problems with scsi disk, scsi generic, and compact flash reader

[Chris Friesen]

I have a 2.6.0-test6 kernel with the jumpshot card reader.  I can
compile the generic scsi driver no problem, and when I insert the flash
card I get the following log entry:

Oct  9 20:33:30 doug kernel: hub 2-1:1.0: new USB device on port 2,
assigned address 4
Oct  9 20:33:30 doug kernel: scsi1 : SCSI emulation for USB Mass Storage
devices
Oct  9 20:33:30 doug kernel:   Vendor: Lexar     Model: Jumpshot USB CF
  Rev: 0001
Oct  9 20:33:30 doug kernel:   Type:   Direct-Access
  ANSI SCSI revision: 02
Oct  9 20:33:30 doug kernel: Attached scsi generic sg1 at scsi1, channel
0, id 0, lun 0,  type 0


When I try and load the sd_mod module, that terminal just simply freezes
and I can't break out.  Similarly, if I compile scsi disk support right
into the kernel, it sits forever at boot time.  I have the following
options set in my .config.

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y


Any ideas what's going on?

Thanks,
Chris


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/