Re: Vortex full-duplex doesn't work?

[Randy.Dunlap]

On Tue, 14 Oct 2003 23:09:23 +0200 Karel Kulhavý <clock@xxxxxxxxxxxxx> wrote:

| > | Hello
| > | 
| > | I have collected from tidbits of information that
| > | ether=0,0,0x201,0,eth0 should set my 3c900 card to full duplex AUI.
| > | 
| > | I have tried this, then ifconfig eth0 up and then
| > | vortex-diag -vv and it still reports MAC Settings: half-duplex
| > | 
| > | When I rewrite all occurences of full_duplex in 3c59x.c for hard-coded
| > | "1", then I get MAC Settings: full-duplex
| > | 
| > | How do I set up this driver to force full-duplex AUI for 3c900 network
| > | card without using modules and without patching 3c59x.c?
| > 
| > BTW, what kernel version ???
| 
| 2.4.22
| 
| > As I indicated in another reply to you, <quote>
| > Please try this, although I'm not yet convinced that the 3c59x
| > driver calls all of the right hooks for this to work.
| > but good luck, and please report back on it. </quote>
| 
| So the only possibility apart from introducing modules is hacking it up in the
| driver?

Yes, I believe so.

| I tried the 3Com setup DOS diskette and it refuses to set full duplex
| together with AUI.

That makes sense.  Fdx requires 2 copper wire pairs.  AUI is a shared
wire medium.

--
~Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/