RE: ASUS PR-DLSW: ACPI Bugs

[Brown, Len]

See that you've got the latest BIOS -- Asus's web page advertises 1008:
http://www.asus.com/support/download/item.aspx?ModelName=PR-DLSW

If acpi=off is still required to boot, then file a bug at
http://bugzilla.kernel.org category=Power Management; Component=ACPI;
Owner=len.brown@xxxxxxxxx

Then I'll ask you:
1. can you try the latest 2.6 kernel -- it has slightly newer ACPI code.
2. can you attach the output of acpidmp:
http://developer.intel.com/technology/iapc/acpi/downloads/pmtools-200107
30.tar.gz
3. can you attch the output of dmidecode:
http://www.nongnu.org/dmidecode/

Thanks,
-Len




> -----Original Message-----
> From: Erich Stamberger [mailto:eberger@xxxxxxxxxxxxxxxxxxxx] 
> Sent: Saturday, August 16, 2003 7:57 PM
> To: linux-kernel@xxxxxxxxxxxxxxx
> Subject: ASUS PR-DLSW: ACPI Bugs
> 
> 
> Hello,
> 
> 2.6.0-test3 with ACPI enabled fails to boot on ASUS PR-DLSW: Cannot
> open root device .. Obviously the SCSI controllers (LSI 1010-66)
> are not detected (complete dmesg from serial console below).
> 
> When setting pci=noacpi the machine hangs in an endless loop
> trying to initialise the SCSI bus.
> 
> With acpi=off or CONFIG_ACPI_HT_ONLY the machine
> boots (lspci -vvx below).
> 
> Any information / pointers will be appreciated.
> 
> Best regards
> Erich
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/