Hello all,
First someone pointed me at the driver available through
http://w1.894.telia.com/~u89404340/touchpad/index.html
I hadn't known about this, but I implemented it. It does not work
for me under either the 2.6.0-test1-ac2 kernel or the kernel I was
using before (2.4.21-pre6).
Output from the startx is:
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.0-test1-ac1 i686 [ELF]
Build Date: 23 July 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Jul 23 08:01:03 2003
(==) Using config file: "/etc/X11/XF86Config"
[10e] 320 x 200, 70Hz
[111] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz
[114] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz
[117] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz
[11a] 1280 x 1024, 60Hz, 75Hz
[11d] 640 x 400, 70Hz
[122] 1600 x 1200, 60Hz
[133] 320 x 240, 72Hz
[13c] 1400 x 1050, 60Hz, 75Hz
[143] 400 x 300, 72Hz
[153] 512 x 384, 70Hz
[173] 720 x 480, 75Hz
[17e] 720 x 576, 75Hz
auto-dev: Found Synaptics in /proc/bus/input/devices
auto-dev: Found its handler entry
auto-dev: cannot find the event-device in the handlers-entry for the Synaptics touchpad hardware. Falling back to psaux protocol and the Device Option from XF86Config.
Query no Synaptics: 6003C8
(EE) Mouse[1] no synaptics touchpad detected and no repeater device
(EE) Mouse[1] Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "Mouse[1]"
No core pointer
Fatal server error:
failed to initialize core devices
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
On Thu, 24 Jul 2003 23:24:16 +0200, Petr Vandrovec wrote:
> On Thu, Jul 24, 2003 at 10:27:51PM +0200, Michael Schierl wrote:
> > David Benfell <benfell@greybeard95a.com> wrote:
> >
> > However, giving 'psmouse_noext' as kernel param helped for me to make
> > the touchpad work (using /dev/input/mice (protocol autops2) as source
> > for gpm and gpm repeater as source for x, as I did in 2.4.x kernels).
> >
No joy here, either:
[Using /dev/input/mouse as the input device]
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.0-test1-ac1 i686 [ELF]
Build Date: 23 July 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Jul 23 09:25:40 2003
(==) Using config file: "/etc/X11/XF86Config"
[10e] 320 x 200, 70Hz
[111] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz
[114] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz
[117] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz
[11a] 1280 x 1024, 60Hz, 75Hz
[11d] 640 x 400, 70Hz
[122] 1600 x 1200, 60Hz
[133] 320 x 240, 72Hz
[13c] 1400 x 1050, 60Hz, 75Hz
[143] 400 x 300, 72Hz
[153] 512 x 384, 70Hz
[173] 720 x 480, 75Hz
[17e] 720 x 576, 75Hz
auto-dev: Could not find N: Name="Synaptics Synaptics TouchPad" and its handler entry H: Handlers= in /proc/bus/input/devices. So we are unable to auto-determine the synaptics touchpad device, falling back to psaux protocol and the Device Option.
(EE) xf86OpenSerial: Cannot open device /dev/input/mouse
No such file or directory.
Synaptics driver unable to open device
(EE) PreInit failed for input device "Mouse[1]"
No core pointer
Fatal server error:
failed to initialize core devices
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
[Using /dev/psaux as the input device]
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.0-test1-ac1 i686 [ELF]
Build Date: 23 July 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Jul 23 09:22:03 2003
(==) Using config file: "/etc/X11/XF86Config"
[10e] 320 x 200, 70Hz
[111] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz
[114] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz
[117] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz
[11a] 1280 x 1024, 60Hz, 75Hz
[11d] 640 x 400, 70Hz
[122] 1600 x 1200, 60Hz
[133] 320 x 240, 72Hz
[13c] 1400 x 1050, 60Hz, 75Hz
[143] 400 x 300, 72Hz
[153] 512 x 384, 70Hz
[173] 720 x 480, 75Hz
[17e] 720 x 576, 75Hz
auto-dev: Could not find N: Name="Synaptics Synaptics TouchPad" and its handler entry H: Handlers= in /proc/bus/input/devices. So we are unable to auto-determine the synaptics touchpad device, falling back to psaux protocol and the Device Option.
Query no Synaptics: 6003C8
(EE) Mouse[1] no synaptics touchpad detected and no repeater device
(EE) Mouse[1] Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "Mouse[1]"
No core pointer
Fatal server error:
failed to initialize core devices
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
I've attached my XF86Config, which includes commented out remnants of
things I've tried.
Thanks!
-- David Benfell benfell@parts-unknown.org
This archive was generated by hypermail 2b29 : Thu Jul 31 2003 - 22:00:24 EST