[PATCH] disk geometry/capacity cleanups

From: Bartlomiej Zolnierkiewicz
Date: Fri Aug 08 2003 - 18:30:34 EST



Incremental to "kill HDIO_GETGEO_BIG_RAW ioctl" patch.

--bartlomiej


ide: disk geometry/capacity cleanups

>From Andries.Brouwer@xxxxxxx

- kill redundant, never executed code in lba_capacity_is_ok()
- add idedisk_supports_{hpa,lba48}() helpers
- don't recalculate drive->cyl for drives using LBA addressing,
we never fall-back to CHS, so its useless and confusing
- remove wrong drive->head and drive->sect assignments for LBA-48
- don't overwrite id->lba_capacity and id->lba_capacity_2

drivers/ide/ide-disk.c | 92 +++++++++++++++++++++++++++----------------------
1 files changed, 52 insertions(+), 40 deletions(-)

diff -puN drivers/ide/ide-disk.c~ide-disk-andries drivers/ide/ide-disk.c
--- linux-2.6.0-test2-bk7/drivers/ide/ide-disk.c~ide-disk-andries 2003-08-09 00:17:35.567186112 +0200
+++ linux-2.6.0-test2-bk7-root/drivers/ide/ide-disk.c 2003-08-09 00:17:35.572185352 +0200
@@ -86,11 +86,6 @@ static int lba_capacity_is_ok (struct hd
{
unsigned long lba_sects, chs_sects, head, tail;

- if ((id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400)) {
- printk("48-bit Drive: %llu \n", id->lba_capacity_2);
- return 1;
- }
-
/*
* The ATA spec tells large drives to return
* C/H/S = 16383/16/63 independent of their size.
@@ -1074,11 +1069,29 @@ static unsigned long long sectors_to_MB(
return n;
}

+/*
+ * Bits 10 of command_set_1 and cfs_enable_1 must be equal,
+ * so on non-buggy drives we need test only one.
+ * However, we should also check whether these fields are valid.
+ */
+static inline int idedisk_supports_hpa(const struct hd_driveid *id)
+{
+ return (id->command_set_1 & 0x0400) && (id->cfs_enable_1 & 0x0400);
+}
+
+/*
+ * The same here.
+ */
+static inline int idedisk_supports_lba48(const struct hd_driveid *id)
+{
+ return (id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400);
+}
+
static inline void idedisk_check_hpa_lba28(ide_drive_t *drive)
{
unsigned long capacity, set_max;

- capacity = drive->id->lba_capacity;
+ capacity = drive->capacity;
set_max = idedisk_read_native_max_address(drive);

if (set_max <= capacity)
@@ -1093,7 +1106,7 @@ static inline void idedisk_check_hpa_lba
#ifdef CONFIG_IDEDISK_STROKE
set_max = idedisk_set_max_address(drive, set_max);
if (set_max) {
- drive->id->lba_capacity = set_max;
+ drive->capacity = set_max;
printk(KERN_INFO "%s: Host Protected Area disabled.\n",
drive->name);
}
@@ -1104,7 +1117,7 @@ static inline void idedisk_check_hpa_lba
{
unsigned long long capacity_2, set_max_ext;

- capacity_2 = drive->id->lba_capacity_2;
+ capacity_2 = drive->capacity48;
set_max_ext = idedisk_read_native_max_address_ext(drive);

if (set_max_ext <= capacity_2)
@@ -1119,7 +1132,8 @@ static inline void idedisk_check_hpa_lba
#ifdef CONFIG_IDEDISK_STROKE
set_max_ext = idedisk_set_max_address_ext(drive, set_max_ext);
if (set_max_ext) {
- drive->id->lba_capacity_2 = set_max_ext;
+ drive->capacity48 = set_max_ext;
+ drive->capacity = (unsigned long) set_max_ext;
printk(KERN_INFO "%s: Host Protected Area disabled.\n",
drive->name);
}
@@ -1147,32 +1161,21 @@ static void init_idedisk_capacity (ide_d
* If this drive supports the Host Protected Area feature set,
* then we may need to change our opinion about the drive's capacity.
*/
- int hpa = (id->command_set_1 & 0x0400) && (id->cfs_enable_1 & 0x0400);
+ int hpa = idedisk_supports_hpa(id);

