The patch below against 2.6.0-test2 does the following:
- let all drivers that don't compile depend on an undefined
CONFIG_BROKEN
- let all drivers that don't compile on SMP (due to cli/sti usage)
depend on a CONFIG_BROKEN_ON_SMP that is only defined if !CONFIG_SMP
Notes:
- I might have missed a few drivers, I found the drivers below by trying
to compile as many drivers as possible statically on i386
- I added in two drivers an #include <linux/interrupt.h> for the dummy
cli/sti #define's on !SMP to allow the compilation on UP
- as an example I converted the CONFIG_BLK_DEV_IDETAPE entry from a
dep_tristate comment to a full Kconfig entry with a dependency on
CONFIG_BROKEN (help text stolen from 2.4)
- I do prefer BROKEN, Alan prefers OBSOLETE
a s/BROKEN/OBSOLETE/g is acceptable for me
I'm not sure whether now or later in the 2.6.0-test phase is the right
time to apply this patch.
diffstat output:
drivers/atm/Kconfig | 4 ++--
drivers/cdrom/Kconfig | 8 ++++----
drivers/char/Kconfig | 31 ++++++++++++++++---------------
drivers/char/epca.c | 1 +
drivers/char/generic_serial.c | 1 +
drivers/i2c/Kconfig | 2 +-
drivers/ide/Kconfig | 26 +++++++++++++++++++++++++-
drivers/isdn/Kconfig | 2 +-
drivers/isdn/hardware/avm/Kconfig | 12 ++++++------
drivers/isdn/hisax/Kconfig | 2 ++
drivers/isdn/i4l/Kconfig | 1 +
drivers/media/video/Kconfig | 4 ++--
drivers/mtd/devices/Kconfig | 2 +-
drivers/net/Kconfig | 16 ++++++++--------
drivers/net/hamradio/Kconfig | 6 +++---
drivers/net/irda/Kconfig | 2 +-
drivers/net/tulip/Kconfig | 2 +-
drivers/net/wan/Kconfig | 8 ++++----
drivers/scsi/Kconfig | 20 ++++++++++----------
drivers/video/Kconfig | 6 +++---
fs/partitions/Kconfig | 1 +
init/Kconfig | 4 ++++
sound/oss/Kconfig | 2 +-
23 files changed, 99 insertions(+), 64 deletions(-)
cu
Adrian
--- linux-2.6.0-test2-full/drivers/net/tulip/Kconfig.old 2003-07-29 10:09:53.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/net/tulip/Kconfig 2003-07-29 10:10:34.000000000 +0200
@@ -131,7 +131,7 @@
config PCMCIA_XIRTULIP
tristate "Xircom Tulip-like CardBus support (old driver)"
- depends on NET_TULIP && CARDBUS
+ depends on NET_TULIP && CARDBUS && BROKEN_ON_SMP
---help---
This driver is for the Digital "Tulip" Ethernet CardBus adapters.
It should work with most DEC 21*4*-based chips/ethercards, as well
--- linux-2.6.0-test2-full/drivers/net/irda/Kconfig.old 2003-07-29 09:39:46.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/net/irda/Kconfig 2003-07-29 09:40:19.000000000 +0200
@@ -270,7 +270,7 @@
config TOSHIBA_OLD
tristate "Toshiba Type-O IR Port (old driver)"
- depends on IRDA
+ depends on IRDA && BROKEN_ON_SMP
help
Say Y here if you want to build support for the Toshiba Type-O IR
chipset. This chipset is used by the Toshiba Libretto 100CT, and
--- linux-2.6.0-test2-full/drivers/net/wan/Kconfig.old 2003-07-28 22:23:19.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/net/wan/Kconfig 2003-07-29 10:11:46.000000000 +0200
@@ -63,7 +63,7 @@
# Not updated to 2.6.
config COMX
tristate "MultiGate (COMX) synchronous serial boards support"
- depends on WAN && (ISA || PCI) && OBSOLETE
+ depends on WAN && (ISA || PCI) && BROKEN
---help---
Say Y if you want to use any board from the MultiGate (COMX) family.
