Re: [PATCH] 2.6.0 - Watchdog patches (BK consistency checks)

[Ed Tomlinson]

On December 30, 2003 03:16 pm, Andy Isaacson wrote:
> On Tue, Dec 30, 2003 at 12:56:32PM -0700, Eric D. Mudama wrote:
> > On Tue, Dec 30 at 13:13, Andy Isaacson wrote:
> > >On Tue, Dec 30, 2003 at 08:36:15AM -0500, Ed Tomlinson wrote:
> > >The consistency check definitely should not take 15 minutes.  It should
> > >be (much) less than 30 seconds.  What is the hardware you're running on?
> > >
> > >I'm running on an Athlon 2 GHz (XP 2400+) with 512MB and a 7200RPM IDE
> > >disk, and I can do a complete clone (with full data copy and consistency
> > >check) of the 2.4 tree in 1:40.  That was with cold caches; with the
> > >sfile copies and "checkout:get", a half-gig isn't enough to cache
> > >everything.  The consistency check is about 19 seconds (bk -r check
> > > -acv).
> >
> > For what it is worth:
> >
> > AMD Duron 950MHz, 768MB RAM
> > 7200RPM 80GB Quantum Viper IDE drive, 26% full
> >
> > phat-penguin:~/src/linux-2.5> time bk -r check -acv
> > 100% |=================================================================|
> > OK 42.710u 5.770s 2:04.63 38.8%    0+0k 0+0io 74078pf+0w
> >
> > over 2 minutes of wall time, 42 seconds of "user" time... (if I'm reading
> > it right), without primed disk caches.
> >
> > The 2nd run, half a minute later:
> >
> > phat-penguin:~/src/linux-2.5> time bk -r check -acv
> > 100% |=================================================================|
> > OK 41.900u 3.080s 0:45.53 98.7%    0+0k 0+0io 74078pf+0w
> >
> >
> > ...would appear to show that BK's checksumming, on my system, is
> > constrained near 41 seconds of calculation time, and the difference
> > between the user and the wall-clock time is basically time spent
> > waiting for the disk to do all its reads.
> >
> >
> > I guess in that case, it'd be interesting to see what the user and
> > wall times were for the original poster who reported a 15+ minute
> > integrity check.
>
> That's basically right, except that if you don't have enough memory to
> keep bk's working set in memory, then you're paging and performance
> starts to suck.
>
> I didn't realize that the cpu-bound portion of the check would scale so
> closely with CPU speed, but it looks like the scaling is almost dead-on;
> 18.4/41.9 = .439
> 950/2000  = .475
>
> So I was wrong to say "less than 30 seconds".  "If you have a fast CPU
> and enough memory", I guess.  But the memory matters a lot more than the
> CPU.

Here are the numbers from my box:

oscar% cd /usr/src/linux
oscar% time bk -r check -acv
100% |=================================================================| OK
bk -r check -acv  80.63s user 16.18s system 21% cpu 7:32.06 total

oscar% time bk clone -ql linux yy
bk clone -ql linux yy  77.57s user 23.49s system 17% cpu 9:50.51 total

Ed

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/