[BUG] 2.4.22 ACPI hangs up NFORCE2 system when using kudzu

From: JSTHEMASTER
Date: Sun Sep 21 2003 - 15:30:07 EST

Next message: Ricardo Galli: "2.6.0-test5-bk8: synaptics still losing sync"
Previous message: Peter Osterlund: "Re: Broken synaptics mouse.."
Next in thread: Andrew de Quincey: "Re: [BUG] 2.4.22 ACPI hangs up NFORCE2 system when using kudzu"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

[1.]
When using Kernel 2.4.22 (<= 2.4.21 works perfectly) ACPI on a system with NFORCE2 chipset the system hangs when starting
kudzu without any output or log-entry!

[2.]
If you enable kernel 2.4.22 ACPI on a system running NFORCE2 chipset (I got a MSI K7N2 Delta-L mainboard) the system hangs
when using kudzu (Redhat Hardware detection tool, any version) without any output or log entry. I'm sorry, I was unable to monitor any crash dump information because the whole system hung up and didn't write any data. Kernels 2.4.21 or lower work fine.

[3.]
acpi, kudzu, nforce2, k72n delta-l, hwacpi, kernel 2.4.22

[4.] Linux version 2.4.22 (root@mrsuicide) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Fre Aug 8 02:24:50 CEST 2003

[5.] No message or log entry.

[6.] Get a NFORCE2 board and try kernel 2.4.22 with acpi.

[7.]
[7.1.] Gnu C 3.2.2
Gnu make 3.79.1
util-linux 2.11y
mount 2.11y
modutils 2.4.22
e2fsprogs 1.32
jfsutils 1.0.17
reiserfsprogs 3.6.4
pcmcia-cs 3.1.31
quota-tools 3.06.
PPP 2.4.1
isdn4k-utils 3.1pre4
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 2.0.11
Net-tools 1.60
Kbd 1.08
Sh-utils 4.5.3
Modules Loaded nvaudio nvidia i2c-nforce2 w83781d i2c-isa i2c-dev i2c-proc i2c-core ipt_state ipt_MASQUERADE iptable_nat ip_conntrack parport_pc lp parport iptable_filter ip_tables ppp_synctty ppp_async ppp_generic slhc nvnet nls_iso8859-1 nls_cp437 keybdev mousedev hid input rtc

[7.2.] processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(tm) XP 2600+
stepping : 1
cpu MHz : 2079.544
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 4141.87

[7.3.]
nvaudio 39668 0 (autoclean)
nvidia 1764672 11 (autoclean)
i2c-nforce2 4040 0 (unused)
w83781d 24592 0 (unused)
i2c-isa 1292 0 (unused)
i2c-dev 4960 0 (unused)
i2c-proc 8052 0 [w83781d]
i2c-core 19556 0 [i2c-nforce2 w83781d i2c-isa i2c-dev i2c-proc]
ipt_state 1048 12 (autoclean)
ipt_MASQUERADE 2200 1 (autoclean)
iptable_nat 20824 1 (autoclean) [ipt_MASQUERADE]
ip_conntrack 26824 2 (autoclean) [ipt_state ipt_MASQUERADE iptable_nat]
parport_pc 18756 1 (autoclean)
lp 8772 0 (autoclean)
parport 35968 1 (autoclean) [parport_pc lp]
iptable_filter 2412 1 (autoclean)
ip_tables 14648 6 [ipt_state ipt_MASQUERADE iptable_nat iptable_filter]
ppp_synctty 7840 0 (unused)
ppp_async 9376 1
ppp_generic 24316 3 [ppp_synctty ppp_async]
slhc 6932 0 [ppp_generic]
nvnet 30720 1
nls_iso8859-1 3548 1 (autoclean)
nls_cp437 5148 1 (autoclean)
keybdev 2880 0 (unused)
mousedev 5428 1
hid 22020 0 (unused)
input 5664 0 [keybdev mousedev hid]
rtc 8444 0 (autoclean)

