Re: Slow receive with AX8817 USB2 ethernet adapter

[Måns Rullgård]

mru@xxxxxx (Måns Rullgård) writes:

> I'm getting very bad receive rates with a Netgear FA-120 USB2 Ethernet
> adapter under Linux 2.6.0.  Timing an incoming TCP stream, I get only
> 600 kB/s.  Sending works properly at 10 MB/s.  I first reported this
> problem some time in July or August.  Is it just me having this issue?
> Can I get any helpful information somehow?

I can add that mii-tool reports this:

eth0: negotiated 100baseTx-FD flow-control, link ok
  product info: vendor 00:00:20, model 32 rev 1
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
  link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control

-- 
Måns Rullgård
mru@xxxxxx

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/