On Thu, 31 Jul 2003, Marcelo Penna Guerra wrote:
> Hi,
Hi,
> I don't know if anyone is working on this, but I merged the changes from
> siimage 1.06 present in 2.4.x to 2.6.0-test2. I'm really not very familiar
> with the IDE code, so it's probably a good idea if someone could take a look
> at it. All I can tell is it's working with the SiI3112A present in my
> motherboard and it's a lot more stable than before.
Thanks, I'll take a look.
What do you mean by "a lot more stable than before"?
> I also added the suggestion from Andre to make the driver not care about cable
> detection and found a possible bug in the 2.4.x code.
Can you separate your changes from forward-port?
> In 2.4.22-pre9:
>
> if (!is_sata(hwif))
> hwif->atapi_dma = 1;
>
> and DMA is not enabled by default.
This means that if this is a SATA controller DMA shouldn't be
enabled on ATAPI devices. There are probably some reasons to do this.
> I think it should be:
>
> if (is_sata(hwif))
> hwif->atapi_dma = 1;
>
> With this DMA is enabled by default on my board and works great.
Are you aware of side effect?
[ Disabling DMA on ATAPI devices on SiI680. ]
Please consult this change with Alan :-).
> Marcelo Penna Guerra
Regards,
-- Bartlomiej- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Jul 31 2003 - 22:00:50 EST