Re: kernel 2.6.0 compilation help

From: Stef van der Made
Date: Tue Dec 23 2003 - 10:57:54 EST



Dear Muhammad,

I think that you need to set this option

CONFIG_BLK_DEV_SD=m to Y and your problem should be solved. The kernel now doesn't know scsi disks (in menuconfig SCSI disk support)

Best regards,

Stef


Muhammad Talha wrote:

Dear all

i have Red Hat 9 i am trying to install kernel 2.6.0 . kernel seems to
compiled ok but does not boot
give following error at boot all drive are detected before boot.

module-init-tools 0.9.9 installed
ext3 filesystem support was build in the kernel
aslo /dev file system support buildin
my root parttion is /dev/sda1 ( ext3)
my .config

http://mail.magic.net.pk/kernel/.config


Error Message ##

VFS: Cannot open root device "sda1" or unknown-block(0,0)
Please append a correct "root="boot option
Kernel Panic : VFS Uanble to mount root fs on unknown-block(0,0)

i have following Hardware

Intel Entry level Server motherboard
Pentitum III 1266 MHz processor
2 GB RAM
3 SCSI hard drive
no ide drive

i have tried many time with different option but with no luck

Thanks waiting for your reply

Talha

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/