On Sun, Aug 03, 2003 at 06:23:13PM -0400, Diffie wrote:
> On Sun, Aug 03, 2003 at 02:52:11PM -0700, Andrew Morton wrote:
> > Diffie <diffie@blazebox.homeip.net> wrote:
> > >
> > > I think this bug is due to me using the aic7xxx_old code ver 5.x.x.
> > >
> > > Under kernel 2.4.21 the aic7xxx (new) is ver 6.2.8 and it works great
> > > with Adaptec AHA-2940U2W controller i have.
> > >
> > > On 2.6.0-test2-mm3 (tried Linus test1,test2,mm1 and mm2) the NEW aic7xxx
> > > uses ver 6.2.35 and will not scan my IBM drive even though it
> > > initializes the correct SCSI ID,LUN etc...
> > >
> > > I would like to contact and report this issue to the aic7xxx maintaner
> > > and perhaps get it resolved.Where would be the best place to report this
> > > kind of problem?
> > >
> > > I have taken few screen captures which are available at:
> > > http://www.blazebox.homeip.net:81/diffie/images/2.6.0-test2/ and show
> > > the aic7xxx (new) failure.
> >
> > An appropriate way to report this would be to email Justin (CC'ed here)
> > and linux-scsi@vger.kernel.org.
> >
> >
>
> Andrew,
>
> Thank you for all your help.Sorry but i gave the wrong URL in previous
> email.The correct one is http://www.blazebox.homeip.net:81/diffie/images/linux-2.6.0-test2/
>
> Attached is the dmesg,lspci and aic7xxx /proc information from 2.4.21
> kernel.
>
> Regards,
>
> Paul B.
>
I am sorry again for not including the attachement.
This archive was generated by hypermail 2b29 : Thu Aug 07 2003 - 22:00:22 EST