Re: Zio! compactflash doesn't work

From: Greg KH (greg@kroah.com)
Date: Wed Jul 30 2003 - 18:17:53 EST


On Tue, Jul 29, 2003 at 05:07:05PM -0500, Grant Miner wrote:
> I have a Microtech CompactFlash ZiO! USB
>
> cat /proc/bus/usb/devices
> T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 8 Spd=12 MxCh= 0
> D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
> P: Vendor=04e6 ProdID=1010 Rev= 0.05
> S: Manufacturer=SHUTTLE
> S: Product=SCM Micro USBAT-02
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=ff Driver=(none)
> E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=5ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>
> but it does not show up in /dev; this is in 2.6.0-pre1. (It never
> worked in 2.4 either.) config is attached. Any ideas?

Linux doesn't currently support this device, sorry.

greg k-h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Jul 31 2003 - 22:00:48 EST