[PATCH 4/8] Add touchpad support to mousedev.c.
From: Vojtech Pavlik
Date: Thu Sep 25 2003 - 12:02:53 EST
You can pull this changeset from:
bk://kernel.bkbits.net/vojtech/input
===================================================================
ChangeSet@xxxxxx, 2003-09-25 18:22:01+02:00, petero2@xxxxxxxxx
input: Tidy up events reported by a Synaptics pad, add touchpad
support to mousedev.
drivers/input/mouse/synaptics.c | 68 ++++++++++++++++-----------
drivers/input/mousedev.c | 100 +++++++++++++++++++++++++++++-----------
include/linux/input.h | 3 +
3 files changed, 118 insertions(+), 53 deletions(-)
===================================================================
diff -Nru a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
--- a/drivers/input/mouse/synaptics.c Thu Sep 25 18:37:28 2003
+++ b/drivers/input/mouse/synaptics.c Thu Sep 25 18:37:28 2003
@@ -28,6 +28,16 @@
#include "psmouse.h"
#include "synaptics.h"
+/*
+ * The x/y limits are taken from the Synaptics TouchPad interfacing Guide,
+ * section 2.3.2, which says that they should be valid regardless of the
+ * actual size of the sensor.
+ */
+#define XMIN_NOMINAL 1472
+#define XMAX_NOMINAL 5472
+#define YMIN_NOMINAL 1408
+#define YMAX_NOMINAL 4448
+
/*****************************************************************************
* Synaptics communications functions
****************************************************************************/
@@ -316,20 +326,17 @@
static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
{
- /*
- * The x/y limits are taken from the Synaptics TouchPad interfacing Guide,
- * which says that they should be valid regardless of the actual size of
- * the sensor.
- */
set_bit(EV_ABS, dev->evbit);
- set_abs_params(dev, ABS_X, 1472, 5472, 0, 0);
- set_abs_params(dev, ABS_Y, 1408, 4448, 0, 0);
+ set_abs_params(dev, ABS_X, XMIN_NOMINAL, XMAX_NOMINAL, 0, 0);
+ set_abs_params(dev, ABS_Y, YMIN_NOMINAL, YMAX_NOMINAL, 0, 0);
set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
-
- set_bit(EV_MSC, dev->evbit);
- set_bit(MSC_GESTURE, dev->mscbit);
+ set_bit(ABS_TOOL_WIDTH, dev->absbit);
set_bit(EV_KEY, dev->evbit);
+ set_bit(BTN_TOOL_FINGER, dev->keybit);
+ set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
+ set_bit(BTN_TOOL_TRIPLETAP, dev->keybit);
+
set_bit(BTN_LEFT, dev->keybit);
set_bit(BTN_RIGHT, dev->keybit);
set_bit(BTN_FORWARD, dev->keybit);
@@ -489,42 +496,49 @@
struct input_dev *dev = &psmouse->dev;
struct synaptics_data *priv = psmouse->private;
struct synaptics_hw_state hw;
+ int num_fingers;
+ int finger_width;
synaptics_parse_hw_state(psmouse->packet, priv, &hw);
if (hw.z > 0) {
- int w_ok = 0;
- /*
- * Use capability bits to decide if the w value is valid.
- * If not, set it to 5, which corresponds to a finger of
- * normal width.
- */
+ num_fingers = 1;
+ finger_width = 5;
if (SYN_CAP_EXTENDED(priv->capabilities)) {
switch (hw.w) {
case 0 ... 1:
- w_ok = SYN_CAP_MULTIFINGER(priv->capabilities);
+ if (SYN_CAP_MULTIFINGER(priv->capabilities))
+ num_fingers = hw.w + 2;
break;
case 2:
- w_ok = SYN_MODEL_PEN(priv->model_id);
+ if (SYN_MODEL_PEN(priv->model_id))
+ ; /* Nothing, treat a pen as a single finger */
break;
case 4 ... 15:
- w_ok = SYN_CAP_PALMDETECT(priv->capabilities);
+ if (SYN_CAP_PALMDETECT(priv->capabilities))
+ finger_width = hw.w;
break;
}
}
- if (!w_ok)
- hw.w = 5;
+ } else {
+ num_fingers = 0;
+ finger_width = 0;
}
/* Post events */
- input_report_abs(dev, ABS_X, hw.x);
- input_report_abs(dev, ABS_Y, hw.y);
+ if (hw.z > 0) {
+ input_report_abs(dev, ABS_X, hw.x);
+ if (SYN_MODEL_ROT180(priv->model_id))
+ input_report_abs(dev, ABS_Y, YMAX_NOMINAL + YMIN_NOMINAL - hw.y);
+ else
+ input_report_abs(dev, ABS_Y, hw.y);
+ }
input_report_abs(dev, ABS_PRESSURE, hw.z);
- if (hw.w != priv->old_w) {
- input_event(dev, EV_MSC, MSC_GESTURE, hw.w);
- priv->old_w = hw.w;
- }
+ input_report_abs(dev, ABS_TOOL_WIDTH, finger_width);
+ input_report_key(dev, BTN_TOOL_FINGER, num_fingers == 1);
+ input_report_key(dev, BTN_TOOL_DOUBLETAP, num_fingers == 2);
+ input_report_key(dev, BTN_TOOL_TRIPLETAP, num_fingers == 3);
input_report_key(dev, BTN_LEFT, hw.left);
input_report_key(dev, BTN_RIGHT, hw.right);
