PROBLEM with DMA, IDE-SCSI and Kernel 2.4.21/22pre3

From: Bernhard Walle
Date: Sun Aug 24 2003 - 13:24:56 EST

Next message: Helge Hafting: "Re: FS: hardlinks on directories"
Previous message: Willy Tarreau: "Re: [AMD76X]"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hello,

1) I have a problem mounting a CD-ROM through ide-scsi emulation.

2) Following error occures:
~~~~~
| [~] $ LANG=en_US mount /cdrom
| /dev/cdrom: Input/output error
| mount: I could not determine the filesystem type, and none was specified

If I turn DMA mode off, it works. It even works with Kernel 2.4.20
and prior versions. According to the Kernel I have a "SAMSUNG
SC-140B, ATAPI CD/DVD-ROM drive". I currently use 2.4.22pre3 but I
have also problems with 2.4.21 (the final version from kernel.org) or
2.4.22pre2. My mainboard is a ECS Elitegroup K7S5A-LAN.

Here's some information:
~~~~~~~~~~~
[~] $ grep cdrom /etc/fstab
/dev/cdrom /cdrom auto ro,user,noauto,umask=222 0 0

[~] $ ls -l /dev/cdrom
lrwxrwxrwx 1 root root 3 25. Jul 17:34 /dev/cdrom -> sr0

More information in X at the end of the mail. If you need further
information please contact me directly -- I'm not reading the kernel
list.

3) Keywords: ide-scsi mounting dma

4) Version:
Linux version 2.4.22-rc3 (root@hugo) (gcc version 2.95.4 20011002
(Debian prerelease)) #1 Son Aug 24 17:14:34 CEST 2003

5) --

6) --

7) 7.1) If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

Linux hugo 2.4.22-rc3 #1 Son Aug 24 17:14:34 CEST 2003 i686 unknown

Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11z
mount 2.11z
modutils 2.4.21
e2fsprogs 1.33
isdn4k-utils 3.1pre4
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 3.1.6
Net-tools 1.60
Kbd 1.06
Sh-utils 2.0.11
Modules Loaded mousedev hid ipt_TOS ipt_state ipt_REJECT ipt_LOG
ipt_limit iptable_mangle iptable_nat ip_conntrack iptable_filter ip_tables
parport_pc lp parport binfmt_misc snd-seq-oss snd-seq-midi-event snd-seq
snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-pcm snd-timer snd-ac97-codec
snd-page-alloc snd-mpu401-uart snd-rawmidi snd-seq-device snd sis900
usbmouse apm i2c-isa it87 i2c-proc i2c-core ide-scsi scanner soundcore
hisax isdn slhc isa-pnp keybdev usbkbd input usb-ohci usbcore

7.2) processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Athlon(tm) XP 2200+
stepping : 0
cpu MHz : 1792.397
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3578.26

7.3) mousedev 3736 1
hid 16836 0 (unused)
ipt_TOS 1080 6 (autoclean)
ipt_state 568 13 (autoclean)
ipt_REJECT 3192 4 (autoclean)
ipt_LOG 3192 3 (autoclean)
ipt_limit 952 3 (autoclean)
iptable_mangle 2160 1 (autoclean)
iptable_nat 15192 0 (autoclean) (unused)
ip_conntrack 16584 2 (autoclean) [ipt_state iptable_nat]
iptable_filter 1668 1 (autoclean)
ip_tables 11096 10 [ipt_TOS ipt_state ipt_REJECT ipt_LOG ipt_limit
iptable_mangle iptable_nat iptable_filter]
parport_pc 24680 1 (autoclean)
lp 6880 0 (autoclean)
parport 22720 1 (autoclean) [parport_pc lp]
binfmt_misc 5576 1
snd-seq-oss 23072 0 (unused)
snd-seq-midi-event 2696 0 [snd-seq-oss]
snd-seq 35600 2 [snd-seq-oss snd-seq-midi-event]
snd-pcm-oss 36804 0 (unused)
snd-mixer-oss 10968 1 [snd-pcm-oss]
snd-intel8x0 15588 1
snd-pcm 53952 0 [snd-pcm-oss snd-intel8x0]
snd-timer 13700 0 [snd-seq snd-pcm]
snd-ac97-codec 32840 0 [snd-intel8x0]
snd-page-alloc 3984 0 [snd-intel8x0 snd-pcm]
snd-mpu401-uart 2736 0 [snd-intel8x0]
snd-rawmidi 11744 0 [snd-mpu401-uart]
snd-seq-device 3588 0 [snd-seq-oss snd-seq snd-rawmidi]
snd 25924 0 [snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss
snd-mixer-oss snd-intel8x0 snd-pcm snd-timer
snd-ac97-codec snd-mpu401-uart snd-rawmidi
snd-seq-device]
sis900 12108 0 (unused)
usbmouse 1788 0 (unused)
apm 9120 1
i2c-isa 1164 0 (unused)
it87 7080 0 (unused)
i2c-proc 6256 0 [it87]
i2c-core 12580 0 [i2c-isa it87 i2c-proc]
ide-scsi 8880 0
scanner 9884 0 (unused)
soundcore 3396 5 [snd]
hisax 455428 3
isdn 118048 4 [hisax]
slhc 4528 1 [isdn]
isa-pnp 27748 0 [hisax]
keybdev 1696 0 (unused)
usbkbd 2844 0 (unused)
input 3264 0 [mousedev usbmouse keybdev usbkbd]
usb-ohci 17448 0 (unused)
usbcore 55712 1 [hid usbmouse scanner usbkbd usb-ohci]

