Re: via-rhine on 2.4.23-pre6 Too much work at interrupt, status=0x00001000.(fwd)

[Jeff Garzik]

> Date: Thu, 16 Oct 2003 12:27:17 -0700
> From: John Wong <kernel@xxxxxxxxxxx>
> To: linux-kernel@xxxxxxxxxxxxxxx
> Subject: via-rhine on 2.4.23-pre6 Too much work at interrupt,
>      status=0x00001000.
>
> The system used to run 2.4.22 and did not have this too much work
> problem.  There were some other hardware changes.  The system used to be
> a Pentium 100 on a Triton 430FX chipset Intel Advanced/EV board.  Now it 
> is a K6 2 - 500 on a Via Apollo MVP3 chipset on FIC VA-503+ board.
> The NIC stayed the same.  The kernel was recompiled and ACPI was
> enabled.
>
> I noticed in 2.4.23-pre2 -> pre3
> 	 [netdrvr] sync with 2.5: epic100, fealnx, via-rhine, winbond-840


This cset contains no functional via-rhine changes...  First thing to do 
would be try to 2.4.23-pre2.  But my main suspect would be ACPI.

	Jeff


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/