Re: irq 12: nobody cared! (2.6.0-test6)

[Andreas Schwarz]

Felipe Alfaro Solana wrote:
> On Mon, 2003-09-29 at 08:56, Meelis Roos wrote:
>> This is Linux 2.6.0-test6 on a PC with VIA KT133A chipset (MSI MS-6330
>> mainboard), PS/2 keyboard, USB mouse. In test5 it hung on boot just
>> after printing
>> mice: PS/2 mouse device common for all mice
>> input: PC Speaker
>> 
>> In 2.6.0-test6, it spits out several "irq 12: nobody cared!" messages
>> with backtraces and then continues as if nothing happened. The system
>> works fine, PS/2 keyboard and USB mouse both work too. Similar
>> configuration (PS/2 keyboard + USB mouse) works fine on an i815 chipset
>> computer.
>
> Have you tried with 2.6.0-test6-mm1? It includes a fix for ACPI PCI
> routing which may help in your case.

I get the following message at boot with 2.6.0-test6-mm1:
=========================================================

irq 12: nobody cared!
Call Trace:
 [<c010b6ca>] __report_bad_irq+0x2a/0x90
 [<c010b7c0>] note_interrupt+0x70/0xb0
 [<c010bab0>] do_IRQ+0x130/0x140
 [<c0109c88>] common_interrupt+0x18/0x20
 [<c0120b90>] do_softirq+0x40/0xa0
 [<c010ba86>] do_IRQ+0x106/0x140
 [<c0109c88>] common_interrupt+0x18/0x20
 [<c010c03e>] setup_irq+0x9e/0xf0
 [<c027c5e0>] i8042_interrupt+0x0/0x190
 [<c010bb68>] request_irq+0xa8/0xe0
 [<c03c5e3d>] i8042_check_mux+0x3d/0x170
 [<c027c5e0>] i8042_interrupt+0x0/0x190
 [<c03c63a5>] i8042_init+0x115/0x150
 [<c03ae74c>] do_initcalls+0x2c/0xa0
 [<c012ca8f>] init_workqueues+0xf/0x30
 [<c01050d2>] init+0x32/0x140
 [<c01050a0>] init+0x0/0x140
 [<c0107149>] kernel_thread_helper+0x5/0xc

handlers:
[<c027c5e0>] (i8042_interrupt+0x0/0x190)
Disabling IRQ #12
irq 12: nobody cared!
Call Trace:
 [<c010b6ca>] __report_bad_irq+0x2a/0x90
 [<c010b7c0>] note_interrupt+0x70/0xb0
 [<c010bab0>] do_IRQ+0x130/0x140
 [<c0109c88>] common_interrupt+0x18/0x20
 [<c0120b90>] do_softirq+0x40/0xa0
 [<c010ba86>] do_IRQ+0x106/0x140
 [<c0109c88>] common_interrupt+0x18/0x20
 [<c010c03e>] setup_irq+0x9e/0xf0
 [<c027c5e0>] i8042_interrupt+0x0/0x190
 [<c010bb68>] request_irq+0xa8/0xe0
 [<c03c5fa5>] i8042_check_aux+0x35/0x160
 [<c027c5e0>] i8042_interrupt+0x0/0x190
 [<c03c637c>] i8042_init+0xec/0x150
 [<c03ae74c>] do_initcalls+0x2c/0xa0
 [<c012ca8f>] init_workqueues+0xf/0x30
 [<c01050d2>] init+0x32/0x140
 [<c01050a0>] init+0x0/0x140
 [<c0107149>] kernel_thread_helper+0x5/0xc

handlers:
[<c027c5e0>] (i8042_interrupt+0x0/0x190)
Disabling IRQ #12

-- 
AVR-Tutorial, über 350 Links
Forum für AVRGCC und MSPGCC
-> http://www.mikrocontroller.net

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/