Re: [2.6.0-test9-mm2] Error trying to read a cdrom disc

[Ramón Rey Vicente]

Sorry, the info about my ide controller
-- 
Ramón Rey Vicente       <ramon dot rey at hispalinux dot es>
        jabber ID       <rreylinux at jabber dot org>
GPG public key ID 	0xBEBD71D5 -> http://pgp.escomposlinux.org/
----------VIA BusMastering IDE Configuration----------------
Driver Version:                     3.38
South Bridge:                       VIA vt82c586b
Revision:                           ISA 0x47 IDE 0x6
Highest DMA rate:                   UDMA33
BM-DMA base:                        0xe000
PCI clock:                          33.3MHz
Master Read  Cycle IRDY:            1ws
Master Write Cycle IRDY:            1ws
BM IDE Status Register Read Retry:  yes
Max DRDY Pulse Width:               No limit
-----------------------Primary IDE-------Secondary IDE------
Read DMA FIFO flush:          yes                 yes
End Sector FIFO flush:         no                  no
Prefetch Buffer:              yes                 yes
Post Write Buffer:            yes                  no
Enabled:                      yes                 yes
Simplex only:                  no                  no
Cable Type:                   40w                 40w
-------------------drive0----drive1----drive2----drive3-----
Transfer Mode:       UDMA      UDMA       PIO       DMA
Address Setup:       30ns      30ns      30ns      30ns
Cmd Active:          90ns      90ns      90ns      90ns
Cmd Recovery:        30ns      30ns      30ns      30ns
Data Active:         90ns      90ns      90ns      90ns
Data Recovery:       30ns      30ns      30ns      30ns
Cycle Time:          60ns      60ns     120ns     120ns
Transfer Rate:   33.3MB/s  33.3MB/s  16.6MB/s  16.6MB/s

Attachment: signature.asc
Description: Esta parte del mensaje =?ISO-8859-1?Q?est=E1?= firmadadigitalmente