diff -Nru a/drivers/input/mousedev.c b/drivers/input/mousedev.c
--- a/drivers/input/mousedev.c Thu Sep 25 18:37:28 2003
+++ b/drivers/input/mousedev.c Thu Sep 25 18:37:28 2003
@@ -58,6 +58,7 @@
unsigned long buttons;
unsigned char ready, buffer, bufsiz;
unsigned char mode, imexseq, impsseq;
+ int finger;
};
#define MOUSEDEV_SEQ_LEN 6
@@ -73,12 +74,77 @@
static int xres = CONFIG_INPUT_MOUSEDEV_SCREEN_X;
static int yres = CONFIG_INPUT_MOUSEDEV_SCREEN_Y;
+static void mousedev_abs_event(struct input_handle *handle, struct mousedev_list *list, unsigned int code, int value)
+{
+ int size;
+
+ /* Ignore joysticks */
+ if (test_bit(BTN_TRIGGER, handle->dev->keybit))
+ return;
+
+ /* Handle touchpad data */
+ if (test_bit(BTN_TOOL_FINGER, handle->dev->keybit) &&
+ test_bit(ABS_PRESSURE, handle->dev->absbit) &&
+ test_bit(ABS_TOOL_WIDTH, handle->dev->absbit)) {
+ switch (code) {
+ case ABS_PRESSURE:
+ if (!list->finger) {
+ if (value > 30)
+ list->finger = 1;
+ } else {
+ if (value < 25)
+ list->finger = 0;
+ else if (list->finger < 3)
+ list->finger++;
+ }
+ break;
+ case ABS_X:
+ if (list->finger >= 3) {
+ list->dx += (value - list->oldx) / 8;
+ }
+ list->oldx = value;
+ break;
+ case ABS_Y:
+ if (list->finger >= 3) {
+ list->dy -= (value - list->oldy) / 8;
+ }
+ list->oldy = value;
+ break;
+ }
+ return;
+ }
+
+ /* Handle tablet like devices */
+ switch (code) {
+ case ABS_X:
+ size = handle->dev->absmax[ABS_X] - handle->dev->absmin[ABS_X];
+ if (size != 0) {
+ list->dx += (value * xres - list->oldx) / size;
+ list->oldx += list->dx * size;
+ } else {
+ list->dx += value - list->oldx;
+ list->oldx += list->dx;
+ }
+ break;
+ case ABS_Y:
+ size = handle->dev->absmax[ABS_Y] - handle->dev->absmin[ABS_Y];
+ if (size != 0) {
+ list->dy -= (value * yres - list->oldy) / size;
+ list->oldy -= list->dy * size;
+ } else {
+ list->dy -= value - list->oldy;
+ list->oldy -= list->dy;
+ }
+ break;
+ }
+}
+
static void mousedev_event(struct input_handle *handle, unsigned int type, unsigned int code, int value)
{
struct mousedev *mousedevs[3] = { handle->private, &mousedev_mix, NULL };
struct mousedev **mousedev = mousedevs;
struct mousedev_list *list;
- int index, size, wake;
+ int index, wake;
while (*mousedev) {
@@ -87,31 +153,7 @@
list_for_each_entry(list, &(*mousedev)->list, node)
switch (type) {
case EV_ABS:
- if (test_bit(BTN_TRIGGER, handle->dev->keybit))
- break;
- switch (code) {
- case ABS_X:
- size = handle->dev->absmax[ABS_X] - handle->dev->absmin[ABS_X];
- if (size != 0) {
- list->dx += (value * xres - list->oldx) / size;
- list->oldx += list->dx * size;
- } else {
- list->dx += value - list->oldx;
- list->oldx += list->dx;
- }
- break;
-
- case ABS_Y:
- size = handle->dev->absmax[ABS_Y] - handle->dev->absmin[ABS_Y];
- if (size != 0) {
- list->dy -= (value * yres - list->oldy) / size;
- list->oldy -= list->dy * size;
- } else {
- list->dy -= value - list->oldy;
- list->oldy -= list->dy;
- }
- break;
- }
+ mousedev_abs_event(handle, list, code, value);
break;
case EV_REL:
@@ -472,6 +514,12 @@
.keybit = { [LONG(BTN_TOUCH)] = BIT(BTN_TOUCH) },
.absbit = { BIT(ABS_X) | BIT(ABS_Y) },
}, /* A tablet like device, at least touch detection, two absolute axes */
+ {
+ .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT | INPUT_DEVICE_ID_MATCH_ABSBIT,
+ .evbit = { BIT(EV_KEY) | BIT(EV_ABS) },
+ .keybit = { [LONG(BTN_TOOL_FINGER)] = BIT(BTN_TOOL_FINGER) },
+ .absbit = { BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE) | BIT(ABS_TOOL_WIDTH) },
+ }, /* A touchpad */
{ }, /* Terminating entry */
};
diff -Nru a/include/linux/input.h b/include/linux/input.h
--- a/include/linux/input.h Thu Sep 25 18:37:28 2003
+++ b/include/linux/input.h Thu Sep 25 18:37:28 2003
@@ -404,6 +404,8 @@
#define BTN_TOUCH 0x14a
#define BTN_STYLUS 0x14b
#define BTN_STYLUS2 0x14c
+#define BTN_TOOL_DOUBLETAP 0x14d
+#define BTN_TOOL_TRIPLETAP 0x14e
#define BTN_WHEEL 0x150
#define BTN_GEAR_DOWN 0x150
@@ -521,6 +523,7 @@
#define ABS_DISTANCE 0x19
#define ABS_TILT_X 0x1a
#define ABS_TILT_Y 0x1b
+#define ABS_TOOL_WIDTH 0x1c
#define ABS_VOLUME 0x20
#define ABS_MISC 0x28
#define ABS_MAX 0x3f
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/