(Paulo Andre)
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux-2.6.0-test1/drivers/char/ftape/lowlevel/fdc-io.c linux-2.6.0-test1-ac2/drivers/char/ftape/lowlevel/fdc-io.c
--- linux-2.6.0-test1/drivers/char/ftape/lowlevel/fdc-io.c 2003-07-10 21:06:12.000000000 +0100
+++ linux-2.6.0-test1-ac2/drivers/char/ftape/lowlevel/fdc-io.c 2003-07-15 18:01:29.000000000 +0100
@@ -66,6 +66,7 @@
/* Local vars.
*/
+static spinlock_t fdc_io_lock;
static unsigned int fdc_calibr_count;
static unsigned int fdc_calibr_time;
static int fdc_status;
@@ -89,14 +90,13 @@
{
unsigned long flags;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&fdc_io_lock, flags);
if (count == 0) {
ft_expected_stray_interrupts = 0;
} else {
ft_expected_stray_interrupts += count;
}
- restore_flags(flags);
+ spin_unlock_irqrestore(&fdc_io_lock, flags);
}
/* Wait during a timeout period for a given FDC status.
@@ -194,8 +194,7 @@
TRACE_FUN(ft_t_any);
fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&fdc_io_lock, flags);
if (!in_interrupt())
/* Yes, I know, too much comments inside this function
* ...
@@ -242,12 +241,11 @@
}
fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&fdc_io_lock, flags);
}
fdc_status = inb(fdc.msr);
if ((fdc_status & FDC_DATA_READY_MASK) != FDC_DATA_IN_READY) {
- restore_flags(flags);
+ spin_unlock_irqrestore(&fdc_io_lock, flags);
TRACE_ABORT(-EBUSY, ft_t_err, "fdc not ready");
}
fdc_mode = *cmd_data; /* used by isr */
@@ -289,7 +287,7 @@
last_time = ftape_timestamp();
}
#endif
- restore_flags(flags);
+ spin_unlock_irqrestore(&fdc_io_lock, flags);
TRACE_EXIT result;
}
@@ -305,15 +303,14 @@
int retry = 0;
TRACE_FUN(ft_t_any);
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&fdc_io_lock, flags);
fdc_status = inb(fdc.msr);
if ((fdc_status & FDC_DATA_READY_MASK) != FDC_DATA_OUT_READY) {
TRACE(ft_t_err, "fdc not ready");
result = -EBUSY;
} else while (count) {
if (!(fdc_status & FDC_BUSY)) {
- restore_flags(flags);
+ spin_unlock_irqrestore(&fdc_io_lock, flags);
TRACE_ABORT(-EIO, ft_t_err, "premature end of result phase");
}
result = fdc_read(res_data);
@@ -336,7 +333,7 @@
++res_data;
}
}
- restore_flags(flags);
+ spin_unlock_irqrestore(&fdc_io_lock, flags);
fdc_usec_wait(FT_RQM_DELAY); /* allow FDC to negate BSY */
TRACE_EXIT result;
}
@@ -609,8 +606,7 @@
unsigned long flags;
TRACE_FUN(ft_t_any);
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&fdc_io_lock, flags);
fdc_dor_reset(1); /* keep unit selected */
@@ -629,7 +625,7 @@
*/
fdc_update_dsr(); /* restore data rate and precomp */
- restore_flags(flags);
+ spin_unlock_irqrestore(&fdc_io_lock, flags);
/*
* Wait for first polling cycle to complete
@@ -928,8 +924,7 @@
*/
TRACE(ft_t_fdc_dma,
"phys. addr. = %lx", virt_to_bus((void*) buff->ptr));
- save_flags(flags);
- cli(); /* could be called from ISR ! */
+ spin_lock_irqsave(&fdc_io_lock, flags);
fdc_setup_dma(DMA_MODE_WRITE, buff->ptr, FT_SECTORS_PER_SEGMENT * 4);
/* Issue FDC command to start reading/writing.