These boards are synchronous serial adapters for the PC,
@@ -443,7 +443,7 @@
config SDLA
tristate "SDLA (Sangoma S502/S508) support"
- depends on DLCI && ISA
+ depends on DLCI && ISA && BROKEN_ON_SMP
help
Say Y here if you need a driver for the Sangoma S502A, S502E, and
S508 Frame Relay Access Devices. These are multi-protocol cards, but
@@ -476,7 +476,7 @@
config VENDOR_SANGOMA
tristate "Sangoma WANPIPE(tm) multiprotocol cards"
- depends on WAN_ROUTER_DRIVERS && WAN_ROUTER && (PCI || ISA)
+ depends on WAN_ROUTER_DRIVERS && WAN_ROUTER && (PCI || ISA) && BROKEN
---help---
WANPIPE from Sangoma Technologies Inc. (<http://www.sangoma.com/>)
is a family of intelligent multiprotocol WAN adapters with data
@@ -625,7 +625,7 @@
config X25_ASY
tristate "X.25 async driver (EXPERIMENTAL)"
- depends on WAN && LAPB && X25
+ depends on WAN && LAPB && X25 && BROKEN_ON_SMP
---help---
This is a driver for sending and receiving X.25 frames over regular
asynchronous serial lines such as telephone lines equipped with
--- linux-2.6.0-test2-full/drivers/net/hamradio/Kconfig.old 2003-07-29 09:27:25.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/net/hamradio/Kconfig 2003-07-29 09:39:25.000000000 +0200
@@ -1,6 +1,6 @@
config MKISS
tristate "Serial port KISS driver"
- depends on AX25
+ depends on AX25 && BROKEN_ON_SMP
---help---
KISS is a protocol used for the exchange of data between a computer
and a Terminal Node Controller (a small embedded system commonly
@@ -19,7 +19,7 @@
config 6PACK
tristate "Serial port 6PACK driver"
- depends on AX25
+ depends on AX25 && BROKEN_ON_SMP
---help---
6pack is a transmission protocol for the data exchange between your
PC and your TNC (the Terminal Node Controller acts as a kind of
@@ -49,7 +49,7 @@
config DMASCC
tristate "High-speed (DMA) SCC driver for AX.25"
- depends on ISA && AX25
+ depends on ISA && AX25 && BROKEN_ON_SMP
---help---
This is a driver for high-speed SCC boards, i.e. those supporting
DMA on one port. You usually use those boards to connect your
--- linux-2.6.0-test2-full/drivers/net/Kconfig.old 2003-07-28 22:23:19.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/net/Kconfig 2003-07-29 10:31:28.000000000 +0200
@@ -400,7 +400,7 @@
config MVME16x_NET
tristate "MVME16x Ethernet support"
- depends on NETDEVICES && MVME16x
+ depends on NETDEVICES && MVME16x && BROKEN_ON_SMP
help
This is the driver for the Ethernet interface on the Motorola
MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
@@ -409,7 +409,7 @@
config BVME6000_NET
tristate "BVME6000 Ethernet support"
- depends on NETDEVICES && BVME6000
+ depends on NETDEVICES && BVME6000 && BROKEN_ON_SMP
help
This is the driver for the Ethernet interface on BVME4000 and
BVME6000 VME boards. Say Y here to include the driver for this chip
@@ -704,7 +704,7 @@
config ELMC_II
tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
- depends on NET_VENDOR_3COM && MCA && EXPERIMENTAL
+ depends on NET_VENDOR_3COM && MCA && EXPERIMENTAL && BROKEN_ON_SMP
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -882,7 +882,7 @@
config NI5010
tristate "NI5010 support (EXPERIMENTAL)"
- depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL
+ depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -1221,7 +1221,7 @@
config SKMC
tristate "SKnet MCA support"
- depends on NET_ETHERNET && MCA
+ depends on NET_ETHERNET && MCA && BROKEN
---help---
These are Micro Channel Ethernet adapters. You need to say Y to "MCA
support" in order to use this driver. Supported cards are the SKnet
@@ -1350,7 +1350,7 @@
config APRICOT
tristate "Apricot Xen-II on board Ethernet"
- depends on NET_PCI && ISA
+ depends on NET_PCI && ISA && BROKEN_ON_SMP
help
If you have a network (Ethernet) controller of this type, say Y and
read the Ethernet-HOWTO, available from
@@ -2144,7 +2144,7 @@
config DEFXX
tristate "Digital DEFEA and DEFPA adapter support"
- depends on FDDI && (PCI || EISA)
+ depends on FDDI && (PCI || EISA) && BROKEN
help
This is support for the DIGITAL series of EISA (DEFEA) and PCI
(DEFPA) controllers which can connect you to a local FDDI network.
