Re: Bug/Oops Power Management with linux-2.6.0-test5-mm2

[Patrick Mochel]

> echo -n mem > /sys/power/state
> 
> PM: Preparing system for suspend
> Stopping tasks: ========================================================================|
> hda: start_power_step(step: 0)
> hda: start_power_step(step: 1)
> hda: complete_power_step(step: 1, stat: 50, err: 0)
> hda: completing PM request, suspend
> PM: Entering state.
> Back to C!
> zapping low mappings.
> PM: Finishing up.
> PCI: Setting latency timer of device 0000:00:1f.5 to 64
> hda: Wakeup request inited, waiting for !BSY...
> e1000: eth0 NIC Link is Up 100 Mbps Full Duplex
> hda: start_power_step(step: 1000)
> hda: completing PM request, resume
> Restarting tasks... done
> agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
> agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
> agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
> MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
> Bank 1: e200000000000005
> agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
> agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
> agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
> 
> The only problem now is that if I suspend, when resuming, neither the
> mouse nor the NIC works, but it's getting much better.
> 
> 
> with 
> echo -n disk > /sys/power/state
> 
> Stopping tasks: ===================================================================
>  stopping tasks failed (1 tasks remaining)
>  Restarting tasks...<6> Strange, artsd not stopped
>   done

Excuse my confusion, but is the machine suspending or is it returning 
immediately to the command line? 

Thanks,


	Pat


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/