*/
@@ -937,7 +932,7 @@
out[4] = buff->gap3;
TRACE_CATCH(fdc_setup_error = fdc_command(out, sizeof(out)),
restore_flags(flags); fdc_mode = fdc_idle);
- restore_flags(flags);
+ spin_unlock_irqrestore(&fdc_io_lock, flags);
TRACE_EXIT 0;
}
@@ -977,11 +972,10 @@
break;
default:
TRACE_ABORT(-EIO,
- ft_t_bug, "bug: illegal operation parameter");
+ ft_t_bug, "bug: invalid operation parameter");
}
TRACE(ft_t_fdc_dma, "phys. addr. = %lx",virt_to_bus((void*)buff->ptr));
- save_flags(flags);
- cli(); /* could be called from ISR ! */
+ spin_lock_irqsave(&fdc_io_lock, flags);
if (operation != FDC_VERIFY) {
fdc_setup_dma(dma_mode, buff->ptr,
FT_SECTOR_SIZE * buff->sector_count);
@@ -999,7 +993,7 @@
out[8] = 0xff; /* No limit to transfer size. */
TRACE(ft_t_fdc_dma, "C: 0x%02x, H: 0x%02x, R: 0x%02x, cnt: 0x%02x",
out[2], out[3], out[4], out[6] - out[4] + 1);
- restore_flags(flags);
+ spin_unlock_irqrestore(&fdc_io_lock, flags);
TRACE_CATCH(fdc_setup_error = fdc_command(out, 9),fdc_mode = fdc_idle);
TRACE_EXIT 0;
}
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux-2.6.0-test1/drivers/char/ftape/lowlevel/ftape-calibr.c linux-2.6.0-test1-ac2/drivers/char/ftape/lowlevel/ftape-calibr.c
--- linux-2.6.0-test1/drivers/char/ftape/lowlevel/ftape-calibr.c 2003-07-10 21:06:54.000000000 +0100
+++ linux-2.6.0-test1-ac2/drivers/char/ftape/lowlevel/ftape-calibr.c 2003-07-15 17:55:04.000000000 +0100
@@ -49,6 +49,8 @@
static unsigned long ps_per_cycle = 0;
#endif
+static spinlock_t calibr_lock;
+
/*
* Note: On Intel PCs, the clock ticks at 100 Hz (HZ==100) which is
* too slow for certain timeouts (and that clock doesn't even tick
@@ -75,13 +77,12 @@
__u16 lo;
__u16 hi;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&calibr_lock, flags);
outb_p(0x00, 0x43); /* latch the count ASAP */
lo = inb_p(0x40); /* read the latched count */
lo |= inb(0x40) << 8;
hi = jiffies;
- restore_flags(flags);
+ spin_unlock_irqrestore(&calibr_lock, flags);
return ((hi + 1) * (unsigned int) LATCH) - lo; /* downcounter ! */
#endif
}
@@ -94,12 +95,11 @@
unsigned int count;
unsigned long flags;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&calibr_lock, flags);
outb_p(0x00, 0x43); /* latch the count ASAP */
count = inb_p(0x40); /* read the latched count */
count |= inb(0x40) << 8;
- restore_flags(flags);
+ spin_unlock_irqrestore(&calibr_lock, flags);
return (LATCH - count); /* normal: downcounter */
#endif
}
@@ -150,14 +150,13 @@
int status;
TRACE_FUN(ft_t_any);
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&calibr_lock, flags);
t0 = short_ftape_timestamp();
for (i = 0; i < 1000; ++i) {
status = inb(fdc.msr);
}
t1 = short_ftape_timestamp();
- restore_flags(flags);
+ spin_unlock_irqrestore(&calibr_lock, flags);
TRACE(ft_t_info, "inb() duration: %d nsec", ftape_timediff(t0, t1));
TRACE_EXIT;
}
@@ -241,8 +240,7 @@
*calibr_count =
*calibr_time = count; /* set TC to 1 */
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&calibr_lock, flags);
fun(0); /* dummy, get code into cache */
t0 = short_ftape_timestamp();
fun(0); /* overhead + one test */
@@ -252,7 +250,7 @@
fun(count); /* overhead + count tests */
t1 = short_ftape_timestamp();
multiple = diff(t0, t1);
- restore_flags(flags);
+ spin_unlock_irqrestore(&calibr_lock, flags);
time = ftape_timediff(0, multiple - once);
tc = (1000 * time) / (count - 1);
TRACE(ft_t_any, "once:%3d us,%6d times:%6d us, TC:%5d ns",
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux-2.6.0-test1/drivers/char/ftape/lowlevel/ftape-format.c linux-2.6.0-test1-ac2/drivers/char/ftape/lowlevel/ftape-format.c
--- linux-2.6.0-test1/drivers/char/ftape/lowlevel/ftape-format.c 2003-07-10 21:09:33.000000000 +0100
+++ linux-2.6.0-test1-ac2/drivers/char/ftape/lowlevel/ftape-format.c 2003-07-15 17:55:04.000000000 +0100
@@ -44,6 +44,8 @@
#define FT_FMT_SEGS_PER_BUF (FT_BUFF_SIZE/(4*FT_SECTORS_PER_SEGMENT))
#endif
+static spinlock_t ftape_format_lock;
+
/*
* first segment of the new buffer
*/
@@ -129,9 +131,9 @@
head->status = formatting;
TRACE_CATCH(ftape_seek_head_to_track(track),);
TRACE_CATCH(ftape_command(QIC_LOGICAL_FORWARD),);
- save_flags(flags); cli();
+ spin_lock_irqsave(&ftape_format_lock, flags);
TRACE_CATCH(fdc_setup_formatting(head), restore_flags(flags));
- restore_flags(flags);
+ spin_unlock_irqrestore(&ftape_format_lock, flags);
TRACE_EXIT 0;
}
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux-2.6.0-test1/drivers/char/ftape/zftape/zftape-init.c linux-2.6.0-test1-ac2/drivers/char/ftape/zftape/zftape-init.c
--- linux-2.6.0-test1/drivers/char/ftape/zftape/zftape-init.c 2003-07-10 21:08:16.000000000 +0100
+++ linux-2.6.0-test1-ac2/drivers/char/ftape/zftape/zftape-init.c 2003-07-15 18:01:29.000000000 +0100
@@ -118,7 +118,7 @@
>
FTAPE_SEL_D) {
clear_bit(0,&busy_flag);
- TRACE_ABORT(-ENXIO, ft_t_err, "failed: illegal unit nr");
+ TRACE_ABORT(-ENXIO, ft_t_err, "failed: invalid unit nr");
}
orig_sigmask = current->blocked;
sigfillset(¤t->blocked);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jul 23 2003 - 22:00:34 EST