[PATCH] atyfb updates

From: Geert Uytterhoeven
Date: Tue Sep 23 2003 - 00:56:16 EST


Hoi Daniël,

Here are some more updates for atyfb, while trying to build the Atari[*]
support (Mach64 GX only):
- ram_resv[] is needed for Mach64 GX, too.
- Move declaration of v, since it's used for generic LCD only.
- aty_ld_pll() used to be global, but now it's defined for Mach64 CT only,
causing a link failure if you don't enable Mach64 CT support.
Since Mach64 GX never has a GTB-style DSP, make that part of the code
Mach64 CT dependant.
- Move declaration of pll_ref_div, since it's used for Mach64 CT only.
- Kill warnings when ioremap()ing in the Atari case.
- Add missing xres parameter to Mach64 GX aty_var_to_pll_*() routines.

Most of these problems should show up on ia32 too if you enable Mach64 GX.

[*] Caveat: I don't have Atari hardware, just doing compile tests.

--- linux-2.4.23-pre5/drivers/video/aty/atyfb_base.c Mon Sep 22 08:43:06 2003
+++ linux-m68k-2.4.23-pre5/drivers/video/aty/atyfb_base.c Mon Sep 22 21:51:41 2003
@@ -382,6 +382,7 @@

#if defined(CONFIG_FB_ATY_GX) || defined(CONFIG_FB_ATY_CT)
static char ram_dram[] __initdata = "DRAM";
+static char ram_resv[] __initdata = "RESV";
#endif /* CONFIG_FB_ATY_GX || CONFIG_FB_ATY_CT */

#ifdef CONFIG_FB_ATY_GX
@@ -394,7 +395,6 @@
static char ram_sgram[] __initdata = "SGRAM";
static char ram_wram[] __initdata = "WRAM";
static char ram_off[] __initdata = "OFF";
-static char ram_resv[] __initdata = "RESV";
#endif /* CONFIG_FB_ATY_CT */

#ifdef CONFIG_FB_ATY_GX
@@ -487,8 +487,6 @@
static void aty_set_crtc(const struct fb_info_aty *info,
const struct crtc *crtc)
{
- u32 v;
-
aty_st_le32(CRTC_H_TOTAL_DISP, crtc->h_tot_disp, info);
aty_st_le32(CRTC_H_SYNC_STRT_WID, crtc->h_sync_strt_wid, info);
#ifdef CONFIG_FB_ATY_GENERIC_LCD
@@ -522,6 +520,7 @@
registers.
*/
if (info->lcd_table != 0) {
+ u32 v;
/* Enable/disable horizontal stretching */
v = aty_ld_lcd(HORZ_STRETCHING, info);
v = v & ~(HORZ_STRETCH_RATIO | HORZ_STRETCH_EN | AUTO_HORZ_RATIO |
@@ -1984,7 +1983,6 @@
#if defined(CONFIG_PPC)
int sense;
#endif
- u8 pll_ref_div;
u32 monitors_enabled;

info->aty_cmap_regs = (struct aty_cmap_regs *)(info->ati_regbase+0xc0);
@@ -2094,19 +2092,24 @@

info->ref_clk_per = 1000000000000ULL/14318180;
xtal = "14.31818";
- if (M64_HAS(GTB_DSP) && (pll_ref_div = aty_ld_pll(PLL_REF_DIV, info))) {
- int diff1, diff2;
- diff1 = 510*14/pll_ref_div-pll;
- diff2 = 510*29/pll_ref_div-pll;
- if (diff1 < 0)
- diff1 = -diff1;
- if (diff2 < 0)
- diff2 = -diff2;
- if (diff2 < diff1) {
- info->ref_clk_per = 1000000000000ULL/29498928;
- xtal = "29.498928";
- }
+#ifdef CONFIG_FB_ATY_CT
+ if (M64_HAS(GTB_DSP)) {
+ u8 pll_ref_div = aty_ld_pll(PLL_REF_DIV, info);
+ if (pll_ref_div) {
+ int diff1, diff2;
+ diff1 = 510*14/pll_ref_div-pll;
+ diff2 = 510*29/pll_ref_div-pll;
+ if (diff1 < 0)
+ diff1 = -diff1;
+ if (diff2 < 0)
+ diff2 = -diff2;
+ if (diff2 < diff1) {
+ info->ref_clk_per = 1000000000000ULL/29498928;
+ xtal = "29.498928";
+ }
+ }
}
+#endif /* CONFIG_FB_ATY_CT */

i = aty_ld_le32(MEM_CNTL, info);
gtb_memsize = M64_HAS(GTB_DSP);
@@ -2992,9 +2995,11 @@
* Map the video memory (physical address given) to somewhere in the
* kernel address space.
*/
- info->frame_buffer = ioremap(phys_vmembase[m64_num], phys_size[m64_num]);
+ info->frame_buffer = (unsigned long)ioremap(phys_vmembase[m64_num],
+ phys_size[m64_num]);
info->frame_buffer_phys = info->frame_buffer; /* Fake! */
- info->ati_regbase = ioremap(phys_guiregbase[m64_num], 0x10000)+0xFC00ul;
+ info->ati_regbase = (unsigned long)ioremap(phys_guiregbase[m64_num],
+ 0x10000)+0xFC00ul;
info->ati_regbase_phys = info->ati_regbase; /* Fake! */

aty_st_le32(CLOCK_CNTL, 0x12345678, info);
--- linux-2.4.23-pre5/drivers/video/aty/mach64_gx.c Sat Sep 13 16:29:48 2003
+++ linux-m68k-2.4.23-pre5/drivers/video/aty/mach64_gx.c Mon Sep 22 13:01:58 2003
@@ -124,7 +124,7 @@
}

static int aty_var_to_pll_514(const struct fb_info_aty *info, u32 vclk_per,
- u8 bpp, union aty_pll *pll)
+ u8 bpp, u32 xres, union aty_pll *pll)
{
/*
* FIXME: use real calculations instead of using fixed values from the old
@@ -325,7 +325,7 @@
*/

static int aty_var_to_pll_18818(const struct fb_info_aty *info, u32 vclk_per,
- u8 bpp, union aty_pll *pll)
+ u8 bpp, u32 xres, union aty_pll *pll)
{
u32 MHz100; /* in 0.01 MHz */
u32 program_bits;
@@ -481,7 +481,7 @@
*/

static int aty_var_to_pll_1703(const struct fb_info_aty *info, u32 vclk_per,
- u8 bpp, union aty_pll *pll)
+ u8 bpp, u32 xres, union aty_pll *pll)
{
u32 mhz100; /* in 0.01 MHz */
u32 program_bits;
@@ -595,7 +595,7 @@
*/

static int aty_var_to_pll_8398(const struct fb_info_aty *info, u32 vclk_per,
- u8 bpp, union aty_pll *pll)
+ u8 bpp, u32 xres, union aty_pll *pll)
{
u32 tempA, tempB, fOut, longMHz100, diff, preDiff;

@@ -723,7 +723,7 @@
*/

static int aty_var_to_pll_408(const struct fb_info_aty *info, u32 vclk_per,
- u8 bpp, union aty_pll *pll)
+ u8 bpp, u32 xres, union aty_pll *pll)
{
u32 mhz100; /* in 0.01 MHz */
u32 program_bits;

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/