Re: HighPoint 374

[Måns Rullgård]

"Tomi Orava" <Tomi.Orava@xxxxxxxxxxxxxxxxxx> writes:

>> I'm using a RocketRAID 1540 SATA card (hpt374 based) in an Alpha
>> system.  It has no such thing as ACPI.  The disks are four Seagate
>> Barracuda 7200.7 running software raid5.  My /proc/interrupts:
>
> Ok, that might be one reason why it's working for you but not for me.
> If I've understood correctly, people who have problems with HPT374
> are using the integrated Parallel-ATA interface instead of SATA.

The chip on the SATA controller is the same as the PATA version.  The
SATA interface is handled by external bridge chips.  I don't really
see how it would make any difference if the hpt374 is on a PCI board
on on the motherboard.  The Alpha system is quite different from your
average PC in some ways, though.  That could explain some differences.

-- 
Måns Rullgård
mru@xxxxxxxxxxxx

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/