- if ((id->command_set_2 & 0x0400) && (id->cfs_enable_2 & 0x0400)) {
+ if (idedisk_supports_lba48(id)) {
/* drive speaks 48-bit LBA */
- unsigned long long capacity_2;
-
drive->select.b.lba = 1;
+ drive->capacity48 = id->lba_capacity_2;
+ drive->capacity = (unsigned long) drive->capacity48;
if (hpa)
idedisk_check_hpa_lba48(drive);
- capacity_2 = id->lba_capacity_2;
- drive->head = drive->bios_head = 255;
- drive->sect = drive->bios_sect = 63;
- drive->cyl = (unsigned int) capacity_2 / (drive->head * drive->sect);
- drive->bios_cyl = drive->cyl;
- drive->capacity48 = capacity_2;
- drive->capacity = (unsigned long) capacity_2;
} else if ((id->capability & 2) && lba_capacity_is_ok(id)) {
/* drive speaks 28-bit LBA */
- unsigned long capacity;
-
drive->select.b.lba = 1;
+ drive->capacity = id->lba_capacity;
if (hpa)
idedisk_check_hpa_lba28(drive);
- capacity = id->lba_capacity;
- drive->cyl = capacity / (drive->head * drive->sect);
- drive->capacity = capacity;
} else {
/* drive speaks boring old 28-bit CHS */
drive->capacity = drive->cyl * drive->head * drive->sect;
@@ -1181,7 +1184,7 @@ static void init_idedisk_capacity (ide_d

static sector_t idedisk_capacity (ide_drive_t *drive)
{
- if (drive->id->cfs_enable_2 & 0x0400)
+ if (idedisk_supports_lba48(drive->id))
return (drive->capacity48 - drive->sect0);
return (drive->capacity - drive->sect0);
}
@@ -1472,7 +1475,7 @@ static int probe_lba_addressing (ide_dri
if (HWIF(drive)->addressing)
return 0;

- if (!(drive->id->cfs_enable_2 & 0x0400))
+ if (!idedisk_supports_lba48(drive->id))
return -EIO;
drive->addressing = arg;
return 0;
@@ -1642,19 +1645,28 @@ static void idedisk_setup (ide_drive_t *
* by correcting bios_cyls:
*/
capacity = idedisk_capacity (drive);
- if (!drive->forced_geom && drive->bios_sect && drive->bios_head) {
- unsigned int cap0 = capacity; /* truncate to 32 bits */
- unsigned int cylsz, cyl;
-
- if (cap0 != capacity)
- drive->bios_cyl = 65535;
- else {
- cylsz = drive->bios_sect * drive->bios_head;
- cyl = cap0 / cylsz;
- if (cyl > 65535)
- cyl = 65535;
- if (cyl > drive->bios_cyl)
- drive->bios_cyl = cyl;
+ if (!drive->forced_geom) {
+
+ if (idedisk_supports_lba48(drive->id)) {
+ /* compatibility */
+ drive->bios_sect = 63;
+ drive->bios_head = 255;
+ }
+
+ if (drive->bios_sect && drive->bios_head) {
+ unsigned int cap0 = capacity; /* truncate to 32 bits */
+ unsigned int cylsz, cyl;
+
+ if (cap0 != capacity)
+ drive->bios_cyl = 65535;
+ else {
+ cylsz = drive->bios_sect * drive->bios_head;
+ cyl = cap0 / cylsz;
+ if (cyl > 65535)
+ cyl = 65535;
+ if (cyl > drive->bios_cyl)
+ drive->bios_cyl = cyl;
+ }
}
}
printk(KERN_INFO "%s: %llu sectors (%llu MB)",

_

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/