@@ -2487,7 +2487,7 @@
config IPHASE5526
tristate "Interphase 5526 Tachyon chipset based adapter support"
- depends on NET_FC && SCSI && PCI
+ depends on NET_FC && SCSI && PCI && BROKEN
help
Say Y here if you have a Fibre Channel adaptor of this kind.
--- linux-2.6.0-test2-full/drivers/i2c/Kconfig.old 2003-07-29 00:58:38.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/i2c/Kconfig 2003-07-29 00:59:05.000000000 +0200
@@ -152,7 +152,7 @@
config I2C_ELEKTOR
tristate "Elektor ISA card"
- depends on I2C_ALGOPCF
+ depends on I2C_ALGOPCF && BROKEN_ON_SMP
help
This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
such an adapter.
--- linux-2.6.0-test2-full/drivers/video/Kconfig.old 2003-07-28 22:23:20.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/video/Kconfig 2003-07-28 22:25:21.000000000 +0200
@@ -40,7 +40,7 @@
config FB_CIRRUS
tristate "Cirrus Logic support"
- depends on FB && (AMIGA || PCI)
+ depends on FB && (AMIGA || PCI) && BROKEN
---help---
This enables support for Cirrus Logic GD542x/543x based boards on
Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
@@ -55,7 +55,7 @@
config FB_PM2
tristate "Permedia2 support"
- depends on FB && (AMIGA || PCI)
+ depends on FB && (AMIGA || PCI) && BROKEN
help
This is the frame buffer device driver for the Permedia2 AGP frame
buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
@@ -802,7 +802,7 @@
config FB_PM3
tristate "Permedia3 support"
- depends on FB && PCI
+ depends on FB && PCI && BROKEN
help
This is the frame buffer device driver for the 3DLabs Permedia3
chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
--- linux-2.6.0-test2-full/drivers/isdn/hardware/avm/Kconfig.old 2003-07-29 01:57:44.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/isdn/hardware/avm/Kconfig 2003-07-29 01:58:59.000000000 +0200
@@ -12,13 +12,13 @@
config ISDN_DRV_AVMB1_B1ISA
tristate "AVM B1 ISA support"
- depends on CAPI_AVM && ISDN_CAPI && ISA
+ depends on CAPI_AVM && ISDN_CAPI && ISA && BROKEN_ON_SMP
help
Enable support for the ISA version of the AVM B1 card.
config ISDN_DRV_AVMB1_B1PCI
tristate "AVM B1 PCI support"
- depends on CAPI_AVM && ISDN_CAPI && PCI
+ depends on CAPI_AVM && ISDN_CAPI && PCI && BROKEN_ON_SMP
help
Enable support for the PCI version of the AVM B1 card.
@@ -30,14 +30,14 @@
config ISDN_DRV_AVMB1_T1ISA
tristate "AVM T1/T1-B ISA support"
- depends on CAPI_AVM && ISDN_CAPI && ISA
+ depends on CAPI_AVM && ISDN_CAPI && ISA && BROKEN_ON_SMP
help
Enable support for the AVM T1 T1B card.
Note: This is a PRI card and handle 30 B-channels.
config ISDN_DRV_AVMB1_B1PCMCIA
tristate "AVM B1/M1/M2 PCMCIA support"
- depends on CAPI_AVM && ISDN_CAPI
+ depends on CAPI_AVM && ISDN_CAPI && BROKEN_ON_SMP
help
Enable support for the PCMCIA version of the AVM B1 card.
@@ -50,14 +50,14 @@
config ISDN_DRV_AVMB1_T1PCI
tristate "AVM T1/T1-B PCI support"
- depends on CAPI_AVM && ISDN_CAPI && PCI
+ depends on CAPI_AVM && ISDN_CAPI && PCI && BROKEN_ON_SMP
help
Enable support for the AVM T1 T1B card.
