Re: Is it safe to ignore UDMA BadCRC errors?

[Florian Schuele]

On 29.12.03 12:52 -0700, Eric D. Mudama wrote:

> On Mon, Dec 29 at 11:07, Jonathan Kamens wrote:
> >The topic of CRC errrors from IDE drives has been discussed numerous
> >times on this list, and I've reviewed those discussions, but I'm still
> >not 100% certain of the answer to this question: Is it safe for me to
> >ignore occasional CRC errors from my drive?
> >
> >Here are the details....
> >
> >The errors look like this:
> >
> > hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> > hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
> >
> >They don't seem to happen often enough to convince the kernel to back
> >down to a slower UDMA mode.
> 
> 0x5184 is the error code for when the drive sends you data that was
> corrupted during transmission over the cable.  In general, nothing is
> wrong with your drive, and a re-read from the drive will almost always
> produce the proper data.
> 
> Odds are your cable is bad, regardless of how "good" it looks, you
> really can't tell if you have marginal conductivity on a pin or
> something else wierd.  In my home system I replace the IDE cables
> every few years, on my test box at work I replace them every month
> since I'm doing lots of re-plugging of drives. Note that a bad cable
> is *dangerous* to your filesystem, since a PIO transfer to the drive
> has *no* integrity checking on the cable!
> 
> Also, those "round" cables violate the ATA spec, I can't really
> recommend using them unless airflow is your #1 concern, however in
> that case you're probably better off buying a SATA drive.
> 
> Generic IDE ribbon cables (between 6" and 18") seem to work fine for
> most people, just go buy another $2 cable from CompUSA and see if the
> problem goes away.
> 
> FYI, UDMA4 isn't that fast, only 66MB/sec... "good" (functional, not
> brand name) flat cables should be able to do 100MB sec trivially.

i wrote a mail to this list a few days ago.
i have the same error messages as the above.
but _only_ with kernel 2.6.0, _not_ with 2.4.20 ...
thats strange. isnt it?
after i little traffic on the hd`s the system freezes.

-- 

florian schuele
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/