[PATCH] Update : Silicon Image 3114, 4 ports support

[Mickael Marchand]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi,

Thanks to the info Brian provided, I was able to set up the 4 ports of the 
sil3114.
Attached is the patch for sata_sil.c, tested on a 2.6.1-rc1-mm1 and tested by 
Brian too.

I used 
if (ent->driver_data == sil_3114)   { ... }

to ensure the 4 ports are probed only for sil3114 , I am not sure this is the 
correct way to do it (so that sil3112 support is not broken). I guess Jeff 
will review that :)

Cheers,
Mik
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQE/+BFcyOYzc4nQ8j0RAttHAJ4gUBQt6tgTQp4m2pxBhGq+y2tqwgCbBRPU
p9u5AR+f22MEqlB5kxhM/zc=
=jPSE
-----END PGP SIGNATURE-----
--- sata_sil.c.orig	2004-01-03 12:23:37.000000000 +0100
+++ sata_sil.c	2004-01-04 13:51:28.000000000 +0100
@@ -39,6 +39,7 @@
 
 enum {
 	sil_3112		= 0,
+	sil_3114		= 1,
 
 	SIL_IDE0_TF		= 0x80,
 	SIL_IDE0_CTL		= 0x8A,
@@ -49,6 +50,16 @@
 	SIL_IDE1_CTL		= 0xCA,
 	SIL_IDE1_BMDMA		= 0x08,
 	SIL_IDE1_SCR		= 0x180,
+
+	SIL_IDE2_TF		= 0x280,
+	SIL_IDE2_CTL		= 0x28A,
+	SIL_IDE2_BMDMA		= 0x200,
+	SIL_IDE2_SCR		= 0x300,
+
+	SIL_IDE3_TF		= 0x2C0,
+	SIL_IDE3_CTL		= 0x2CA,
+	SIL_IDE3_BMDMA		= 0x208,
+	SIL_IDE3_SCR		= 0x380,
 };
 
 static void sil_set_piomode (struct ata_port *ap, struct ata_device *adev,
@@ -62,6 +73,7 @@
 
 static struct pci_device_id sil_pci_tbl[] = {
 	{ 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+	{ 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
 	{ }	/* terminate list */
 };
 
@@ -120,6 +132,14 @@
 		.pio_mask	= 0x03,			/* pio3-4 */
 		.udma_mask	= 0x7f,			/* udma0-6; FIXME */
 		.port_ops	= &sil_ops,
+	}, /* sil_3114 */
+	{
+		.sht		= &sil_sht,
+		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_SRST | ATA_FLAG_MMIO,
+		.pio_mask	= 0x03,			/* pio3-4 */
+		.udma_mask	= 0x7f,			/* udma0-6; FIXME */
+		.port_ops	= &sil_ops,
 	},
 };
 
@@ -267,7 +287,7 @@
 	probe_ent->pdev = pdev;
 	probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops;
 	probe_ent->sht = sil_port_info[ent->driver_data].sht;
-	probe_ent->n_ports = 2;
+	probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2; //4 ports for a sil_3114
 	probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask;
 	probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask;
        	probe_ent->irq = pdev->irq;
@@ -296,6 +316,20 @@
 	probe_ent->port[1].scr_addr = base + SIL_IDE1_SCR;
 	ata_std_ports(&probe_ent->port[1]);
 
+	if (ent->driver_data == sil_3114) {
+		probe_ent->port[2].cmd_addr = base + SIL_IDE2_TF;
+		probe_ent->port[2].ctl_addr = base + SIL_IDE2_CTL;
+		probe_ent->port[2].bmdma_addr = base + SIL_IDE2_BMDMA;
+		probe_ent->port[2].scr_addr = base + SIL_IDE2_SCR;
+		ata_std_ports(&probe_ent->port[2]);
+
+		probe_ent->port[3].cmd_addr = base + SIL_IDE3_TF;
+		probe_ent->port[3].ctl_addr = base + SIL_IDE3_CTL;
+		probe_ent->port[3].bmdma_addr = base + SIL_IDE3_BMDMA;
+		probe_ent->port[3].scr_addr = base + SIL_IDE3_SCR;
+		ata_std_ports(&probe_ent->port[3]);
+	}
+
 	pci_set_master(pdev);
 
 	/* FIXME: check ata_device_add return value */