Note: This is a PRI card and handle 30 B-channels.
config ISDN_DRV_AVMB1_C4
tristate "AVM C4/C2 support"
- depends on CAPI_AVM && ISDN_CAPI && PCI
+ depends on CAPI_AVM && ISDN_CAPI && PCI && BROKEN_ON_SMP
help
Enable support for the AVM C4/C2 PCI cards.
These cards handle 4/2 BRI ISDN lines (8/4 channels).
--- linux-2.6.0-test2-full/drivers/isdn/i4l/Kconfig.old 2003-07-28 22:23:20.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/isdn/i4l/Kconfig 2003-07-28 22:25:21.000000000 +0200
@@ -106,6 +106,7 @@
config ISDN_DIVERSION
tristate "Support isdn diversion services"
+ depends on BROKEN
help
This option allows you to use some supplementary diversion
services in conjunction with the HiSax driver on an EURO/DSS1
--- linux-2.6.0-test2-full/drivers/isdn/hisax/Kconfig.old 2003-07-28 22:23:20.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/isdn/hisax/Kconfig 2003-07-28 22:25:21.000000000 +0200
@@ -165,6 +165,7 @@
config HISAX_DIEHLDIVA
bool "Eicon.Diehl Diva cards"
+ depends on !ISAPNP || BROKEN
help
This enables HiSax support for the Eicon.Diehl Diva none PRO
versions passive ISDN cards.
@@ -207,6 +208,7 @@
config HISAX_SEDLBAUER
bool "Sedlbauer cards"
+ depends on !ISAPNP || BROKEN
help
This enables HiSax support for the Sedlbauer passive ISDN cards.
--- linux-2.6.0-test2-full/drivers/isdn/Kconfig.old 2003-07-29 01:50:25.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/isdn/Kconfig 2003-07-29 01:50:48.000000000 +0200
@@ -22,7 +22,7 @@
menu "Old ISDN4Linux"
- depends on NET && ISDN_BOOL
+ depends on NET && ISDN_BOOL && BROKEN_ON_SMP
config ISDN
tristate "Old ISDN4Linux (obsolete)"
--- linux-2.6.0-test2-full/drivers/media/video/Kconfig.old 2003-07-28 22:23:20.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/media/video/Kconfig 2003-07-28 22:25:21.000000000 +0200
@@ -161,7 +161,7 @@
config VIDEO_ZORAN
tristate "Zoran ZR36057/36060 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C
+ depends on VIDEO_DEV && PCI && I2C && BROKEN
help
Say Y here to include support for video cards based on the Zoran
ZR36057/36060 encoder/decoder chip (including the Iomega Buz and the
@@ -190,7 +190,7 @@
config VIDEO_ZR36120
tristate "Zoran ZR36120/36125 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C
+ depends on VIDEO_DEV && PCI && I2C && BROKEN
help
Support for ZR36120/ZR36125 based frame grabber/overlay boards.
This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
--- linux-2.6.0-test2-full/drivers/char/epca.c.old 2003-07-28 22:23:20.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/char/epca.c 2003-07-28 22:25:21.000000000 +0200
@@ -40,6 +40,7 @@
#include <linux/tty_flip.h>
#include <linux/slab.h>
#include <linux/ioport.h>
+#include <linux/interrupt.h>
#include <asm/uaccess.h>
#include <asm/io.h>
--- linux-2.6.0-test2-full/drivers/char/Kconfig.old 2003-07-28 22:23:21.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/char/Kconfig 2003-07-29 00:50:26.000000000 +0200
@@ -78,7 +78,7 @@
config COMPUTONE
tristate "Computone IntelliPort Plus serial support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
---help---
This driver supports the entire family of Intelliport II/Plus
controllers with the exception of the MicroChannel controllers and
@@ -111,7 +111,7 @@
config CYCLADES
tristate "Cyclades async mux support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
---help---
This is a driver for a card that gives you many serial ports. You
would need something like this to connect more than two modems to
@@ -143,7 +143,7 @@
config DIGIEPCA
tristate "Digiboard Intelligent Async Support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
---help---
This is a driver for Digi International's Xx, Xeve, and Xem series
of cards which provide multiple serial ports. You would need
@@ -162,7 +162,7 @@
config DIGI
tristate "Digiboard PC/Xx Support"
- depends on SERIAL_NONSTANDARD && DIGIEPCA=n
+ depends on SERIAL_NONSTANDARD && DIGIEPCA=n && BROKEN
help
This is a driver for the Digiboard PC/Xe, PC/Xi, and PC/Xeve cards
that give you many serial ports. You would need something like this
@@ -175,7 +175,7 @@
config ESPSERIAL
tristate "Hayes ESP serial port support"
- depends on SERIAL_NONSTANDARD && ISA
+ depends on SERIAL_NONSTANDARD && ISA && BROKEN
help
This is a driver which supports Hayes ESP serial ports. Both single
port cards and multiport cards are supported. Make sure to read
@@ -188,7 +188,7 @@
config MOXA_INTELLIO
tristate "Moxa Intellio support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
help
Say Y here if you have a Moxa Intellio multiport serial card.
