Re: I/O issues, iowait problems, 2.4 v 2.6

[Paul Venezia]

> 
> Well that's nice and simple.  Could you please run `vmstat 1' during that
> big `dd'?  Wait for everything to achieve steady state, send us twenty
> lines of the vmstat trace?

I'd pulled this before, here's the output.

> > 
> >  I'd done bonnie++ i/o tests already, and except for an apparent NPTL issue on the per char,
> >  the block i/o numbers were fine; no abnormal results whatsoever. In fact, block r/w
> >  numbers were improved compared to 2.4.22. Now that I'm looking for it, however, I 
> >  do note extremely elevated iowait numbers during a bonnie++ run. Something in the MPT
> >  modules?
> 
> Greater than 90% I/O wait is to be expected in these tests.  What is of
> interest is the overall bandwidth.2.5 megabytes per second is very broken.

Definitely. I should have noted that the 2.4.22 tests on that dd came
back in 23.607s, the 2.6.0 tests hadn't returned for over 4 minutes.

> 2.5 megabytes per second is very
> broken.  I have a 53c1030 box here which uses the MPT fusion driver and it
> happily does 50MB/sec to a single disk, but I guess that's a different
> setup.

This is a 53C1030 with a RAID1 mirror. Now that I think about it, I did
the >2GB bonnie tests on a single disk, no mirror. I'll rerun the i/o
tests with this setup and then remove the mirror and see what happens.

-Paul

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/