7.4) 0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0290-0297 : it87
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
a000-afff : PCI Bus #01
a800-a8ff : ATI Technologies Inc Rage 128 RF/SG AGP
d000-d01f : AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz]
d000-d01f : avm PCI
d400-d4ff : Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet
d400-d4ff : sis900
d800-d83f : Silicon Integrated Systems [SiS] Sound Controller
d800-d83f : SiS SI7012 - Controller
dc00-dcff : Silicon Integrated Systems [SiS] Sound Controller
dc00-dcff : SiS SI7012 - AC'97
ff00-ff0f : Silicon Integrated Systems [SiS] 5513 [IDE]
ff00-ff07 : ide0
ff08-ff0f : ide1

00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000cffff : Extension ROM
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-002ed283 : Kernel code
002ed284-003be6c3 : Kernel data
1fff0000-1fff7fff : ACPI Tables
1fff8000-1fffffff : ACPI Non-volatile Storage
c7c00000-cfcfffff : PCI Bus #01
c8000000-cbffffff : ATI Technologies Inc Rage 128 RF/SG AGP
c8000000-c82fffff : vesafb
cfe00000-cfefffff : PCI Bus #01
cfefc000-cfefffff : ATI Technologies Inc Rage 128 RF/SG AGP
cfffcfe0-cfffcfff : AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz]
cfffd000-cfffdfff : Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet
cfffd000-cfffdfff : sis900
cfffe000-cfffefff : Silicon Integrated Systems [SiS] USB 1.0 Controller
cfffe000-cfffefff : usb-ohci
cffff000-cfffffff : Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
cffff000-cfffffff : usb-ohci
d0000000-d3ffffff : Silicon Integrated Systems [SiS] 735 Host
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffee0000-ffefffff : reserved
fffc0000-ffffffff : reserved

7.5) 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: cfe00000-cfefffff
Prefetchable memory behind bridge: c7c00000-cfcfffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:02.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 0a14
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), cache line size 08
Interrupt: pin D routed to IRQ 12
Region 0: Memory at cfffe000 (32-bit, non-prefetchable) [size=4K]

00:02.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 0a14
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at cffff000 (32-bit, non-prefetchable) [size=4K]

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Region 4: I/O ports at ff00 [size=16]

00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
Subsystem: Elitegroup Computer Systems: Unknown device 0a14
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at d800 [size=64]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 90)
Subsystem: Elitegroup Computer Systems: Unknown device 0a14
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 3
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at cfffd000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at cffc0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz] (rev 02)
Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH FRITZ!Card ISDN Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 12
Region 0: Memory at cfffcfe0 (32-bit, non-prefetchable) [size=32]
Region 1: I/O ports at d000 [size=32]

01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0008
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 0
Region 0: Memory at c8000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at a800 [size=256]
Region 2: Memory at cfefc000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at cfec0000 [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none>
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

7.6) Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SAMSUNG Model: CD-ROM SC-140B Rev: BH10
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: LITE-ON Model: LTR-32123S Rev: XS0R
Type: CD-ROM ANSI SCSI revision: 02

X) X.1) dmesg gives me:

ide-scsi: The scsi wants to send us more data than expected - discarding data
ide-scsi: [[ 28 0 0 0 0 0 0 0 2 0 0 0 ]
]
ide-scsi: expected 4096 got 6144 limit 4096
ide-scsi: The scsi wants to send us more data than expected - discarding data
ide-scsi: [[ 28 0 0 0 0 0 0 0 2 0 0 0 ]
]
ide-scsi: expected 4096 got 6144 limit 4096
ide-scsi: The scsi wants to send us more data than expected - discarding data
ide-scsi: [[ 28 0 0 0 0 2 0 0 8 0 0 0 ]
]
ide-scsi: expected 16384 got 18432 limit 16384
scsi0: ERROR on channel 0, id 0, lun 0, CDB: Request Sense 00 00 00 40 00
Current sd0b:00: sense key Medium Error
Additional sense indicates No seek complete
I/O error: dev 0b:00, sector 8
ide-scsi: The scsi wants to send us more data than expected - discarding data
ide-scsi: [[ 28 0 0 0 0 4 0 0 2 0 0 0 ]
]
ide-scsi: expected 4096 got 6144 limit 4096
ide-scsi: The scsi wants to send us more data than expected - discarding data
ide-scsi: [[ 28 0 0 0 0 4 0 0 2 0 0 0 ]
]
ide-scsi: expected 4096 got 6144 limit 4096
ide-scsi: The scsi wants to send us more data than expected - discarding data
ide-scsi: [[ 28 0 0 0 0 0 0 0 1 0 0 0 ]
]
ide-scsi: expected 2048 got 4096 limit 2048
FAT: bogus logical sector size 0
VFS: Can't find a valid FAT filesystem on dev 0b:00.

Regards,
Bernhard

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Helge Hafting: "Re: FS: hardlinks on directories"
Previous message: Willy Tarreau: "Re: [AMD76X]"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]