Re: Communication problem with via-rhine in kernel-2.6.0-test3-bk3+

[Jeff Garzik]

On Mon, Aug 18, 2003 at 08:28:24AM -0700, Hassard, Stephen wrote:
> Hi all,
> 
> I've been happily using the Rhine-II NIC on my VIA Epia-800 with
> 2.6.0-test3, but ever since bk3 via-rhine seems to be broken.
> 2.6.0-test3-bk2 works without problems.
> 
> I've contacted the driver maintainer, Roger Luethi, and he mentioned that if
> it was a problem since 2.6.0-test3, I should contact the kernel mailing
> list.
> 
> The interface is detected properly, but no data is transmitted. DHCP doesn't
> work. When I manually configure the interface and try to send data, I get
> the following error, which repeats:
> >>
> eth0: Transmit timed out, status 1003, PHY status 786d, resetting...
> eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
> <<

Does booting with "pci=noapic" or "acpi=off" or "noapic" help?

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/