@@ -199,7 +199,7 @@
config MOXA_SMARTIO
tristate "Moxa SmartIO support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
help
Say Y here if you have a Moxa SmartIO multiport serial card.
@@ -260,7 +260,7 @@
config RISCOM8
tristate "SDL RISCom/8 card support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN
help
This is a driver for the SDL Communications RISCom/8 multiport card,
which gives you many serial ports. You would need something like
@@ -273,7 +273,7 @@
config SPECIALIX
tristate "Specialix IO8+ card support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN
help
This is a driver for the Specialix IO8+ multiport card (both the
ISA and the PCI version) which gives you many serial ports. You
@@ -297,7 +297,7 @@
config SX
tristate "Specialix SX (and SI) card support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
help
This is a driver for the SX and SI multiport serial cards.
Please read the file <file:Documentation/sx.txt> for details.
@@ -308,7 +308,7 @@
config RIO
tristate "Specialix RIO system support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
help
This is a driver for the Specialix RIO, a smart serial card which
drives an outboard box that can support up to 128 ports. Product
@@ -337,7 +337,7 @@
config STALLION
tristate "Stallion EasyIO or EC8/32 support"
- depends on STALDRV
+ depends on STALDRV && BROKEN
help
If you have an EasyIO or EasyConnection 8/32 multiport Stallion
card, then this is for you; say Y. Make sure to read
@@ -350,7 +350,7 @@
config ISTALLION
tristate "Stallion EC8/64, ONboard, Brumby support"
- depends on STALDRV
+ depends on STALDRV && BROKEN
help
If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
serial multiport card, say Y here. Make sure to read
@@ -363,7 +363,7 @@
config SERIAL_TX3912
bool "TMPTX3912/PR31700 serial port support"
- depends on SERIAL_NONSTANDARD && MIPS
+ depends on SERIAL_NONSTANDARD && MIPS && BROKEN_ON_SMP
help
The TX3912 is a Toshiba RISC processor based o the MIPS 3900 core;
see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
@@ -423,7 +423,7 @@
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && ZORRO
+ depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP
---help---
This option supports the 2232 7-port serial card shipped with the
Amiga 2000 and other Zorro-bus machines, dating from 1989. At
@@ -907,6 +907,7 @@
config FTAPE
tristate "Ftape (QIC-80/Travan) support"
+ depends on BROKEN_ON_SMP
---help---
If you have a tape drive that is connected to your floppy
controller, say Y here.
--- linux-2.6.0-test2-full/drivers/char/generic_serial.c.old 2003-07-28 22:23:21.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/char/generic_serial.c 2003-07-28 22:25:21.000000000 +0200
@@ -25,6 +25,7 @@
#include <linux/serial.h>
#include <linux/mm.h>
#include <linux/generic_serial.h>
+#include <linux/interrupt.h>
#include <asm/semaphore.h>
#include <asm/uaccess.h>
--- linux-2.6.0-test2-full/drivers/scsi/Kconfig.old 2003-07-28 22:23:21.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/scsi/Kconfig 2003-07-29 10:57:31.000000000 +0200
@@ -355,7 +355,7 @@
# All the I2O code and drivers do not seem to be 64bit safe.
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
- depends on !X86_64 && SCSI
+ depends on !X86_64 && SCSI && BROKEN
help
This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
@@ -398,7 +398,7 @@
# does not use pci dma and seems to be onboard only for old machines
config SCSI_AM53C974
tristate "AM53/79C974 PCI SCSI support"
- depends on X86 && PCI && SCSI
+ depends on X86 && PCI && SCSI && BROKEN
---help---
This is support for the AM53/79C974 SCSI host adapters. Please read
<file:Documentation/scsi/AM53C974.txt> for details. Also, the
@@ -455,7 +455,7 @@
config SCSI_CPQFCTS
tristate "Compaq Fibre Channel 64-bit/66Mhz HBA support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && BROKEN
help
Say Y here to compile in support for the Compaq StorageWorks Fibre
Channel 64-bit/66Mhz Host Bus Adapter.
