2.6.0-test1 gets corrupted data when loading init

From: Anders Gustafsson (andersg@0x63.nu)
Date: Fri Jul 18 2003 - 03:34:58 EST

Hi,

with 2.6.0-test1 I get error like unresolved symbol in libs used by init or
bad elf-file. Sometimes init manages to start and there are same type of
errors in bash when it tries to run initscripts. This is on a dual xeon, no
highmem (512M), ServerWorks chipset, aic79xx scsi, / on scsi.

It breaks between 2.5.70 and 2.5.70-bk1, which contains a update in the
aic79xx-drivers, so my guess is related to that.

Scsi-related hardware in machine:

scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.0
        <Adaptec AIC7902 Ultra320 SCSI adapter>
        aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs

scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.0
        <Adaptec AIC7902 Ultra320 SCSI adapter>
        aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs

(scsi1:A:0): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit)
  Vendor: SEAGATE Model: ST373307LW Rev: 0002
  Type: Direct-Access ANSI SCSI revision: 03
     

-- 
Anders Gustafsson - andersg@0x63.nu - http://0x63.nu/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Wed Jul 23 2003 - 22:00:32 EST