Re: Does sysfs really provides persistent hardware path to devices?

[Greg KH]

On Sun, Aug 17, 2003 at 07:04:25PM -0700, jw schultz wrote:
> 
> <OT>
> That's nice.  Now add a second camera from the same vendor
> :(

Then don't use that rule :)

> No, i don't expect you to be able to uniquely identify
> identical devices being added and removed from a single USB buss
> in a persistent way.

If there is _no_ unique way to identify the device, that that is
impossible.

> But it would be nice if we could get consistency between busses so
> that a mouse on one USB buss weren't confused with a mouse on another
> USB buss.

We already have that today, it's called /dev/mice :)

Seriously, I support topology positions, that solves this problem for
real.

> > Does that help?  Have you looked at the 2003 OLS paper about udev for
> > more information?
> 
> Actually you have not answered his question.  And i think it
> a reasonable one.  It could be it was answered elsewhere.

I don't think I really understand the question.  Given a specific
question, I think I could.

> >>>> Question: how to configure udev so that "database" always refers to LUN 0
> >>>> on target 0 on bus 0 on HBA in PCI slot 1.
> >> Let's avoid this communication problem. You show me namedev.config line that 
> >> implements the above.
> 
> I'll try to put slightly differently.  I'll concede that we
> cannot positionaly identify USB devices so lets set that
> aside for the nonce.

Um, you can, see the topology stuff.

> We can persistently, positionaly
> identify a device within the HBA context (BUS +ID + LUN) and
> should be able to do the same for a PCI HBA (PCI slot +
> device) or (PCI bridge topology).

Yup, that works too.

> So can i uniquely identify using persistent positional
> information a drive at PCI_slot=1, HBA_on_card=0, BUS=0,
> ID=1, LUN=0?

Use that position as a topology/name indicator.

> And how do i uniquely identify it in the udev
> config file so that adding the same model drive in the same
> BUS+ID+LUN on an same model HBA card in another PCI slot
> does not confuse the two?

Again, use the topology position.

Please, go read the paper and look at sysfs before asking anything
else...

thanks,

greg k-h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/