configured, but nothing ever goes out on the wire. 

Hum, OK.  We'd better Cc the maintainers.


> Here is the device info:
> 
> 
> 07:01.1 Ethernet controller: Intel Corporation: Unknown device 1010 (rev 01)
>         Subsystem: Intel Corporation: Unknown device 1011
>         Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 49
>         Memory at fe9e0000 (64-bit, non-prefetchable) [size=128K]
>         I/O ports at dc00 [size=64]
>         Capabilities: [dc] Power Management version 2
>         Capabilities: [e4] PCI-X non-bridge device.
>         Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0
> Enable-
> 
> 
> tcpdump shows no activity when I attempt to use the e1000 interface.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/