2.6.0-test2: SATA errors, not usable

From: Ricardo Galli (gallir@uib.es)
Date: Wed Jul 30 2003 - 07:24:36 EST

I'm testing SATA with 2.6.0-test2 with a Intel P4 i875P chipset. The disk is
recognised correcly, but right after trying any kind of access (hdparm,
fdisk...) it starts to give the following errors:

...
ICH5-SATA: IDE controller at PCI slot 0000:00:1f.2
ICH5-SATA: chipset revision 2
ICH5-SATA: 100% native mode on irq 18
    ide2: BM-DMA at 0xef90-0xef97, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0xef98-0xef9f, BIOS settings: hdg:pio, hdh:pio
hde: ST380013AS, ATA DISK drive
...
hde: max request size: 1024KiB
hde: host protected area => 1
hde: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=9729/255/63, UDMA(33)
 hde: hde1
...
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x40 { UncorrectableError }, LBAsect=70, high=0, low=70,
sector=0
end_request: I/O error, dev hde, sector 0
Buffer I/O error on device hde, logical block 0
Buffer I/O error on device hde, logical block 1
Buffer I/O error on device hde, logical block 2
...

I tried it with 2.4.21 and 2.4.22-pre9 with the same results.
Also changed the BIOS to put in "compatible mode" (as opposite to sata native)
and got the same errors.

In all cases, the disk is unusable (a seagate barracuda 80GB).

Regards, 

-- 
  ricardo galli       GPG id C8114D34
  http://mnm.uib.es/~gallir/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Thu Jul 31 2003 - 22:00:45 EST