2.4, b44 transmit timeout

[Norbert Preining]

Hi!

I have the following problem since I switched from bcm4400 to the
`in-kernel' driver b44:
Sep  1 17:37:11 gandalf vmunix: b44: eth0: Link is up at 10 Mbps, half duplex.
Sep  1 17:37:11 gandalf vmunix: b44: eth0: Flow control is off for TX and off for RX.
Sep  1 17:37:16 gandalf vmunix: NETDEV WATCHDOG: eth0: transmit timed out
Sep  1 17:37:16 gandalf vmunix: b44: eth0: transmit timed out, resetting
Sep  1 17:37:17 gandalf vmunix: b44: eth0: Link is down.
Sep  1 17:37:20 gandalf vmunix: b44: eth0: Link is up at 10 Mbps, half duplex.
Sep  1 17:37:20 gandalf vmunix: b44: eth0: Flow control is off for TX and off for RX.

and so on. This didn't (and still does not) happen with the bcm4400
(from debian sid bcm4400-source).

I compiled the kernel myself on debian/sid, it is a laptop (acer tm654).

If you need more information I will provide all I can do.

Best wishes

Norbert

-------------------------------------------------------------------------------
Norbert Preining <preining AT logic DOT at>         Technische Universität Wien
gpg DSA: 0x09C5B094      fp: 14DF 2E6C 0307 BE6D AD76  A9C0 D2BF 4AA3 09C5 B094
-------------------------------------------------------------------------------
TIMBLE (vb.)
(Of small nasty children.) To fail over very gently, look around to
see who's about, and then yell blue murder.
			--- Douglas Adams, The Meaning of Liff
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/