[7.4.] 0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0290-0297 : w83627hf
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
5000-5007 : nForce2 SMBus
5040-5047 : nForce2 SMBus
c000-cfff : PCI Bus #01
c000-c0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
c000-c0ff : 8139too
d000-d007 : PCI device 10de:0066 (nVidia Corporation)
d400-d4ff : PCI device 10de:006a (nVidia Corporation)
d400-d4ff : NVIDIA nForce2 Audio
d800-d87f : PCI device 10de:006a (nVidia Corporation)
d800-d83f : NVIDIA nForce2 Audio
e400-e41f : PCI device 10de:0064 (nVidia Corporation)
f000-f00f : PCI device 10de:0065 (nVidia Corporation)
f000-f007 : ide0
f008-f00f : ide1

00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000cd7ff : Extension ROM
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-00305268 : Kernel code
00305269-0038a943 : Kernel data
1fff0000-1fff2fff : ACPI Non-volatile Storage
1fff3000-1fffffff : ACPI Tables
d0000000-d7ffffff : PCI device 10de:01e0 (nVidia Corporation)
d8000000-dfffffff : PCI Bus #02
d8000000-dfffffff : nVidia Corporation NV10 [GeForce 256 SDR]
d8000000-d9ffffff : rivafb
e0000000-e1ffffff : PCI Bus #02
e0000000-e0ffffff : nVidia Corporation NV10 [GeForce 256 SDR]
e2000000-e2ffffff : PCI Bus #01
e2000000-e20000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
e2000000-e20000ff : 8139too
e3000000-e3000fff : PCI device 10de:0066 (nVidia Corporation)
e3000000-e3000fff : nvnet
e3001000-e3001fff : PCI device 10de:006a (nVidia Corporation)
e3003000-e3003fff : PCI device 10de:0067 (nVidia Corporation)
e3003000-e3003fff : usb-ohci
e3004000-e3004fff : PCI device 10de:0067 (nVidia Corporation)
e3004000-e3004fff : usb-ohci
e3005000-e30050ff : PCI device 10de:0068 (nVidia Corporation)
e3005000-e30050ff : ehci-hcd

[7.5.] 00:00.0 Host bridge: nVidia Corporation: Unknown device 01e0 (rev c1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [40] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4
Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x4
Capabilities: [60] #08 [2001]

00:00.1 RAM memory: nVidia Corporation: Unknown device 01eb (rev c1)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

00:00.2 RAM memory: nVidia Corporation: Unknown device 01ee (rev c1)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

00:00.3 RAM memory: nVidia Corporation: Unknown device 01ed (rev c1)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

00:00.4 RAM memory: nVidia Corporation: Unknown device 01ec (rev c1)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

00:00.5 RAM memory: nVidia Corporation: Unknown device 01ef (rev c1)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-

00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a3)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [48] #08 [01e1]

00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at e400 [size=32]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e3003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at e3004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 4
Region 0: Memory at e3005000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] #0a [2080]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 570c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e3000000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d000 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-

00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d400 [size=256]
Region 1: I/O ports at d800 [size=128]
Region 2: Memory at e3001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:08.0 PCI bridge: nVidia Corporation: Unknown device 006c (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e2000000-e2ffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 5700
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

01:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Allied Telesyn International AT-2500TX/ACPI
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at e2000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:00.0 VGA compatible controller: nVidia Corporation NV10 [GeForce 256 SDR] (rev 10) (prog-if 00 [VGA])
Subsystem: Elsa AG: Unknown device 0c41
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 12
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
Command: RQ=31 SBA- AGP+ 64bit- FW- Rate=x4

[7.6.] Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: HL-DT-ST Model: CD-RW GCE-8320B Rev: 1.04
Type: CD-ROM ANSI SCSI revision: 02

[7.7.] -

[X.] If nothing works, a simple downgrade of ACPI modules would fix the problem...

Greeings,
Jan Schiefer!

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Ricardo Galli: "2.6.0-test5-bk8: synaptics still losing sync"
Previous message: Peter Osterlund: "Re: Broken synaptics mouse.."
Next in thread: Andrew de Quincey: "Re: [BUG] 2.4.22 ACPI hangs up NFORCE2 system when using kudzu"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]