@@ -626,7 +626,7 @@
config SCSI_GENERIC_NCR5380_MMIO
tristate "Generic NCR5380/53c400 SCSI MMIO support"
- depends on ISA && SCSI
+ depends on ISA && SCSI && (BROKEN || !SCSI_GENERIC_NCR5380)
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
on boards using memory mapped I/O.
@@ -742,7 +742,7 @@
config SCSI_INITIO
tristate "Initio 9100U(W) support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && BROKEN
help
This is support for the Initio 91XXU(W) SCSI host adapter. Please
read the SCSI-HOWTO, available from
@@ -1161,7 +1161,7 @@
config SCSI_MCA_53C9X
tristate "NCR MCA 53C9x SCSI support"
- depends on MCA && SCSI
+ depends on MCA && SCSI && BROKEN_ON_SMP
help
Some MicroChannel machines, notably the NCR 35xx line, use a SCSI
controller based on the NCR 53C94. This driver will allow use of
@@ -1189,7 +1189,7 @@
config SCSI_PCI2000
tristate "PCI2000 support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && BROKEN
help
This is support for the PCI2000I EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
@@ -1202,7 +1202,7 @@
config SCSI_PCI2220I
tristate "PCI2220i support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && BROKEN
help
This is support for the PCI2220i EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
@@ -1314,7 +1314,7 @@
config SCSI_SEAGATE
tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
- depends on X86 && ISA && SCSI
+ depends on X86 && ISA && SCSI && BROKEN
---help---
These are 8-bit SCSI controllers; the ST-01 is also supported by
this driver. It is explained in section 3.9 of the SCSI-HOWTO,
@@ -1381,7 +1381,7 @@
config SCSI_DC390T
tristate "Tekram DC390(T) and Am53/79C974 SCSI support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && BROKEN
---help---
This driver supports PCI SCSI host adapters based on the Am53C974A
chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
--- linux-2.6.0-test2-full/drivers/mtd/devices/Kconfig.old 2003-07-28 22:23:21.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/mtd/devices/Kconfig 2003-07-28 22:25:21.000000000 +0200
@@ -102,7 +102,7 @@
config MTD_BLKMTD
tristate "MTD emulation using block device"
- depends on MTD
+ depends on MTD && BROKEN
help
This driver allows a block device to appear as an MTD. It would
generally be used in the following cases:
--- linux-2.6.0-test2-full/drivers/ide/Kconfig.old 2003-07-28 22:23:21.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/ide/Kconfig 2003-07-28 22:25:21.000000000 +0200
@@ -213,7 +213,31 @@
say M here and read <file:Documentation/modules.txt>. The module
will be called ide-cd.
-#dep_tristate ' Include IDE/ATAPI TAPE support' CONFIG_BLK_DEV_IDETAPE $CONFIG_BLK_DEV_IDE
+config BLK_DEV_IDETAPE
+ tristate "Include IDE/ATAPI TAPE support"
+ depends on BLK_DEV_IDE && BROKEN
+ help
+ If you have an IDE tape drive using the ATAPI protocol, say Y.
+ ATAPI is a newer protocol used by IDE tape and CD-ROM drives,
+ similar to the SCSI protocol. If you have an SCSI tape drive
+ however, you can say N here.
+
+ You should also say Y if you have an OnStream DI-30 tape drive; this
+ will not work with the SCSI protocol, until there is support for the
+ SC-30 and SC-50 versions.
+
+ If you say Y here, the tape drive will be identified at boot time
+ along with other IDE devices, as "hdb" or "hdc", or something
+ similar, and will be mapped to a character device such as "ht0"
+ (check the boot messages with dmesg). Be sure to consult the
+ <file:drivers/ide/ide-tape.c> and <file:Documentation/ide.txt> files
+ for usage information.
+
+ If you want to compile the driver as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/modules.txt>. The module
+ will be called ide-tape.o.
+
config BLK_DEV_IDEFLOPPY
tristate "Include IDE/ATAPI FLOPPY support"
depends on BLK_DEV_IDE
--- linux-2.6.0-test2-full/drivers/atm/Kconfig.old 2003-07-29 00:07:40.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/atm/Kconfig 2003-07-29 00:08:56.000000000 +0200
@@ -145,7 +145,7 @@
config ATM_ZATM
tristate "ZeitNet ZN1221/ZN1225"
- depends on PCI && ATM
+ depends on PCI && ATM && BROKEN_ON_SMP
help
Driver for the ZeitNet ZN1221 (MMF) and ZN1225 (UTP-5) 155 Mbps ATM
adapters.
@@ -253,7 +253,7 @@
config ATM_AMBASSADOR
tristate "Madge Ambassador (Collage PCI 155 Server)"
- depends on PCI && ATM
+ depends on PCI && ATM && BROKEN_ON_SMP
help
This is a driver for ATMizer based ATM card produced by Madge
Networks Ltd. Say Y (or M to compile as a module named ambassador)
--- linux-2.6.0-test2-full/drivers/cdrom/Kconfig.old 2003-07-29 00:22:00.000000000 +0200
+++ linux-2.6.0-test2-full/drivers/cdrom/Kconfig 2003-07-29 00:28:11.000000000 +0200
@@ -74,7 +74,7 @@
config SBPCD
tristate "Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support"
- depends on CD_NO_IDESCSI
+ depends on CD_NO_IDESCSI && BROKEN_ON_SMP
---help---
This driver supports most of the drives which use the Panasonic or
Sound Blaster interface. Please read the file
@@ -199,7 +199,7 @@
config CM206
tristate "Philips/LMS CM206 CDROM support"
- depends on CD_NO_IDESCSI
+ depends on CD_NO_IDESCSI && BROKEN_ON_SMP
---help---
If you have a Philips/LMS CD-ROM drive cm206 in combination with a
cm260 host adapter card, say Y here. Please also read the file
@@ -245,7 +245,7 @@
config CDU31A
tristate "Sony CDU31A/CDU33A CDROM support"
- depends on CD_NO_IDESCSI
+ depends on CD_NO_IDESCSI && BROKEN_ON_SMP
---help---
These CD-ROM drives have a spring-pop-out caddyless drawer, and a
rectangular green LED centered beneath it. NOTE: these CD-ROM
@@ -267,7 +267,7 @@
config CDU535
tristate "Sony CDU535 CDROM support"
- depends on CD_NO_IDESCSI
+ depends on CD_NO_IDESCSI && BROKEN_ON_SMP
---help---
This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM
drives. Please read the file <file:Documentation/cdrom/sonycd535>.
--- linux-2.6.0-test2-full/fs/partitions/Kconfig.old 2003-07-28 22:23:21.000000000 +0200
+++ linux-2.6.0-test2-full/fs/partitions/Kconfig 2003-07-28 22:25:22.000000000 +0200
@@ -29,6 +29,7 @@
config ACORN_PARTITION_EESOX
bool "EESOX partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+ depends on BROKEN
default y if !PARTITION_ADVANCED && ARCH_ACORN
config ACORN_PARTITION_ICS
--- linux-2.6.0-test2-full/sound/oss/Kconfig.old 2003-07-28 22:23:21.000000000 +0200
+++ linux-2.6.0-test2-full/sound/oss/Kconfig 2003-07-28 22:25:22.000000000 +0200
@@ -912,7 +912,7 @@
config SOUND_AWE32_SYNTH
tristate "AWE32 synth"
- depends on SOUND_OSS
+ depends on SOUND_OSS && (!ISAPNP || BROKEN)
help
Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
similar sound card. See <file:Documentation/sound/oss/README.awe>,
--- linux-2.6.0-test2-full/init/Kconfig.old 2003-07-28 22:23:22.000000000 +0200
+++ linux-2.6.0-test2-full/init/Kconfig 2003-07-29 10:14:28.000000000 +0200
@@ -34,6 +34,10 @@
endmenu
+config BROKEN_ON_SMP
+ bool
+ depends on BROKEN || !SMP
+ default y
menu "General setup"
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Jul 31 2003 - 22:00:42 EST